Vadim,
Looks better now. Can you also try to modify the benchmark so that
marshaller and writer are created outside of the measured method? I.e. the
benchmark methods should be as simple as this:
@Benchmark
public void binaryHeapOutputStreamDirect() throws Exception {
writer.doWriteStringDirect(message);
}
@Benchmark
public void binaryHeapOutputStreamInDirect() throws Exception {
writer.doWriteString(message);
}
In any case, do I understand correctly that it didn't actually make any
performance difference? If so, I think we can close the ticket.
Vova, can you also take a look and provide your thoughts?
-Val
On Thu, Mar 2, 2017 at 1:27 PM, Вадим Опольский <vaopols...@gmail.com>
wrote:
> Hi Valentin!
>
> I've created:
>
> new method strToUtf8BytesDirect in BinaryUtilsNew
> https://github.com/javaller/MyBenchmark/blob/master/src/main
> /java/org/sample/BinaryUtilsNew.java
>
> new method doWriteStringDirect in BinaryWriterExImplNew
> https://github.com/javaller/MyBenchmark/blob/master/src/main
> /java/org/sample/BinaryWriterExImplNew.java
>
> benchmarks for BinaryWriterExImpl doWriteString and BinaryWriterExImplNew
> doWriteStringDirect
> https://github.com/javaller/MyBenchmark/blob/master/src/main
> /java/org/sample/ExampleTest.java
>
> This is a result of comparing:
>
> Benchmark
> Mode Cnt Score Error UnitsExampleTest.
> binaryHeapOutputStreamDirect avgt 50 1128448,743 ± 13536,689
> ns/opExampleTest.binaryHeapOutputStreamInDirect avgt 50 1127270,695 ±
> 17309,256 ns/op
>
> Vadim
>
> 2017-03-02 1:02 GMT+03:00 Valentin Kulichenko <
> valentin.kuliche...@gmail.com>:
>
>> Hi Vadim,
>>
>> We're getting closer :) I would actually like to see the test for actual
>> implementation of BinaryWriterExImpl#doWriteString method. Logic in
>> binaryHeapOutputInDirect() confuses me a bit and I'm not sure comparison is
>> valid.
>>
>> Can you please do the following:
>>
>> 1. Create new BinaryUtils#strToUtf8BytesDirect method, copy-paste the
>> code from existing BinaryUtils#strToUtf8Bytes and modify it so that it
>> takes BinaryOutputStream as an argument and writes to it directly. Do not
>> create stream inside this method, as it's the same as creating new array.
>> 2. Create new BinaryWriterExImpl#doWriteStringDirect, copy-paste the
>> code from existing BinaryWriterExImpl#doWriteString and modify it so
>> that it uses BinaryUtils#strToUtf8BytesDirect and doesn't
>> call out.writeByteArray.
>> 3. Create benchmark for BinaryWriterExImpl#doWriteString method. I.e.,
>> create an instance of BinaryWriterExImpl and call doWriteString() in
>> benchmark method.
>> 4. Similarly, create benchmark for BinaryWriterExImpl#doWriteStri
>> ngDirect.
>> 5. Compare results.
>>
>> This will give us clear picture of how these two approaches perform. Your
>> current results are actually promising, but I would like to confirm them.
>>
>> -Val
>>
>> On Wed, Mar 1, 2017 at 6:17 AM, Вадим Опольский <vaopols...@gmail.com>
>> wrote:
>>
>>> Hi Valentin!
>>>
>>> Thank you for comments.
>>>
>>> There is a new method which writes directly to BinaryOutputStream
>>> instead of intermediate array.
>>> https://github.com/javaller/MyBenchmark/blob/master/src/main
>>> /java/org/sample/BinaryUtilsNew.java
>>>
>>> There is benchmark.
