Hi Ray,
On 19.10.2015 06:29, RayBloodworth wrote:
Hi, Leon
>Honestly I am not sure what is the current status of tizen-ivi
branch. Nowadays my work is focused on >Tizen:Common, the tizen
branch. In my opinion instead of branches, the additional packages
needed for IVI (or >other Tizen 3 profiles) should be provided by a
separate meta layer. Anyway, this is another story :)
tizen-ivi branch was final released at 2015/02/05. It's the last release.
>Based on my experience you should apply i.MX6 specific patches in
Weston 1.6 and after that you should >launch Weston with fbdev-backend.
These patches have been applied and weston is launched with
fbdev-backend automaticly.
> You might be also experiencing incompatibility between the driver
version for Vivante GPU in the kernel and >the firmware blobs in the
user space. Which kernel version are you using? Is it 3.14?
>Btw I see that weekeyboard is not available. You should either built
it or just replace it with weston-keyboard >in weston configuration file.
I have upgraded GPU libs and kernel both to
3.14.28(freescale) version. Weston can be launched successful manually.
OK, very good. If Weston is working when it is launched manually then it
should be also working when it is launched by a systemd service.
I think the problem is about tlm/multi-seat with weston using
fbdev-backend.
Even though single seat mode enabled, there still are two seats, one
is called genivi(UID:116), the other is app(UID:5000). And two westons
be launched, the major is genivi weston, which using drm-backend. the
app weston use wayland-backend and process buffer through genivi weston.
In older versions, all apps were running with app user. So I want to
launch the app weston in user session of 5000.
First I changed the seat number from 2 to 1 in tlm-singleseat.conf,
then changed the weston-user.ini to"shell=desktop-shell.so" and
changed the app seat to [seat0].
After booting, weston can be launched successfully, but
weston-terminal can not be launched when I click the icon...
Is weston-terminal included in the image? Do you have any error logs at
journalctl?
I checked the codes of weston, it seems like there is no multi-seat
support with fbdev-backend. Even if we modify the configs by force,
there should be problems with some functions.
So, I think the root of this problem is fbdev-backend does not support
multi-seat. I'm trying to use system with genivi user only.
If this is the case then this seems as a specific issue with Wayland and
Weston. I suggest you to have a look at newer versions of Weston and
eventually to seek help through Wayland mailing list.
Best regards,
Leon
BR,
Ray
------------------------------------------------------------------------
Subject: Re: IVI System Black screen after boot up with weston
To: [email protected]; [email protected]; [email protected]
From: [email protected]
Date: Sat, 17 Oct 2015 11:55:29 +0300
Hi Ray,
On 16.10.2015 09:00, RayBloodworth wrote:
Hi, Leon, everyone
I have built Tizen-IVI image(tizen-ivi-image-dev) with single
seat using yocto and run it on MCIMX6Q-SDP:
tizen-distro : tizen-ivi branch
meta-fsl-arm/meta-fsl-arm-extra: dizzy (kernel is upgraded to
3.14.28, imx-gpu-viv is upgraded to 5.0.11)
Honestly I am not sure what is the current status of tizen-ivi branch.
Nowadays my work is focused on Tizen:Common, the tizen branch. In my
opinion instead of branches, the additional packages needed for IVI
(or other Tizen 3 profiles) should be provided by a separate meta
layer. Anyway, this is another story :)
Then I configed boot params to lvds video(default is hdmi) output.
After booting the system, tty1 turn to black screen.
According to multi-user case, there should be a weston(A)
running with genivi user and another one(B) with app user. A
should use fbdev-backend and B should use wayland-backend.
