Title: Samsung Enterprise Portal mySingle

Hello

 

Sorry for your incovenience.

In fact, we are ready to provide plug-in for ARTIK-10 Mali(T628).

But, ARM licenses prohibits distribution of binaries strictly.

Please understand this situation...

it will take some time to handle all issue related to ARM license.

I will let you know the result as soon as i have.

 

====================================================

SangBae Lee [이상배] sangbae90....@samsung.com 

Software Platform Team / Platform Soluton Lab,

Software Center, Samsung Electronics Co., Ltd.

☎) office +82-2-6147-7237, mobile +82-10-4195-0291

==================================================== 

 

 

--------- Original Message ---------

Sender : Raju Bitter <rajubit...@gmail.com>

Date : 2016-06-15 18:57 (GMT+9)

Title : Re: [Dev] GPU-Mali HW acceleration for Tizen-3.0 on Artik10 board?

 

When I used Tizen 3.0 TV profile with the Odroid XU3 & XU4, I was able to download the DDK from here:
https://source.tizen.org/mali-ddk-tizen-3.0-wayland-enabled

The DDK has been available online since June 2015, I believe. Not sure if there is an updated version for Artik.

- Raju

On Tue, Jun 14, 2016 at 9:55 AM, Philippe Coval <philippe.coval....@gmail.com> wrote:


On Tue, Jun 14, 2016 at 2:02 AM, JacobZ <jacob...@gmail.com> wrote:
Hi dev@lists.tizen.org,

I booted an Artik10 board with the Tizen 3.0 sd image per the below wiki, which then says to contact dev.tizen.org for the GPU-Mali 3rd party binaries. How do I get the HW acceleration (GPU-Mali) working? Please let me know.

https://wiki.tizen.org/wiki/Booting_Tizen_3.0_From_microSD_On_ARTIK

In order to use HW Acceleration(GPU-MALI) and WiFi/Bluetooth, you need to install 3rd-party binaries on ARTIK which cannot be distributed without your agreements. Please contact us using tizen mailing list (dev.tizen.org). it will be supported soon similar to TM-1 (http://developer.samsung.com/tizendevice/firmware)

  • WiFi: wlandrv-plugin-tizen-bcm43xx
  • BT: bluetooth-firmware-bcm-Artik
  • GPU(MALI)DDK

Hi,

Thanks for asking because this is also something I was wondering,
but as fallback you can use fbdev, I tested it with weston,

If it helps I documented how to build yocto images too,
and noticed that ethernet is working,
which is not the case on Tizen:Common, can you confirm ?
Maybe it worth to document more about Technical specs on our wiki (which have been recently spammed again).

Keep us updated
 
--

_______________________________________________
Dev mailing list
Dev@lists.tizen.org
https://lists.tizen.org/listinfo/dev


_______________________________________________
Dev mailing list
Dev@lists.tizen.org
https://lists.tizen.org/listinfo/dev

_______________________________________________
Dev mailing list
Dev@lists.tizen.org
https://lists.tizen.org/listinfo/dev

Reply via email to