>>> https://github.com/javaller/MyBenchmark/blob/master/src/main
>>> /java/org/sample/MyBenchmark.java
>>>
>>> Unit test
>>> https://github.com/javaller/MyBenchmark/blob/master/src/main
>>> /java/org/sample/BinaryOutputStreamTest.java
>>>
>>> Statistics
>>> https://github.com/javaller/MyBenchmark/blob/master/out_01_03_17.txt
>>>
>>> Benchmark
>>> Mode Cnt Score Error Units MyBenchmark.binaryHeapOutputIn
>>> Direct avgt 50 111,337 ± 0,742 ns/op
>>> MyBenchmark.binaryHeapOutputStreamDirect avgt 50 23,847 ±
>>> 0,303 ns/op
>>>
>>>
>>> Vadim
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> 2017-02-28 4:29 GMT+03:00 Valentin Kulichenko <
>>> valentin.kuliche...@gmail.com>:
>>>
>>>> Hi Vadim,
>>>>
>>>> Looks like you accidentally removed dev list from the thread, adding it
>>>> back.
>>>>
>>>> I think there is still misunderstanding. What I propose is to modify
>>>> the BinaryUtils#strToUtf8Bytes so that it writes directly to
>>>> BinaryOutputStream
>>>> instead of intermediate array. This should decrease memory consumption and
>>>> can also increase performance as we will avoid 'writeByteArray' step
>>>> at the end.
>>>>
>>>> Does it make sense to you?
>>>>
>>>> -Val
>>>>
>>>> On Mon, Feb 27, 2017 at 6:55 AM, Вадим Опольский <vaopols...@gmail.com>
>>>> wrote:
>>>>
>>>>> Hi, Valentin!
>>>>>
>>>>> What do you think about using the methods of BinaryOutputStream:
>>>>>
>>>>> 1) writeByteArray(byte[] val)
>>>>> 2) writeCharArray(char[] val)
>>>>> 3) write (byte[] arr, int off, int len)
>>>>>
>>>>> String val = "Test";
>>>>> out.writeByteArray( val.getBytes(UTF_8));
>>>>>
>>>>> String val = "Test";
>>>>> out.writeCharArray(str.toCharArray());
>>>>>
>>>>> String val = "Test"
>>>>> InputStream stream = new ByteArrayInputStream(
>>>>> exampleString.getBytes(StandartCharsets.UTF_8));
>>>>> byte[] buffer = new byte[1024];
>>>>> while ((buffer = stream.read()) != -1) {
>>>>> out.writeByteArray(buffer);
>>>>> }
>>>>>
>>>>> What else can we use ?
>>>>>
>>>>> Vadim
>>>>>
>>>>>
>>>>> 2017-02-25 2:21 GMT+03:00 Valentin Kulichenko <
>>>>> valentin.kuliche...@gmail.com>:
>>>>>
>>>>>> Hi Vadim,
>>>>>>
>>>>>> Which method implements the approach described in the ticket? From
>>>>>> what I see, all writeToStringX versions are still encoding into an
>>>>>> intermediate array and then call out.writeByteArray. What we need to test
>>>>>> is the approach where bytes are written directly into the stream during
>>>>>> encoding. Encoding algorithm itself should stay the same for now,
>>>>>> otherwise
>>>>>> we will not know how to interpret the result.
>>>>>>
>>>>>> It looks like there is some misunderstanding here, so please let me
>>>>>> know anything is still unclear. I will be happy to answer your questions.
>>>>>>
>>>>>> -Val
>>>>>>
>>>>>> On Wed, Feb 22, 2017 at 7:22 PM, Valentin Kulichenko <
>>>>>> valentin.kuliche...@gmail.com> wrote:
>>>>>>
>>>>>>> Hi Vadim,
>>>>>>>
>>>>>>> Thanks, I will review this week.
>>>>>>>
>>>>>>> -Val
>>>>>>>
>>>>>>> On Wed, Feb 22, 2017 at 2:28 AM, Вадим Опольский <
>>>>>>> vaopols...@gmail.com> wrote:
>>>>>>>
>>>>>>>> Hi Valentin!
