When plugging an USB device (Terratec Cinergy Piranha, USB ID 187f:0010) to Compal JAX10 running Midinux version CP.011.4006 it is recognized in the bus and listed in the output of "lsusb" command, however it disappears from the list after couple of seconds. Re-running lsusb does not show the device anymore.
I get following error messages in kernel log: usb 2-1: new full speed USB device using uhci_hcd and address 10 usb 2-1: configuration #1 chosen from 1 choice Call uvc_resume................................ Call uvc_resume................................ Call uvc_resume................................ Call uvc_resume................................ Call uvc_suspend................................ Call uvc_suspend................................ Call uvc_suspend................................ Call uvc_suspend................................ usb 2-1: USB disconnect, address 10 usb 2-1: new full speed USB device using uhci_hcd and address 11 usb 2-1: configuration #1 chosen from 1 choice Call uvc_resume................................ Call uvc_resume................................ Call uvc_resume................................ Call uvc_resume................................ Call uvc_suspend................................ Call uvc_suspend................................ Call uvc_suspend................................ Call uvc_suspend................................ usb 2-1: USB disconnect, address 11 usb 2-1: new full speed USB device using uhci_hcd and address 12 usb 2-1: configuration #1 chosen from 1 choice Call uvc_resume................................ Call uvc_resume................................ Call uvc_resume................................ Call uvc_resume................................ Call uvc_suspend................................ Call uvc_suspend................................ Call uvc_suspend................................ Call uvc_suspend................................ New message is printed every couple of seconds as long as the USB device is connected. The actual device driver is not installed at this point so the problem seems to be in lower levels of the stack. The problem might be related to kernel shipped in Midinux OS since when running Ubuntu the USB device seems to be recognized correctly. Any ideas what could be wrong? -- Tero _______________________________________________ Moblin dev Mailing List [email protected] To manage or unsubscribe from this mailing list visit: https://lists.moblin.org/mailman/listinfo/dev or your user account on http://moblin.org once logged in. For more information on the Moblin Developer Mailing lists visit: http://moblin.org/community/mailing-lists
