can't you add a MessageID using the <cf_advancedmailparam> tag?
Duncan Cumming IT Manager http://www.alienationdesign.co.uk mailto:[EMAIL PROTECTED] Tel: 0141 575 9700 Fax: 0141 575 9600 Creative solutions in a technical world ---------------------------------------------------------------------- Get your domain names online from: http://www.alienationdomains.co.uk Reseller options available! ---------------------------------------------------------------------- ---------------------------------------------------------------------- "Snake Hollywood" To: <[EMAIL PROTECTED]> <[EMAIL PROTECTED] cc: kepit.net> Subject: [ cf-dev ] cfadvancedmail 11/02/2004 11:48 Please respond to dev We have a site using cf_advancedmail and have a few problems due to what the tag doesn't do. I know a few of you here use this tag so wondered if anyone has fixed these issues already and may have an improved tag I can nab. MessageID The message ID problem is about RFC2822 that says that a Message ID: field in email headers is strongly advised. Some ISPs are now bouncing mail that doesn't have a Message ID: because "they are usually spam" CFAdvancedEmail doesn't do Message ID The other problem is 'naked line feeds' RFC 822 and later make it clear that the maximum length of a data line in SMTP is 1000 bytes "including the terminating CRLF pair" CFAdvancedmail (or perhaps it's CF) seems to strip out the CR and just leaves the LF, so lines can build up to over 1000 chars 95% of servers don't give a toss, but 5% reject the mail Russ -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED] -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED]