>>>>>>>>
>>>>>>>> https://issues.apache.org/jira/browse/IGNITE-13
>>>>>>>>
>>>>>>>> I created BinaryWriterExImplNew (extended of BinaryWriterExImpl) and
>>>>>>>> added new methods with changes described in the ticket
>>>>>>>>
>>>>>>>> https://github.com/javaller/MyBenchmark/blob/master/src/main
>>>>>>>> /java/org/sample/BinaryWriterExImplNew.java
>>>>>>>>
>>>>>>>> I created a benchmark for BinaryWriterExImplNew
>>>>>>>>
>>>>>>>> https://github.com/javaller/MyBenchmark/blob/master/src/main
>>>>>>>> /java/org/sample/ExampleTest.java
>>>>>>>>
>>>>>>>> I run benchmark and compared results
>>>>>>>>
>>>>>>>> https://github.com/javaller/MyBenchmark/blob/master/totalstat.txt
>>>>>>>>
>>>>>>>> # Run complete. Total time: 00:10:24
>>>>>>>> Benchmark Mode Cnt
>>>>>>>> Score Error Units
>>>>>>>> ExampleTest.binaryHeapOutputStream1 avgt 50
>>>>>>>> 1114999,207 ± 16756,776 ns/op
>>>>>>>> ExampleTest.binaryHeapOutputStream2 avgt 50
>>>>>>>> 1118149,320 ± 17515,961 ns/op
>>>>>>>> ExampleTest.binaryHeapOutputStream3 avgt 50
>>>>>>>> 1113678,657 ± 17652,314 ns/op
>>>>>>>> ExampleTest.binaryHeapOutputStream4 avgt 50
>>>>>>>> 1112415,051 ± 18273,874 ns/op
>>>>>>>> ExampleTest.binaryHeapOutputStream5 avgt 50
>>>>>>>> 1111366,583 ± 18282,829 ns/op
>>>>>>>> ExampleTest.binaryHeapOutputStreamACSII avgt 50 1112079,667 ±
>>>>>>>> 16659,532 ns/op
>>>>>>>> ExampleTest.binaryHeapOutputStreamUTFCustom avgt 50
>>>>>>>> 1114949,759 ± 16809,669 ns/op
>>>>>>>> ExampleTest.binaryHeapOutputStreamUTFNIO avgt 50
>>>>>>>> 1121462,325 ± 19836,466 ns/op
>>>>>>>>
>>>>>>>> Is it OK? Whats the next step? Do I have to move this JMH benchmark
>>>>>>>> to the Ignite project ?
>>>>>>>>
>>>>>>>> Vadim Opolski
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> 2017-02-21 1:06 GMT+03:00 Valentin Kulichenko <
>>>>>>>> valentin.kuliche...@gmail.com>:
>>>>>>>>
>>>>>>>>> Hi Vadim,
>>>>>>>>>
>>>>>>>>> I'm not sure I understand your benchmarks and how they verify the
>>>>>>>>> optimization discussed here. Basically, here is what needs to be done:
>>>>>>>>>
>>>>>>>>> 1. Create a benchmark for BinaryWriterExImpl#doWriteString method.
>>>>>>>>> 2. Run the benchmark with current implementation.
>>>>>>>>> 3. Make the change described in the ticket.
>>>>>>>>> 4. Run the benchmark with these changes.
>>>>>>>>> 5. Compare results.
>>>>>>>>>
>>>>>>>>> Makes sense? Let me know if anything is unclear.
>>>>>>>>>
>>>>>>>>> -Val
>>>>>>>>>
>>>>>>>>> On Mon, Feb 20, 2017 at 8:51 AM, Вадим Опольский <
>>>>>>>>> vaopols...@gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hello everybody!
>>>>>>>>>>
>>>>>>>>>> https://issues.apache.org/jira/browse/IGNITE-13
>>>>>>>>>>
>>>>>>>>>> Valentin, I just have finished benchmark (with JMH) -
>>>>>>>>>> https://github.com/javaller/MyBenchmark.git
>>>>>>>>>>
>>>>>>>>>> It collect data about time working of serialization.
>>>>>>>>>>
>>>>>>>>>> For instance - https://github.com/javaller/My
>>>>>>>>>> Benchmark/blob/master/out200217.txt
>>>>>>>>>>
>>>>>>>>>> To start it you have to do next:
>>>>>>>>>>
>>>>>>>>>> 1) clone it - git colne https://github.com/javal
>>>>>>>>>> ler/MyBenchmark.git
>>>>>>>>>>
>>>>>>>>>> 2) install it - mvn install
>>>>>>>>>>
>>>>>>>>>> 3) run benchmarks - java -Xms1024m -Xmx4096m -jar
>>>>>>>>>> target\benchmarks.jar
>>>>>>>>>>
>>>>>>>>>> Vadim Opolski
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2017-02-15 0:52 GMT+03:00 Valentin Kulichenko <
>>>>>>>>>> valentin.kuliche...@gmail.com>:
>>>>>>>>>>
>>>>>>>>>>> Vladimir,
>>>>>>>>>>>
>>>>>>>>>>> I think we misunderstood each other. My understanding of this
>>>>>>>>>>> optimization is the following.
