Dear Xavier, Thank you for your valuable inputs. I do not have mesa_%.bbappend file in mesa. But i have created one and add the change that you have mentioned.
Best regards Anoop On Mon, Aug 18, 2014 at 6:47 PM, Xavier Roche <[email protected]> wrote: > Hi Anoop, > > I'm currently working on making an arm based yocto tizen image. > As you can read in Kevin's weekly report, there are still several things > to fix in order to build a suitable image. > I will create a specific qemuarm recipe you could then refer to for your > IMX6 target. I won't publish this recipe for the moment since major fixes > (related on RPM staff) are supposed to be pushed on meta-tizen ASAP.. > > In the mid-time I would recommend you to manually deactivate mesa gallium > driver in : > /recipes-graphics/mesa/mesa_%.bbappend : > > -GALLIUMDRIVERS_append = ",i915" > \ No newline at end of file > +#GALLIUMDRIVERS_append = ",i915" > > > Best regards, > > Xavier > > > > > On 11/08/2014 17:09, Anoop Babu wrote: > > Hi > > Building tizen using yocto > > Host OS and architecture - -Ubuntu SMP i686/ i386 GNU/Linux > Target architecture/BSP - iMX6 Sabre / meta-fsl-arm > The image you're trying to build - tizen-common-core-image-minimal-dev > > Build procedure followed is from > https://wiki.tizen.org/wiki/Build_Tizen_with_Yocto > but for imx6 > > Summary: 1 task failed: > /home/sfm/YOCTO/poky/meta/recipes-graphics/mesa/mesa_10.1.3.bb, > do_configure > Summary: There were 4 WARNING messages shown. > Summary: There were 2 ERROR messages shown, returning a non-zero exit code. > > Snippet. > > arm-poky-linux-gnueabi-libtool: install: warning: remember to run > `arm-poky-linux-gnueabi-libtool --finish /usr/lib' > > checking for EXPAT... > yes > configure: error: cannot enable egl_gallium without EGL > > /usr/bin/mkdir -p > '/home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/json-glib/1.0.0-r0/image/usr/bin' > > make[1]: Entering directory > '/home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/atk/2.12.0-r0/build/po' > > mkdir -p > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/atk/2.12.0-r0/image/usr/share; > \ > catalogs='af.gmo am.gmo an.gmo ar.gmo as.gmo ast.gmo az.gmo be.gmo > [email protected] bg.gmo bn.gmo bn_IN.gmo bs.gmo ca.gmo [email protected] cs.gmo > cy.gmo da.gmo de.gmo dz.gmo el.gmo en_CA.gmo en_GB.gmo [email protected] eo.gmo > es.gmo et.gmo eu.gmo fa.gmo fi.gmo fr.gmo ga.gmo gl.gmo gu.gmo he.gmo > hi.gmo hr.gmo hu.gmo hy.gmo id.gmo is.gmo it.gmo ja.gmo ka.gmo kk.gmo > km.gmo kn.gmo ko.gmo ku.gmo li.gmo lt.gmo lv.gmo mai.gmo mk.gmo ml.gmo > mn.gmo mr.gmo ms.gmo nb.gmo ne.gmo nl.gmo nn.gmo oc.gmo or.gmo pa.gmo > pl.gmo ps.gmo pt.gmo pt_BR.gmo ro.gmo ru.gmo rw.gmo si.gmo sk.gmo sl.gmo > sq.gmo sr.gmo [email protected] [email protected] sv.gmo ta.gmo te.gmo tg.gmo th.gmo > tk.gmo tr.gmo tt.gmo ug.gmo uk.gmo vi.gmo wa.gmo xh.gmo yi.gmo zh_CN.gmo > zh_HK.gmo zh_TW.gmo zu.gmo'; \ > for cat in $catalogs; do \ > cat=`basename $cat`; \ > case "$cat" in \ > *.gmo) destdir=/usr/share/locale;; \ > *) destdir=/usr/lib/locale;; \ > esac; \ > lang=`echo $cat | sed 's/\.gmo$//'`; \ > > dir=/home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/atk/2.12.0-r0/image$destdir/$lang/LC_MESSAGES; > \ > mkdir -p $dir; \ > if test -r $cat; then \ > /usr/bin/install -c -m 644 $cat $dir/atk10.mo; \ > echo "installing $cat as $dir/atk10.mo"; \ > else \ > /usr/bin/install -c -m 644 > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/atk/2.12.0-r0/atk-2.12.0/po/$cat > $dir/atk10.mo; \ > echo "installing > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/atk/2.12.0-r0/atk-2.12.0/po/$cat > as" \ > "$dir/atk10.mo"; \ > fi; \ > if test -r $cat.m; then \ > /usr/bin/install -c -m 644 $cat.m $dir/atk10.mo.m; \ > echo "installing $cat.m as $dir/atk10.mo.m"; \ > else \ > if test -r > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/atk/2.12.0-r0/atk-2.12.0/po/$cat.m > ; then \ > /usr/bin/install -c -m 644 > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/atk/2.12.0-r0/atk-2.12.0/po/$cat.m > \ > $dir/atk10.mo.m; \ > echo "installing > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/atk/2.12.0-r0/atk-2.12.0/po/$cat > as" \ > "$dir/atk10.mo.m"; \ > else \ > true; \ > fi; \ > fi; \ > done > > aclocal: warning: autoconf input should be named 'configure.ac', not ' > configure.in' > > ../arm-poky-linux-gnueabi-libtool --mode=install /usr/bin/install -c > json-glib-validate json-glib-format > '/home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/json-glib/1.0.0-r0/image/usr/bin' > > arm-poky-linux-gnueabi-libtool: install: warning: `libjson-glib-1.0.la' > has not been installed in `/usr/lib' > > autoreconf: running: libtoolize --copy --force > > installing > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/atk/2.12.0-r0/atk-2.12.0/po/af.gmo > as > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/atk/2.12.0-r0/image/usr/share/locale/af/LC_MESSAGES/atk10.mo > > arm-poky-linux-gnueabi-libtool: install: /usr/bin/install -c > .libs/json-glib-validate > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/json-glib/1.0.0-r0/image/usr/bin/json-glib-validate > > + '[' 1 '!=' 0 ']' > + echo 'Configure failed. The contents of all config.log files follows to > aid debugging' > Configure failed. The contents of all config.log files follows to aid > debugging > + find > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-mx6-poky-linux-gnueabi/mesa/2_10.1.3-r0/Mesa-10.1.3 > -name config.log -print -exec cat '{}' ';' > > + cd > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/libtirpc/0.2.4-r0/build > > + do_configure > > + cp -r > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/libtirpc/0.2.4-r0/libtirpc-0.2.4/../tirpc > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/libtirpc/0.2.4-r0/libtirpc-0.2.4 > > arm-poky-linux-gnueabi-libtool: install: warning: `libjson-glib-1.0.la' > has not been installed in `/usr/lib' > > + bbfatal 'oe_runconf failed' > + echo 'ERROR: oe_runconf failed' > ERROR: oe_runconf failed > + exit 1 > + bb_exit_handler > + ret=1 > + case $ret in > + case $BASH_VERSION in > + echo 'WARNING: > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-mx6-poky-linux-gnueabi/mesa/2_10.1.3-r0/temp/run.do_configure.24439:1 > exit 1 from > exit' 1 > WARNING: > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-mx6-poky-linux-gnueabi/mesa/2_10.1.3-r0/temp/run.do_configure.24439:1 > exit 1 from > exit 1 > + exit 1 > > ERROR: Function failed: do_configure (log file is located at > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-mx6-poky-linux-gnueabi/mesa/2_10.1.3-r0/temp/log.do_configure.24439) > arm-poky-linux-gnueabi-libtool: install: /usr/bin/install -c > .libs/json-glib-format > /home/sfm/YOCTO/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/json-glib/1.0.0-r0/image/usr/bin/json-glib-format > > Attached is the log files > Request inputs to resolve the error > > Best regards > Anoop > > > _______________________________________________ > Dev mailing [email protected]https://lists.tizen.org/listinfo/dev > > >
_______________________________________________ Dev mailing list [email protected] https://lists.tizen.org/listinfo/dev
