I'm sorry, but I think you didn't understand. I just want Parabola to detect the GPIO pins, which is located in /dev/spidev* (virtually). GPIO pins are peripherals.
And the reason is that I want to flash Libreboot on a ThinkPad *with the BPi*, I do not want to flash Libreboot on the Pi (AFAIK no one has tried that). El 27/04/17 a las 20:14, Josh Branning escribió: > On 27/04/17 20:21, Megver83 wrote: >> Hi everyone, I want to flash libreboot with my Banana Pi M1, but I >> haven't found a way to enable the /dev/spidev* devices. I've tried >> enabling spidev and spi-sun4i modules, but nothing. In some forums, it >> tells me to edit the famous /boot/config.txt which is only available >> for the RPi. >> >> I've read http://linux-sunxi.org/SPIdev but I really do not know the >> difference between "y" and "m" in kernels (I know that "m" stands for >> "module"). If you can help me, I'd be very thankful. > > IIRC y stands for "yes", assuming support is in the kernel, and y is to > enable that support. I think you are correct that m is for "module". > > Have you tried UART connection? > > Before arch linux arm supported the A10 olinuxino-lime, I got u-boot and > a kernel compiled with an arch linux rootfs, to put on an sdcard [1]. I > also did the same for an A13 tablet (although it had/needed proprietary > wifi drivers). > > It was a long time ago, but I also had problems, so debugged using UART, > and can strongly recommend this for sunxi devices. > > That said, I did not use libreboot, I used u-boot instead. Somebody had > already ported u-boot to those boards, so not much work was needed. > > Sorry if I cannot be of any more help, I am by no means an expert, > > Nowadays, I just install the arch linux arm image, and follow the > migration guide, which doesn't help much for debugging, but seems to work. > > Josh > > > [1] > http://www.publicsite.org/J05HYYY/software_downloads/olinuxinolime-archlinux.tar.gz > > _______________________________________________ > Dev mailing list > [email protected] > https://lists.parabola.nu/mailman/listinfo/dev -- SIP: [email protected] XMPP: [email protected] Kontalk: +56 9 5630 2363 Tox: [email protected] GPG: 6DB9C4B4F0D8C0DC432CF6E4227CA7C556B2BA78 GNUSocial: @[email protected] Diaspora*: David P. (same XMPP ID) _______________________________________________ Dev mailing list [email protected] https://lists.parabola.nu/mailman/listinfo/dev
