Hi Pedro, Rajagopalan and Sanju, Once I inserted the kernel module, I'm able to run vif commands succesfully. Thanks for all your timely help. :)
Thanks, --Vignesh On Tue, Sep 15, 2015 at 12:35 AM, Sanju Abraham <[email protected]> wrote: > Vignesh, > > Can you please check if you inserted the vrouter kernel module that you > have successfully built. > > Follow the steps below: > 1-> copy the build vrouter.ko from > ~top-vrouter-build-dir/vrouter/vrouter.ko to /lib/modules/`uname > –r`/updates/dkms (create updates/dkms if missing). > 2-> depmod from /lib/modules/`uname –r` > 3-> modprobe vrouter > > Verify is vrouter kernel module is loaded. > > >> lsmod |grep vrouter > > Use vif once above step is successful > > Thanks > Sanju > > From: Rajagopalan Sivaramakrishnan <[email protected]> > Date: Monday, September 14, 2015 at 11:31 AM > To: Vigneshwaran R <[email protected]>, Pedro Marques < > [email protected]> > > Cc: "[email protected]" <[email protected]> > Subject: Re: [opencontrail-dev] Error in Contrail-vRouter-Agent Binary > > Hi Vignesh, > Did you step through the “vif” code to see what error you are hitting? > > Raja > > From: Vigneshwaran R <[email protected]> > Date: Monday, September 14, 2015 at 7:33 AM > To: Rajagopalan Sivaramakrishnan <[email protected]>, Pedro Marques < > [email protected]> > Cc: "[email protected]" <[email protected]> > Subject: Re: [opencontrail-dev] Error in Contrail-vRouter-Agent Binary > > Hi Rajagopalan/Pedro, > > We compiled vif binary for powerpc platform and tried to create vhost0 > interface using vif --create <i/f> <mac add> command, then when I execute > vif --list command it is giving the below error, > > *vif --list* > Error registering NetLink client: Success (0) > > How to resolve this error for creating vhost0 interface on my target board > which is powerpc. > > On Sat, Sep 12, 2015 at 11:33 AM, Vigneshwaran R < > [email protected]> wrote: > >> Okay Raja, Thanks >> >> On Fri, Sep 11, 2015 at 11:07 PM, Rajagopalan Sivaramakrishnan < >> [email protected]> wrote: >> >>> Hi Vignesh, >>> The vhost0 interface is created from startup scripts using the “vif” >>> utility. Please take a look at the "vif —create” and "vif —add” options. >>> >>> Raja >>> >>> From: Vigneshwaran R <[email protected]> >>> Date: Thursday, September 10, 2015 at 7:49 AM >>> To: "[email protected]" <[email protected]> >>> Subject: [opencontrail-dev] Error in Contrail-vRouter-Agent Binary >>> >>> Hi All, >>> >>> We have ported contrail-vrouter-agent binary to powerpc. I'm trying to >>> run contrail-vrouter-binary in powerpc board to make board act as compute >>> node for launching VM. >>> >>> I inserted the dataplane component (kernel loadable module), and when >>> running userspace component (contrail-vrouter-binary) it is giving issue.. >>> >>> *contrail-vrouter-agent * >>> >>> log4cplus:ERROR No appenders could be found for logger (SANDESH). >>> log4cplus:ERROR Please initialize the log4cplus system properly. >>> Error in config file </etc/contrail/contrail-vrouter-agent.conf>. Error >>> parsing vmware_mode from <> >>> Config file </etc/contrail/contrail-vrouter-agent.conf> parsing >>> completed. >>> >>> *vim contrail-vrouter-agent.log* >>> >>> 2015-09-10 Thu 23:15:47:962.834 UTC t4240rdb [Thread 4154224640, Pid >>> 30515]: Error reading interface <vhost0>. Error number 19 : No such device >>> >>> I Just cross compiled cross compiled both vrouter.ko and >>> contrail-vrouter-agent to powerpc and trying to run.. What should I do to >>> create this vhost0 interface in compute node ?? so that I can make use of >>> this board as an compute node ?? >>> >>> Kindly help me in this ... >>> >>> >>> Thanks, >>> --Vignesh >>> >> >> >
_______________________________________________ Dev mailing list [email protected] http://lists.opencontrail.org/mailman/listinfo/dev_lists.opencontrail.org
