I am upgrading the FreeBSD port. I just want to make sure which autoconf options I can include in the port Makefile, sepcifically with regard to eap. With our last run of the automated tests we got positive results on the following ikev2/eap-* tests:
rw-eap-aka-id-rsa rw-eap-aka-rsa rw-eap-md5-rsa rw-eap-mschapv2-id-rsa rw-eap-sim-rsa rw-eap-tls-fragments rw-eap-tls-only rw-eap-ttls-only rw-eap-ttls-phase2-piggyback Which autoconf options can I enable for these. I have identified the following autoconf options that I am reasonably sure of: --enable-eap-aka --enable-eap-md5 --enable-eap-mschapv2 --enable-eap-sim --enable-eap-tls --enable-eap-ttls =========================================================== Because of time limitations we do not have results for the following tests Radius related -------------------- mult-auth-rsa-eap-sim-id nat-rw-mixed rw-eap-md5-id-radius rw-eap-md5-radius rw-eap-sim-id-radius rw-eap-sim-only-radius rw-eap-sim-radius rw-eap-tls-radius rw-eap-tnc-11-radius rw-eap-tnc-11-radius-block rw-eap-ttls-radius TNC related ----------------- rw-eap-tnc-11 rw-eap-tnc-20 rw-eap-tnc-20-block rw-eap-tnc-20-tls rw-eap-tnc-dynamic Riaan _______________________________________________ Dev mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/dev