Using pstree I got this:
root@imx6qsabresd:~# pstree
systemd-+-ambd---{gdbus}
|-amd
|-avahi-daemon---avahi-daemon
|-bluetoothd
|-connmand
|-dbus-daemon
|-ofonod
|-sshd---sh---pstree
|-system_server
|-systemd-journal
|-systemd-logind
|-systemd-udevd---systemd-udevd
|-tlm-+-tlm-sessiond-+-genivi-session----weston-launch---weston---{weston}
| | |-{gdbus}
| | `-{gmain}
| |-tlm-sessiond-+-user-session---weston-+-weston-desktop-
| | | `-{weston}
| | |-{gdbus}
| | `-{gmain}
| |-{gdbus}
| `-{gmain}
`-wpa_supplicant
It's looks like OK.
And I checked the genivi-weston log:
Date: 1970-01-01 UTC
[00:06:14.141] weston 1.6.0
http://wayland.freedesktop.org/
Bug reports to:
https://bugs.freedesktop.org/enter_bug.cgi?product=Wayland&component=weston&version=1.6.0
Build: tizen_3.0_ivi_release-dirty Fixed weston
transfromation problem (2015-01-08 18:51:08 +0200)
[00:06:14.142] OS: Linux, 3.14.28-1.0.0_ga+g91cf351, #1 SMP
PREEMPT Sun Oct 11 02:05:20 CST 2015, armv7l
[00:06:14.147] Using config file '/etc/xdg/weston/weston-genivi.ini'
[00:06:14.150] Loading module '/usr/lib/weston/fbdev-backend.so'
[00:06:14.267] initializing fbdev backend
[00:06:14.281] compositor->use_gal2d=0
[00:06:14.289] Loading module '/usr/lib/weston/gl-renderer.so'
[00:06:14.356] Creating fbdev output. /dev/fb0 x=0 y=0
[00:06:14.356] Opening fbdev frame buffer.
[00:06:14.356] Calculating pixman format from:
- type: 0 (aux: 0)
- visual: 2
- bpp: 16 (grayscale: 0)
- red: offset: 11, length: 5, MSB: 0
- green: offset: 5, length: 6, MSB: 0
- blue: offset: 0, length: 5, MSB: 0
- transp: offset: 0, length: 0, MSB: 0
[00:06:14.425] EGL version: 1.4
[00:06:14.425] EGL vendor: Vivante Corporation
[00:06:14.425] EGL client APIs: OpenGL_ES OpenVG
[00:06:14.425] EGL extensions: EGL_KHR_reusable_sync
EGL_KHR_fence_sync
EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap
EGL_KHR_gl_texture_2D_image
EGL_KHR_gl_texture_cubemap_image
EGL_KHR_gl_renderbuffer_image EGL_KHR_lock_surface
EGL_KHR_create_context
EGL_EXT_create_context_robustness
EGL_EXT_buffer_age EGL_EXT_protected_surface
EGL_WL_bind_wayland_display
[00:06:14.425] GL version: OpenGL ES 3.0 V5.0.11.p4.25762
[00:06:14.425] GLSL version: OpenGL ES GLSL ES 3.00
[00:06:14.425] GL vendor: Vivante Corporation
[00:06:14.425] GL renderer: Vivante GC2000
[00:06:14.425] GL extensions: GL_OES_vertex_type_10_10_10_2
GL_OES_vertex_half_float GL_OES_element_index_uint
GL_OES_mapbuffer GL_OES_vertex_array_object
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_compressed_paletted_texture GL_OES_texture_npot
GL_OES_rgb8_rgba8 GL_OES_depth_texture
GL_OES_depth_texture_cube_map GL_OES_depth24
GL_OES_depth32
GL_OES_packed_depth_stencil GL_OES_fbo_render_mipmap
GL_OES_get_program_binary
GL_OES_fragment_precision_high
GL_OES_standard_derivatives GL_OES_EGL_image
GL_OES_EGL_sync
GL_EXT_texture_type_2_10_10_10_REV
GL_EXT_texture_filter_anisotropic
GL_EXT_texture_format_BGRA8888 GL_EXT_read_format_bgra
GL_EXT_multi_draw_arrays GL_EXT_frag_depth
GL_EXT_discard_framebuffer GL_EXT_blend_minmax
GL_EXT_multisampled_render_to_texture GL_EXT_robustness
GL_VIV_tex_direct
[00:06:14.426] GL ES 2 renderer features:
read-back format: BGRA
wl_shm sub-image to texture: no
EGL Wayland extension: yes
[00:06:14.426] Chosen EGL config details:
RGBA bits: 8 8 8 0
swap interval range: 0 - 10
[00:06:14.426] fbdev output 1024×768 px
guessing 63 Hz and 96 dpi
[00:06:14.428] input device 'gpio-keys.21', /dev/input/event7 is a
keyboard
[00:06:14.429] input device 'DELL Dell USB Entry Keyboard',
/dev/input/event5 is a keyboard
[00:06:14.430] not using input device '/dev/input/event6'.
