you can do this through the cf admin... D -----Original Message----- From: Tim Blair [mailto:[EMAIL PROTECTED]] Sent: 17 December 2002 18:05 To: [EMAIL PROTECTED] Subject: [ cf-dev ] 404 handling
Brain ache, Is there any way to set on a per-site basis (say in Application.cfm) a template to use if a 404 error occurs when trying to call a .cfm page? Ta. Tim. ------------------------------------------------------- Tim Blair Web Application Engineer, Rawnet Limited Direct Phone : +44 (0) 1344 393 441 Switchboard : +44 (0) 1344 393 040 ------------------------------------------------------- rawnet ltd Atrium Court Bracknell [EMAIL PROTECTED] Berkshire Tel : +44 (0) 1344 393 040 RG12 1BW, UK http://www.rawnet.com ------------------------------------------------------- This message may contain information which is legally privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any unauthorised disclosure, copying, distribution or use of this information is strictly prohibited. Such notification notwithstanding, any comments, opinions, information or conclusions expressed in this message are those of the originator, not of rawnet limited, unless otherwise explicitly and independently indicated by an authorised representative of rawnet limited. ------------------------------------------------------- -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED] -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED]
