Jedit + it has plugins for coldfusion Alex
-----Original Message----- From: Tim Blair [mailto:[EMAIL PROTECTED]] Sent: 04 December 2002 09:55 To: [EMAIL PROTECTED] Subject: [ cf-dev ] OT: Linux IDE for CF Hey everyone, Does anyone have any suggestions for an IDE for developing CF under Linux? At the moment I'm using a combination of kate and vi, but I was wondering if there was anything more suitable to CF? Cheers, Tim. ------------------------------------------------------- Tim Blair Web Application Engineer, Rawnet Limited Direct Phone : +44 (0) 1344 393 441 Switchboard : +44 (0) 1344 393 040 ------------------------------------------------------- rawnet ltd Atrium Court Bracknell [EMAIL PROTECTED] Berkshire Tel : +44 (0) 1344 393 040 RG12 1BW, UK http://www.rawnet.com ------------------------------------------------------- This message may contain information which is legally privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any unauthorised disclosure, copying, distribution or use of this information is strictly prohibited. Such notification notwithstanding, any comments, opinions, information or conclusions expressed in this message are those of the originator, not of rawnet limited, unless otherwise explicitly and independently indicated by an authorised representative of rawnet limited. ------------------------------------------------------- -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED] -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED]