[00:06:14.431] input device 'max11801_ts', /dev/input/event1 is a
touch device
[00:06:14.432] input device 'EETI eGalax Touch Screen',
/dev/input/event0 is a touch device
[00:06:14.433] not using input device '/dev/input/event2'.
[00:06:14.433] not using input device '/dev/input/event3'.
[00:06:14.434] not using input device '/dev/input/event4'.
[00:06:14.434] launching '/usr/libexec/weston-keyboard'
[00:06:14.438] seat created with name default
[00:06:14.531] Compositor capabilities:
arbitrary surface rotation: yes
screen capture uses y-flip: yes
[00:06:14.534] Loading module '/usr/lib/weston/fullscreen-shell.so'
[00:06:14.707] input_method died, respawning...
[00:06:14.707] launching '/usr/libexec/weston-keyboard'
[00:06:14.792] input_method died, respawning...
[00:06:14.792] launching '/usr/libexec/weston-keyboard'
[00:06:14.868] input_method died, respawning...
[00:06:14.868] launching '/usr/libexec/weston-keyboard'
[00:06:14.938] input_method died, respawning...
[00:06:14.938] launching '/usr/libexec/weston-keyboard'
[00:06:15.006] input_method died, respawning...
[00:06:15.006] launching '/usr/libexec/weston-keyboard'
[00:06:15.074] input_method died, giving up.
weston(PID:5000) log:
[00:01:23.662] weston 1.6.0
http://wayland.freedesktop.org/
Bug reports to:
https://bugs.freedesktop.org/enter_bug.cgi?product=Wayland&component=weston&version=1.6.0
Build: tizen_3.0_ivi_release-dirty Fixed weston
transfromation problem (2015-01-08 18:51:08 +0200)
[00:01:23.663] OS: Linux, 3.14.28-1.0.0_ga+g91cf351, #1 SMP
PREEMPT Sun Oct 11 02:05:20 CST 2015, armv7l
[00:01:23.663] Using config file '/etc/xdg/weston/weston-user.ini'
[00:01:23.663] Loading module '/usr/lib/weston/wayland-backend.so'
[00:01:23.676] Multiseat enabled 0
[00:01:23.683] create input with id 10
[00:01:23.684] initialise input with seat name (null)
[00:01:23.684] launching '/bin/weekeyboard'
[00:01:23.685] compositor: executing '/bin/weekeyboard' failed: No
such file or directory
[00:01:23.685] Loading module '/usr/lib/weston/gl-renderer.so'
[00:01:23.715] input_handle_capabilities input with seatname and
caps 7
[00:01:23.743] Creating 1024x768 wayland output at (0, 0)
[00:01:23.759] EGL version: 1.4
[00:01:23.759] EGL vendor: Vivante Corporation
[00:01:23.759] EGL client APIs: OpenGL_ES OpenVG
[00:01:23.759] EGL extensions: EGL_KHR_reusable_sync
EGL_KHR_fence_sync
EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap
EGL_KHR_gl_texture_2D_image
EGL_KHR_gl_texture_cubemap_image
EGL_KHR_gl_renderbuffer_image EGL_KHR_lock_surface
EGL_KHR_create_context
EGL_EXT_create_context_robustness
EGL_EXT_buffer_age EGL_EXT_protected_surface
EGL_WL_bind_wayland_display
[00:01:23.760] GL version: OpenGL ES 3.0 V5.0.11.p4.25762
[00:01:23.760] GLSL version: OpenGL ES GLSL ES 3.00
[00:01:23.760] GL vendor: Vivante Corporation
[00:01:23.760] GL renderer: Vivante GC2000
[00:01:23.760] GL extensions: GL_OES_vertex_type_10_10_10_2
