Regarding *GUACAMOLE-1026: Add support for FreeRDP3. **#517*
After compiling the code with freerdp3, making a docker image out of it and testing it out I am receiving the following error: *guacd[94]: WARNING: Support for protocol "rdp" is not installed.* [image: image] <https://private-user-images.githubusercontent.com/22887638/427649271-30697823-2666-4b41-ade8-1739e0b176c9.png?jwt=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.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.SxmS2OGUDre6aW0sAPI3SwuvyLGA4Ge3qpP1oUfa1uQ> I am trying to get this to work because we need to disable NTLM in our active directory. Starting FreeRDP v3, there are other protocols supported rather than NTLM. I was also receiving various errors with the current Dockerfile. This is my current custom working Dockerfile: # # Licensed to the Apache Software Foundation (ASF) under one # or more contributor license agreements. See the NOTICE file # distributed with this work for additional information # regarding copyright ownership. The ASF licenses this file # to you under the Apache License, Version 2.0 (the # "License"); you may not use this file except in compliance # with the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, # software distributed under the License is distributed on an # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY # KIND, either express or implied. See the License for the # specific language governing permissions and limitations # under the License. # # # Dockerfile for guacamole-server # # The Alpine Linux image that should be used as the basis for the guacd image # NOTE: Using 3.18 because the required openssl1.1-compat-dev package was # removed in more recent versions. ARG ALPINE_BASE_IMAGE=3.18 FROM alpine:${ALPINE_BASE_IMAGE} AS builder # FreeRDP version (default to version 3) ARG FREERDP_VERSION=3 # Install build dependencies RUN apk add --no-cache \ autoconf \ automake \ build-base \ cairo-dev \ cjson-dev \ cmake \ cunit-dev \ git \ grep \ krb5-dev \ libjpeg-turbo-dev \ libpng-dev \ libtool \ libwebp-dev \ make \ openssl1.1-compat-dev \ pango-dev \ pulseaudio-dev \ sdl2-dev \ sdl2_ttf-dev \ util-linux-dev \ webkit2gtk-dev \ nasm \ cups-dev \ fuse3-dev \ libusb-dev \ ffmpeg-dev # Copy source to container for sake of build ARG BUILD_DIR=/tmp/guacamole-server COPY . ${BUILD_DIR} # # Base directory for installed build artifacts. # # NOTE: Due to limitations of the Docker image build process, this value is # duplicated in an ARG in the second stage of the build. # ARG PREFIX_DIR=/opt/guacamole # # Automatically select the latest versions of each core protocol support # library (these can be overridden at build time if a specific version is # needed) # ARG WITH_FREERDP="${FREERDP_VERSION}(\.\d+)+" ARG WITH_LIBSSH2='libssh2-\d+(\.\d+)+' ARG WITH_LIBTELNET='\d+(\.\d+)+' ARG WITH_LIBVNCCLIENT='LibVNCServer-\d+(\.\d+)+' ARG WITH_LIBWEBSOCKETS='v\d+(\.