Hi Art,
On 17.06.2015 18:20, McGee, Art wrote:
I'll have to take a closer look at the code. The crosswalk rpm didn't
work on ivi.
Earlier today I updated the screen orientation to landscape of the
following basic app that I use for testing:
https://github.com/leon-anavi/helloTizen
My quick tests show that this app is successfully installed and launched
on the following hardware:
* Intel NUC with Tizen Common: tizen-common_20150513.1 x86_64 default
* HummingBoard (Freescale i.MX6 ARM SoC) with Tizen:Common built using
Yocto and Crosswalk 11.40.277.0
I hope that this simple app might be useful for debugging of your case.
As Jose suggested you should run journalctl -f on the behalf of the root
user before launching the app to see if any errors are reported.
Best regards,
Leon
*Art McGee*
Infotainment Engineer
Jaguar Land Rover North America, LLC
1419 NW 14th Ave, Portland, Oregon, 97209
Jaguar.com <http://jaguar.com> | LandRover.com <http://landrover.com>
On 17 June 2015 at 08:05, McGee, Art <[email protected]
<mailto:[email protected]>> wrote:
Leon,
Yes, This is the crosswalk apps running in landscape
orientation. I should then use the crosswalk from common. I
currently use tizen_ivi_3.0
Thanks,
Art.
*Art McGee*
Infotainment Engineer
Jaguar Land Rover North America, LLC
1419 NW 14th Ave, Portland, Oregon, 97209
Jaguar.com <http://jaguar.com> | LandRover.com <http://landrover.com>
On 17 June 2015 at 03:16, Leon Anavi <[email protected]
<mailto:[email protected]>> wrote:
Hi Art,
If you remember several weeks ago I had some issues with
installing and running HTML5 apps on Tizen:Common which were
solved after updating Crosswalk to version 11.40.277.0. Which
version of Crosswalk are you using?
Is the screen orientation set to landscape at the config.xml
of the HTML5 applications?
Best regards,
Leon
On 17.06.2015 01:55, McGee, Art wrote:
I have run into a problem that Tizen web apps will not run
when the box has been setup in landscape mode. I have been
able to launch the same apps in portrate mode. I have been
spending quite a bit of time searching. I would input on
the app_launch process when it comes to xwalk wigits. I have
been able to see that a xwalk 'renderer' process doesn't get
started and the app will shutdown after never getting a
display. and it timesout on the debus call. Any information
on how the launch process works will help me discover where
the bug is accually.
*Art McGee*
Infotainment Engineer
Jaguar Land Rover North America, LLC
1419 NW 14th Ave, Portland, Oregon, 97209
Jaguar.com <http://jaguar.com> | LandRover.com
<http://landrover.com>
_______________________________________________
Crosswalk-dev mailing list
[email protected]
<mailto:[email protected]>
https://lists.crosswalk-project.org/mailman/listinfo/crosswalk-dev
--
Leon Anavi
Software Engineer
Mob : +359 88 527 7901
konsulko.com <http://konsulko.com>
--
Leon Anavi
Software Engineer
Mob : +359 88 527 7901
konsulko.com
_______________________________________________
Dev mailing list
[email protected]
https://lists.tizen.org/listinfo/dev