GL_OES_vertex_half_float GL_OES_element_index_uint
GL_OES_mapbuffer GL_OES_vertex_array_object
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_compressed_paletted_texture GL_OES_texture_npot
GL_OES_rgb8_rgba8 GL_OES_depth_texture
GL_OES_depth_texture_cube_map GL_OES_depth24
GL_OES_depth32
GL_OES_packed_depth_stencil GL_OES_fbo_render_mipmap
GL_OES_get_program_binary
GL_OES_fragment_precision_high
GL_OES_standard_derivatives GL_OES_EGL_image
GL_OES_EGL_sync
GL_EXT_texture_type_2_10_10_10_REV
GL_EXT_texture_filter_anisotropic
GL_EXT_texture_format_BGRA8888 GL_EXT_read_format_bgra
GL_EXT_multi_draw_arrays GL_EXT_frag_depth
GL_EXT_discard_framebuffer GL_EXT_blend_minmax
GL_EXT_multisampled_render_to_texture GL_EXT_robustness
GL_VIV_tex_direct
[00:01:23.760] GL ES 2 renderer features:
read-back format: BGRA
wl_shm sub-image to texture: no
EGL Wayland extension: yes
[00:01:23.760] Chosen EGL config details:
RGBA bits: 8 8 8 8
swap interval range: 0 - 10
[00:01:23.760] Compositor capabilities:
arbitrary surface rotation: yes
screen capture uses y-flip: yes
[00:01:23.770] Loading module '/usr/lib/weston/desktop-shell.so'
[00:01:23.784] launching '/usr/libexec/weston-desktop-shell'
[00:01:23.789] input_method died, respawning...
[00:01:23.789] launching '/bin/weekeyboard'
[00:01:23.796] compositor: executing '/bin/weekeyboard' failed: No
such file or directory
[00:01:23.799] input_method died, respawning...
[00:01:23.799] launching '/bin/weekeyboard'
[00:01:23.815] compositor: executing '/bin/weekeyboard' failed: No
such file or directory
[00:01:23.818] input_method died, respawning...
[00:01:23.819] launching '/bin/weekeyboard'
[00:01:23.823] compositor: executing '/bin/weekeyboard' failed: No
such file or directory
[00:01:23.827] input_method died, respawning...
[00:01:23.827] launching '/bin/weekeyboard'
[00:01:23.831] compositor: executing '/bin/weekeyboard' failed: No
such file or directory
[00:01:23.834] input_method died, respawning...
[00:01:23.834] launching '/bin/weekeyboard'
[00:01:23.838] compositor: executing '/bin/weekeyboard' failed: No
such file or directory
[00:01:23.841] input_method died, giving up.
I couldn't find any error. Could anyone give me any advices?
Based on my experience you should apply i.MX6 specific patches in
Weston 1.6 and after that you should launch Weston with fbdev-backend.
You might be also experiencing incompatibility between the driver
version for Vivante GPU in the kernel and the firmware blobs in the
user space. Which kernel version are you using? Is it 3.14?
Btw I see that weekeyboard is not available. You should either built
it or just replace it with weston-keyboard in weston configuration file.
Best regards,
Leon
Thanks !
BR,
Ray
--
Leon Anavi
Software Engineer
konsulko.com
--
Leon Anavi
Software Engineer
konsulko.com
_______________________________________________
Dev mailing list
[email protected]
https://lists.tizen.org/listinfo/dev
