Hi Baptiste, All,
I pushed a fix that contains an update of recipe capi-base-common and a
minor improvement of capi-network-tethering. Now capi-base-common
provides definitions of TIZEN_ERROR_TETHERING and
TIZEN_ERROR_NOT_SUPPORTED in include/tizen_error.h and I no longer
experience the error from my previous log during building
capi-network-tethering.
Please visit the following link to review my changes. I hope that they
will be approved and merged with the upstream of "Tizen on Yocto":
https://review.tizen.org/gerrit/39798
I will continue my work on the other issues that I have reported.
Thanks,
Leon
On 22.05.2015 13:23, Leon Anavi wrote:
Hi again Baptiste,
On 22.05.2015 09:07, Baptiste Durand wrote:
Hi Leon,
some week ago I had a discussion with Daren Hart from Intel that said
to me for Intel Architecture the machine to use is***intel-corei7-64
*for NUC and Minnowboard max..
I have never seen this error.
My investigation about the errors from the log file of recipe
capi-network-tethering shows that the undeclared constants
TIZEN_ERROR_TETHERING and TIZEN_ERROR_NOT_SUPPORTED are defined at
include/tizen_error.h from project platform/core/api/common.
An update of recipe capi-base-common to the latest version of the
source code from the git repo is required to solve these errors. I
have reported the problem and I will try to fix it:
https://bugs.tizen.org/jira/browse/BTY-107
Best regards,
Leon
Did you add meta-tizen project into bblayer.conf and did you use
tizen distro also?
I build tizen-common-core-image-crosswalk-dev.
But as I know tizen-common-core-image-crosswalk-dev is a derived from
tizen-common-core-image-crosswalk.
So It should work. Maybe there is dependence that not be installed in
your sysroot in your case but not in mine.
I will take a look after fixing my grub issue...
Baptiste
2015-05-21 16:41 GMT+02:00 Leon Anavi <[email protected]
<mailto:[email protected]>>:
Hi Baptiste,
On 21.05.2015 12:40, Baptiste Durand wrote:
Hi Leon,
There was problems related to post instllation in yocto, this
lead to image runtime breaks.
At this time I'm facing to an GRUB issue due to a bug to
bootimg.class.
Indeed USB image is done with 1 fat partition ony .
In the case of tizen due to image size , the partition is
bigger than 512 Mo that leads to build faillure.
There is a sync of recipes to Q1 2015 in the branch
"sandbox/durandba1/devel-common" for meta-tizen project and
tizen-distro project.
If you use ext3 image directly, the runtime should work, I
tested in on lenovo without any problem
Thank you for the feedback.
I am getting an error with recipe for capi-network-tethering
while I am building tizen-common-core-image-crosswalk for machine
genericx86-64 (the host is Debian 8). I am using the recipes from
sandbox/durandba1/devel-common. Here is the build log:
https://gist.github.com/leon-anavi/abcf643a794f5168f16a
Do you have the same errors?
Are you also building tizen-common-core-image-crosswalk?
Thanks,
Leon
BR
Baptiste
2015-05-20 19:52 GMT+02:00 Leon Anavi <[email protected]
<mailto:[email protected]>>:
Hi,
My research about the issue with pkgcmd on Tizen:Common
image built for Yocto shows that most probably it is caused
by SMACK. This is an output for the serial debug console
when I try to install a wgt (logged as user bob):
pkgcmd -i -t wgt -p helloTizen.wgt -q
path is /home/bob/helloTizen.wgt
[ 502.766245] audit: type=1400 audit(502.765:229):
lsm=SMACK fn=smack_inode_permission action=denied
subject="System" object="_" requested=wx pid=704
comm="pkgcmd" name="dbspace" dev="mmcblk0p2" ino=8878
[ 502.890534] audit: type=1400 audit(502.889:230):
lsm=SMACK fn=smack_inode_permission action=denied
subject="System" object="_" requested=wx pid=708 comm="wgt"
name="bob" dev="mmcblk0p2" ino=8875
__return_cb req_id[1] pkg_type[wgt]
pkgid[/home/bob/helloTizen.wgt] key[end] val[fail]
processing result : FATAL_ERROR [61] failed
spend time for pkgcmd is [162]ms
SMACK options are enabled and the kernel configuration. It
exists as an entry at /proc/filesystems:
grep smackfs /proc/filesystems
nodev smackfs
I also noticed that pkgcmd recipe in “Tizen on Yocto” is
outdated. According to the git log on 1 April
security-server was replaced by cynara in slp-pkgmgr but the
Yocto recipe still uses commit
5a9c95d025580510a18f80694f807dfdd569410f from 26 January.
I guess the main issue related to the installation of wgt
files is caused due to the wrong SMACK configuration at
Yocto layers. I have reported the issue at JIRA:
https://bugs.tizen.org/jira/browse/BTY-106
Any suggestions how to fix this issue is welcome and it will
be highly appreciated :)
Thanks,
Leon
On 18.05.2015 13:18, Leon Anavi wrote:
Hi Baptiste,
On 14.05.2015 15:40, Baptiste Durand wrote:
Hi Leon,
I will deliver next week some important changes in Tizen
Yocto including synchronisation on Q1 2015 and Live USB
fixing
I will test your app with this new version of tizen yocto
and I will keep you in touch
Thank you for your feedback. I explored the source code of
pkgmgr which provides pkcmd but I was unable to locate the
issue that prevents me from installing wgt apps on
Tizen:Common built with Yocto.