\d+)+' # # Default build options for each core protocol support library, as well as # guacamole-server itself (these can be overridden at build time if different # options are needed) # ARG FREERDP_OPTS="\ -DBUILTIN_CHANNELS=OFF \ -DCHANNEL_URBDRC=OFF \ -DWITH_ALSA=OFF \ -DWITH_CAIRO=ON \ -DWITH_CHANNELS=ON \ -DWITH_CLIENT=ON \ -DWITH_CUPS=OFF \ -DWITH_DIRECTFB=OFF \ -DWITH_FFMPEG=OFF \ -DWITH_FUSE=OFF \ -DWITH_GSM=OFF \ -DWITH_GSSAPI=OFF \ -DWITH_IPP=OFF \ -DWITH_JPEG=ON \ -DWITH_KRB5=ON \ -DWITH_LIBSYSTEMD=OFF \ -DWITH_MANPAGES=OFF \ -DWITH_OPENH264=OFF \ -DWITH_OPENSSL=ON \ -DWITH_OSS=OFF \ -DWITH_PCSC=OFF \ -DWITH_PKCS11=OFF \ -DWITH_PULSE=OFF \ -DWITH_SERVER=OFF \ -DWITH_SERVER_INTERFACE=OFF \ -DWITH_SHADOW_MAC=OFF \ -DWITH_SHADOW_X11=OFF \ -DWITH_SSE2=ON \ -DWITH_SWSCALE=OFF \ -DWITH_WAYLAND=OFF \ -DWITH_X11=OFF \ -DWITH_X264=OFF \ -DWITH_XCURSOR=ON \ -DWITH_XEXT=ON \ -DWITH_XI=OFF \ -DWITH_XINERAMA=OFF \ -DWITH_XKBFILE=ON \ -DWITH_XRENDER=OFF \ -DWITH_XTEST=OFF \ -DWITH_XV=OFF \ -DWITH_ZLIB=ON" ARG GUACAMOLE_SERVER_OPTS="\ --disable-guaclog" ARG LIBSSH2_OPTS="\ -DBUILD_EXAMPLES=OFF \ -DBUILD_SHARED_LIBS=ON" ARG LIBTELNET_OPTS="\ --disable-static \ --disable-util" ARG LIBVNCCLIENT_OPTS="" ARG LIBWEBSOCKETS_OPTS="\ -DDISABLE_WERROR=ON \ -DLWS_WITHOUT_SERVER=ON \ -DLWS_WITHOUT_TESTAPPS=ON \ -DLWS_WITHOUT_TEST_CLIENT=ON \ -DLWS_WITHOUT_TEST_PING=ON \ -DLWS_WITHOUT_TEST_SERVER=ON \ -DLWS_WITHOUT_TEST_SERVER_EXTPOLL=ON \ -DLWS_WITH_STATIC=OFF" # Build guacamole-server and its core protocol library dependencies # Build FreeRDP RUN git clone https://github.com/FreeRDP/FreeRDP.git /tmp/FreeRDP WORKDIR /tmp/FreeRDP RUN git checkout 3.8.0 RUN mkdir /tmp/FreeRDP/build WORKDIR /tmp/FreeRDP/build RUN cmake .. RUN cmake --build . RUN cmake --install . RUN ${BUILD_DIR}/src/guacd-docker/bin/build-all.sh #I ve commented out the FreeRDP installation because of errors. # Determine location of the FREERDP library based on the version. ARG FREERDP_LIB_PATH=${PREFIX_DIR}/lib/freerdp${FREERDP_VERSION} # Record the packages of all runtime library dependencies RUN ${BUILD_DIR}/src/guacd-docker/bin/list-dependencies.sh \ ${PREFIX_DIR}/sbin/guacd \ ${PREFIX_DIR}/lib/libguac-client-*.so \ ${FREERDP_LIB_PATH}/*guac*.so \ > ${PREFIX_DIR}/DEPENDENCIES # Use same Alpine version as the base for the runtime image FROM alpine:${ALPINE_BASE_IMAGE} # # Base directory for installed build artifacts. See also the # CMD directive at the end of this build stage. # # NOTE: Due to limitations of the Docker image build process, this value is # duplicated in an ARG in the first stage of the build. # ARG PREFIX_DIR=/opt/guacamole # Runtime environment ENV LC_ALL=C.UTF-8 ENV LD_LIBRARY_PATH=${PREFIX_DIR}/lib ENV GUACD_LOG_LEVEL=info # Copy build artifacts into this stage COPY --from=builder ${PREFIX_DIR} ${PREFIX_DIR} # Bring runtime environment up to date and install runtime dependencies RUN apk add --no-cache \ ca-certificates \ font-noto-cjk \ ghostscript \ netcat-openbsd \ shadow \ terminus-font \ ttf-dejavu \ ttf-liberation \ util-linux-login && \ xargs apk add --no-cache < ${PREFIX_DIR}/DEPENDENCIES # Checks the operating status every 5 minutes with a timeout of 5 seconds HEALTHCHECK --interval=5m --timeout=5s CMD nc -z 127.0.0.1 4822 || exit 1 # Create a new user guacd ARG UID=1000 ARG GID=1000 RUN groupadd --gid $GID guacd RUN useradd --system --create-home --shell /sbin/nologin --uid $UID --gid $GID guacd # Run with user guacd USER guacd # Expose the default listener port EXPOSE 4822 # Start guacd, listening on port 0.0.0.0:4822 # # Note the path here MUST correspond to the value specified in the # PREFIX_DIR build argument. # CMD /opt/guacamole/sbin/guacd -b 0.0.0.0 -L $GUACD_LOG_LEVEL -f
