Sorry, the latest is "vmlinuz-2.6.24-19-menlow-default kernel". -----Original Message----- From: Lopatin, Alexander L Sent: Wednesday, July 30, 2008 00:59 To: 'aneeskA'; [email protected] Subject: RE: [Moblin Dev] unable to boot menlow-default kernel
I am not sure if it will help, but the latest is "vmlinuz-2.6.22-31-menlow-default kernel". You can get it by selecting platform "menlow-lpia-ubuntu-hardy" in the image-creator. Good luck, Alex -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of aneeskA Sent: Tuesday, July 29, 2008 23:01 To: [email protected] Subject: [Moblin Dev] unable to boot menlow-default kernel somebody please help me. i am really stuck. heres the problem. i created an image for menlow using moblin image creator targeted at my atom processor with poulsbo chipset. when it boots up i am asked to select "vmlinuz-2.6.22-31-menlow-default kernel" by pressing ENTER . when i choose it, boot hangs showing " ata1 : PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001e060 irq 14 ata1 : PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001e068 irq 15 " even the whole board is simply stuck why is this? i wasn't able to find reference to such an issue any where else. please help. I have tried connecting a PATA hard disk thinking it will solve the problem. but it didn't. regards -- anees _______________________________________________ dev mailing list [email protected] https://www.moblin.org/mailman/listinfo/dev _______________________________________________ dev mailing list [email protected] https://www.moblin.org/mailman/listinfo/dev