Do you have any progress?
Is the cause of this bug the same as in TC-1705? If not I
can report it as a separate bug that affects Tizen on Yocto.
Thanks,
Leon
Have a good week-end
/Please note : today is a day off in France (Ascension Day)
For Eurogiciel company , tomorrow is also a day off, so in
consequence please don't expect answer before next week./
/Sorry for inconvenience./
/
/
BR
Baptiste
2015-05-14 11:37 GMT+02:00 Leon Anavi
<[email protected] <mailto:[email protected]>>:
Hi Art, Baptiste, All,
Art, thank for sharing your experience. I have created
a troubleshooting section at the existing wiki article
and I added your notes there:
https://wiki.tizen.org/wiki/Installing_Web_Applications_on_Tizen:Common_and_Tizen_IVI#Troubleshooting
Art, I tried both of your recommendations but
unfortunately in my case the installation of the wgt
file fails due to another reason. I shared the source
code of the sample web app that I use at GitHub:
https://github.com/leon-anavi/helloTizen
I tested the wgt file on Intel NUC with Tizen:Common
image built with GBS from yesterday and it works fine.
The same app still fails to install with pkgcmd on
Tizen:Common built using Yocto on MinnowBoard MAX. I
guess the issue is caused my the version of the pkgcmd
in the Yocto recipes.
Baptiste, could you please share details which
versions of pkgcmd and Crosswalk should I use in the
Yocto recipes to fix this?
Best regards,
Leon
On 13.05.2015 20:33, McGee, Art wrote:
Leon,
I've run into this problem in one of two ways.
1. The package your installing is using the same id
as another package and they conflict. You should
uninstall the other first using the pkgcmd -u -n <id> -q
2. The other is the icon reference in your
config.xml doesn't map to an image file.
Art
On 13 May 2015 at 09:53, Leon Anavi
<[email protected]
<mailto:[email protected]>> wrote:
Hi Baptiste, All,
I am unable to install wgt file with pkgcmd on
MinnowBoard MAX with Tizen:Common built using
Yocto due to the following error:
path is /home/bob/basic.wgt
__return_cb req_id[1] pkg_type[wgt]
pkgid[/home/bob/basic.wgt] key[end] val[fail]
processing result : FATAL_ERROR [61] failed
spend time for pkgcmd is [712]ms
I am using pkgcmd as described at the wiki:
https://wiki.tizen.org/wiki/Installing_Web_Applications_on_Tizen:Common_and_Tizen_IVI
Tizen:Common has been built using Yocto rev_0.9
(image type tizen-common-core-image-crosswalk
with crosswalk version 11.39.256.0) as described
at the following wiki articles:
https://wiki.tizen.org/wiki/Build_Tizen_with_Yocto
https://wiki.tizen.org/wiki/MinnowMax
The issue seems similar to the following reports
at Tizen and Crosswalk bug trackers:
https://crosswalk-project.org/jira/browse/XWALK-2616
https://bugs.tizen.org/jira/browse/TC-1705
Could you please provide me guidelines how to
solve this issue?
Thanks,
Leon
--
Leon Anavi
Software Engineer
Mob : +359 88 527 7901 <tel:%2B359%2088%20527%207901>
konsulko.com <http://konsulko.com>
_______________________________________________
Dev mailing list
[email protected] <mailto:[email protected]>
https://lists.tizen.org/listinfo/dev
--
*Art McGee*
Infotainment Engineer
Jaguar Land Rover North America, LLC
1419 NW 14th Ave, Portland, Oregon, 97209
Jaguar.com <http://jaguar.com> | LandRover.com
<http://landrover.com>
--
Leon Anavi
Software Engineer
Mob :+359 88 527 7901 <tel:%2B359%2088%20527%207901>
konsulko.com <http://konsulko.com>
--
Baptiste DURAND
Eurogiciel Vannes/FR
--
Leon Anavi
Software Engineer
Mob :+359 88 527 7901 <tel:%2B359%2088%20527%207901>
konsulko.com <http://konsulko.com>
--
Leon Anavi
Software Engineer
Mob :+359 88 527 7901 <tel:%2B359%2088%20527%207901>
konsulko.com <http://konsulko.com>
--
Baptiste DURAND
Eurogiciel Vannes/FR
--
Leon Anavi
Software Engineer
Mob :+359 88 527 7901 <tel:%2B359%2088%20527%207901>
konsulko.com <http://konsulko.com>
--
Baptiste DURAND
Eurogiciel Vannes/FR
--
Leon Anavi
Software Engineer
Mob : +359 88 527 7901
konsulko.com
--
Leon Anavi
Software Engineer
Mob : +359 88 527 7901
konsulko.com
_______________________________________________
Dev mailing list
[email protected]
https://lists.tizen.org/listinfo/dev
