You mean on the CF5 box? My CF5 was installed from a MM CD that came with DW (and for various other reasons, I had to install it again yesterday, so was able to verify the 1.3.0_02 bit). Once I downloaded the current 1.4.1_05 and installed, pointed the CF admin at the updated jvm, everything worked, albeit at a comparative snails pace.
Cheers Terry ----------Original Message--------- > Ta tis 1.4 on the box > > -----Original Message----- > From: Terry Riley [mailto:[EMAIL PROTECTED] > Sent: 18 September 2003 09:58 > To: [EMAIL PROTECTED] > Subject: Re: [ cf-dev ] FuseBox 4 and CF5 > > Just in case anyone else has been having this problem, it is down to the > > JRE that you are using. It *does* require better than 1.3.1; the one > supplied with CF5 was 1.3.0_02....... > > Though having got it to work, it is SLOW! > > Cheers > Terry > > ----------Original Message--------- > > > Has anyone here managed to set this up so that it actually works? > > > > I've not done any CFX stuff in CF5, and quite frankly, all the > JVM/Java > > paths in admin are confusing to the novice.... > > > > The CFX_xmlTools.jar is in the \cfx directory, the supplementary > > xmlXXX.cfm files are in the \CustomTags directory, and I thought I had > > > followed the instructions correctly in setting up the admin paths, but > > > I seem to get nothing but error messages. > > > > The fusebox site isn't a great deal of help, either - firstly by (as > > far as I can see) omitting to tell you that the cfx_xmlTools kit is > > required, or where to get it from! > > > > Any assistance greatly appreciated. > > > > Cheers > > Terry -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED]
