> or log it to a text file, or to a table That'll do for now...
We're seeing strange results in that the flash app works fine, but then all of a sudden it starts showing results "late". In that, I mean it's as if two remote calls are being made instead of one, but Flash only sees one come back until the next remoting call (in our case user action) whereupon it gets back the second call information instead of the correct result for the user action. This will then continue, as if the calls are being made "one behid". It's like the results are being queued? The correct information is definitely being sent with the function calls to the CFC, but the results are incorrect... That's probably not explained very well, but you get the idea, I hope! Any helpful advice? Tim. ------------------------------------------------------- OUR NEW SITE IS NOW LIVE Visit our new website at http://www.rawnet.com/ and race around the beautiful Bracknell streets at http://xmas.rawnet.com/ ------------------------------------------------------- Tim Blair Web Application Engineer, Rawnet Limited Direct Phone : +44 (0) 1344 393 441 Switchboard : +44 (0) 1344 393 040 ------------------------------------------------------- This message may contain information which is legally privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any unauthorised disclosure, copying, distribution or use of this information is strictly prohibited. Such notification notwithstanding, any comments, opinions, information or conclusions expressed in this message are those of the originator, not of rawnet limited, unless otherwise explicitly and independently indicated by an authorised representative of rawnet limited. ------------------------------------------------------- -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED]
