> Can anyone (with a working cfchart) tell me what happens if > you try and load yourdomain/cfide/graphdata.cfm ?
Running MX6.1 with charting working fine in both production and development - calling /cfide/graphdata.cfm results in a 404, but /CFIDE/GraphData.cfm works fine (we're running linux - case sensitive). Tim. ------------------------------------------------------- RAWNET LTD - Internet, New Media and ebusiness Gurus. Visit our new website at http://www.rawnet.com for more information about our company, or call us free anytime on 0800 294 24 24. ------------------------------------------------------- Tim Blair Web Application Engineer, Rawnet Limited Direct Phone : +44 (0) 1344 393 441 Switchboard : +44 (0) 1344 393 040 ------------------------------------------------------- This message may contain information which is legally privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any unauthorised disclosure, copying, distribution or use of this information is strictly prohibited. Such notification notwithstanding, any comments, opinions, information or conclusions expressed in this message are those of the originator, not of rawnet limited, unless otherwise explicitly and independently indicated by an authorised representative of rawnet limited. ------------------------------------------------------- -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED]
