Dear: Wechat group "Apache Linkis(incubating) community Development group "chat records are as follows: 微信群"Apache Linkis(incubating) 社区开发群"的聊天记录如下:
————— 2022-11-7 ————— Mr. Flash 16:56 @enjoyyin_Yin Qiang @WDS Please ask Brother Yin Qiang, I have installed two schedulis and dolphinschedule, I find it is not possible to release them to ds workflow, but schedulis is still available. Note that part of the publishing process failed because the change Project contains workflows that point to multiple scheduling systems. Is there any configuration item wrong in this case? Now the new process is OK, but not published Enjoyyin_yin Qiang @WDS 17:15 There should be a specific error message at the end Enjoyyin_yin Qiang @WDS 17:15 Do you have screenshots? Mr. Flash at 17:30 Let me reboot it Mr. Flash 20:10 @enjoyyin_Yin Qiang @WDS In fact, if two scheduling software are accessed at the same time, it will not interfere with each other normally, right? Enjoyyin_yin Qiang @WDS 20:33 Don't Enjoyyin_yin Qiang @WDS 20:34 Neither DolphinScheduler nor Schedulis workflows can be created in a project Mr. Flash 20:35 Good to debug tomorrow Enjoyyin_yin Qiang @WDS 20:35 A project that only connects to a single scheduling system is even more unaffected ————— 2022-11-8 ————— Mr. Flash 14:58 @enjoyyin_Yin Qiang @WDS Check this out Mr. Flash 14:59 This linkis.control.empty has no x and y coordinates resulting in failure Mr. Flash 14:59 Is this generated by default or something that I didn't add this node myself Enjoyyin_yin Qiang @WDS 15:02 Was there no layout when it was released Mr. Flash 15:04 Is that the reason... It seems that there is no way to set the layout Mr. Flash 15:12 @enjoyyin_Yin Qiang @WDS has restarted workflow-server and is fine without this node... Enjoyyin_yin Qiang @WDS 15:17 I guess you dragged this node and saved it Enjoyyin_yin Qiang @WDS 15:19 It's automatically saved 闪电先生 16:56 @Enjoyyin_尹强@WDS 尹强兄，请问一下，我现在安装了二个调度schedulis和 dolphinschedule，现在发现无法发布到ds这个工作流了，但是schedulis还是可以的。 提示，由于改Project包含指向多个调度系统的工作流，发布过程中有一部分失败了。 这种情况是有什么配置项错了吗？ 现在是新建流程是可以的，就是不能发布 Enjoyyin_尹强@WDS 17:15 后面应该有具体报错信息 Enjoyyin_尹强@WDS 17:15 有截图么 闪电先生 17:30 我重启看看 闪电先生 20:10 @Enjoyyin_尹强@WDS 其实如果同时接入了二个调度软件，正常是不会互相干扰的吧? Enjoyyin_尹强@WDS 20:33 不会 Enjoyyin_尹强@WDS 20:34 一个project里面既建DolphinScheduler工作流，又建Schedulis工作流，都不影响 闪电先生 20:35 好 明天debug看看 Enjoyyin_尹强@WDS 20:35 一个project只对接单个调度系统就更加不受影响了 ————— 2022-11-8 ————— 闪电先生 14:58 @Enjoyyin_尹强@WDS 看看这个 闪电先生 14:59 这个linkis.control.empty 没有x y坐标导致失败 闪电先生 14:59 这个是默认生成的还是什么东西，我自己没有添加这个node Enjoyyin_尹强@WDS 15:02 是发布的时候没有layout吗 闪电先生 15:04 是这个原因吗……好像layout也没有办法设置的呀 闪电先生 15:12 @Enjoyyin_尹强@WDS 重启了workflow-server 没有了这个节点 又好了…… Enjoyyin_尹强@WDS 15:17 估计是你之前拖了这个节点，然后保存了 Enjoyyin_尹强@WDS 15:19 自动保存了 -- Best Regards ------ 康悦 ritakang GitHub：Ritakang0451 E-mail：rita0...@163.com
