Hello Geoffroy,
I tried commenting out the lines you mentioned, but I'm still getting the same
error.
I'm currently looking at the link you sent, trying to do it with 'releases'
instead of 'snapshot', but when I try to run:
nohup gbs build -A i586 --threads=4 --baselibs >build.log 2>&1 &
I just get a process number, and then nothing. It looks like the process dies.
I'm going to go through that HowTo again, but this time use snapshot, so it
might take some time before I can post any results.
Regards
________________________________
From: VanCutsem, Geoffroy [[email protected]]
Sent: 30 October 2014 12:41 PM
To: Michael Johnson; [email protected]
Subject: RE: Error: No source package found at <Tizen_Project>
Hi Michael,
I’ve not tried the procedure you’re using in a while but I’ve noticed that
there are a couple of projects that are no longer used in IVI but are still
part of the manifest file used by your method (I guess you’re trying the IVI
profile, aren’t you?). What you could try to do to see if it makes any
difference is to comment them out (or completely remove them). Here are the
following lines from <Tizen_Project>/.repo/manifests/ivi/projects.xml to be
removed:
- <project name="platform/adaptation/emulator/emulator-yagl"
path="platform/adaptation/emulator/emulator-yagl" groups="ivi"/>
- <project name="platform/kernel/u-boot" path="platform/kernel/u-boot"
groups="ivi"/>
Thanks,
Geoffroy
-----------------------------------------------
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
From: Michael Johnson [mailto:[email protected]]
Sent: Thursday, October 30, 2014 1:05 PM
To: VanCutsem, Geoffroy; [email protected]
Subject: RE: Error: No source package found at <Tizen_Project>
Hi Geoffroy,
Thanks for the link, I'll give it a try, and yes, I did run 'gbs build' from
inside that root folder.
I'll let you know how it goes.
Cheers!
________________________________
From: VanCutsem, Geoffroy [[email protected]]
Sent: 30 October 2014 11:54 AM
To: Michael Johnson; [email protected]<mailto:[email protected]>
Subject: RE: Error: No source package found at <Tizen_Project>
Hi Michael,
The following page may be helpful (it’s a bit more up-to-date):
https://source.tizen.org/documentation/developer-guide/all-one-instructions/creating-tizen-ivi-images-based-on-specific-snapshot-one-page
Just a sanity check though on what you did: did you issue the ‘gbs build’
command from *inside* the <Tizen_Project> folder (that’s what you should do)?
Geoffroy
-----------------------------------------------
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
From: Dev [mailto:[email protected]] On Behalf Of Michael Johnson
Sent: Thursday, October 30, 2014 12:41 PM
To: [email protected]<mailto:[email protected]>
Subject: [Dev] FW: Error: No source package found at <Tizen_Project>
Hi all,
I'm having problems trying to build the Tizen source. Cloning the source went
fine, but I'm now going through
https://source.tizen.org/documentation/developer-guide/getting-started-guide/building-packages-locally-gbs,
and getting the above error when using the command:
gbs -d build -A i586 --threads=4 --clean-once
--exclude=gcc,cmake,filesystem,aul,libmm-sound,libtool
I'm using the .gbs.conf below that exists after cloning the source.
[general]
tmpdir=/var/tmp/
profile = profile.tizen3.0_ivi
work_dir=.
fallback_to_native=true
[repo.tizen3.0_x86]
url=${work_dir}/pre-built/toolchain-x86/
[repo.tizen3.0_x86_64]
url=${work_dir}/pre-built/toolchain-x86_64/
[profile.tizen3.0_ivi]
repos=repo.tizen3.0_x86,repo.tizen3.0_x86_64
buildconf=${work_dir}/scm/meta/build-config/build.conf
exclude_packages=libtool,gettext
Bug DEVT-148 says "gbs build fails with an error if packaging/ is a symlink",
and it says that it is fixed, so I'm wondering if there is anyone having this
issue, or is there a different way of building the source that is not mentioned
in the documentation?
Any guidance is appreciated.
Thanks
Mike
MICHAEL JOHNSON
Embedded Software Engineer
Symphony Teleca
Sunley House, 46 Jewry Street, Winchester, Hampshire, SO23 8RY
Phone: +441962868866, Fax: +441962868867
[email protected]<mailto:[email protected]>
www.symphonyteleca.com<http://www.symphonyteleca.com>
Teleca Limited, a company registered in England & Wales, registration number
2773878, registered office at Sunley House, 46 Jewry Street, Winchester,
Hampshire SO23 8RY. VAT registration number GB 674 6583 90
Follow what's going on at Symphony Teleca's blog on
www.symphonyteleca.com/blog<http://www.symphonyteleca.com/blog>. Please
consider the environment before you print.
Notice to recipient: This e-mail (including any attachments) is meant for the
intended recipient only, may contain confidential and proprietary information,
and is protected by law. If you received this e-mail in error, please
immediately notify the sender of the error by return e-mail, delete this
communication and any attachments, and shred any printouts. Unauthorized
review, use, dissemination, distribution, copying or taking of any action based
on this communication is strictly prohibited.
_______________________________________________
Dev mailing list
[email protected]
https://lists.tizen.org/listinfo/dev