>>>>>>>>>>>
>>>>>>>>>>> Currently string serialization is done in two steps (see
>>>>>>>>>>> BinaryWriterExImpl#doWriteString):
>>>>>>>>>>>
>>>>>>>>>>> strArr = BinaryUtils.strToUtf8Bytes(val); // Encode string into
>>>>>>>>>>> byte array.
>>>>>>>>>>> out.writeByteArray(strArr); // Write byte
>>>>>>>>>>> array into stream.
>>>>>>>>>>>
>>>>>>>>>>> What this ticket suggests is to write directly into stream while
>>>>>>>>>>> string is encoded, without intermediate array. This both reduces
>>>>>>>>>>> memory
>>>>>>>>>>> consumption and eliminates array copy step.
>>>>>>>>>>>
>>>>>>>>>>> I updated the ticket and added this explanation there.
>>>>>>>>>>>
>>>>>>>>>>> Vadim, can you create a micro benchmark and check if it gives
>>>>>>>>>>> any improvement?
>>>>>>>>>>>
>>>>>>>>>>> -Val
>>>>>>>>>>>
>>>>>>>>>>> On Sun, Feb 12, 2017 at 10:38 PM, Vladimir Ozerov <
>>>>>>>>>>> voze...@gridgain.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> It is hard to say whether it makes sense or not. No doubt, it
>>>>>>>>>>>> could speed up marshalling process at the cost of 2x memory
>>>>>>>>>>>> required for
>>>>>>>>>>>> strings. From my previous experience with marshalling
>>>>>>>>>>>> micro-optimizations,
>>>>>>>>>>>> we will hardly ever notice speedup in distributed environment.
>>>>>>>>>>>>
>>>>>>>>>>>> But, there is another sied - it could speedup our queries,
>>>>>>>>>>>> because we will not have to unmarshal string on every field
>>>>>>>>>>>> access. So I
>>>>>>>>>>>> would try to make this optimization optional and then measure query
>>>>>>>>>>>> performance with classes having lots of strings. It could give us
>>>>>>>>>>>> interesting results.
>>>>>>>>>>>>
>>>>>>>>>>>> On Mon, Feb 13, 2017 at 5:37 AM, Valentin Kulichenko <
>>>>>>>>>>>> valentin.kuliche...@gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Vladimir,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Can you please take a look and provide your thoughts? Can this
>>>>>>>>>>>>> be applied to binary marshaller? From what I recall, it
>>>>>>>>>>>>> serializes string a
>>>>>>>>>>>>> bit differently from optimized marshaller, so I'm not sure.
>>>>>>>>>>>>>
>>>>>>>>>>>>> -Val
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Fri, Feb 10, 2017 at 5:16 PM, Dmitriy Setrakyan <
>>>>>>>>>>>>> dsetrak...@apache.org> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Thu, Feb 9, 2017 at 11:26 PM, Valentin Kulichenko <
>>>>>>>>>>>>>> valentin.kuliche...@gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> > Hi Vadim,
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> > I don't think it makes much sense to invest into
>>>>>>>>>>>>>> OptimizedMarshaller.
>>>>>>>>>>>>>> > However, I would check if this optimization is applicable to
>>>>>>>>>>>>>> > BinaryMarshaller, and if yes, implement it.
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Val, in this case can you please update the ticket?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> > -Val
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> > On Thu, Feb 9, 2017 at 11:05 PM, Вадим Опольский <
>>>>>>>>>>>>>> vaopols...@gmail.com>
>>>>>>>>>>>>>> > wrote:
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> > > Dear sirs!
>>>>>>>>>>>>>> > >
>>>>>>>>>>>>>> > > I want to resolve issue IGNITE-13 -
>>>>>>>>>>>>>> > > https://issues.apache.org/jira/browse/IGNITE-13
>>>>>>>>>>>>>> > >
>>>>>>>>>>>>>> > > Is it actual?
>>>>>>>>>>>>>> > >
>>>>>>>>>>>>>> > > Vadim Opolski
>>>>>>>>>>>>>> > >
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
