We have the same problem, and who knows the reason, anyone? THX! > Date: Fri, 13 Feb 2009 07:30:27 +0800> Subject: Re: [Moblin Dev] How to > rebuild kernel-2.6.29.rc2-13.1.moblin2.src.rpm> From: [email protected]> To: > [email protected]> CC: [email protected]> > hi LiTony,> > 2009/2/12 LiTony > <[email protected]>:> > Hi, Alex> >> > Can you tell me how to rebuild > kernel-2.6.29.rc2-13.1.moblin2.src.rpm?> >> > Can it work by forcing rpm to > use fuzz level 2?> >> > I use below command to rebuild kernel:> # rpmbuild > --rebuild --target i586 kernel-2.6.29.rc2-13.1.moblin2.src.rpm> it end with > exit 0, however it does not really build anything.> ( It is not patch failed, > so it is nothing to do with fuzz settings )> Here shows the rpmbuild log:> It > runs "cd linux-2.6.28" and then exit immediately.> > Executing(%build): > /bin/sh -e /var/tmp/rpm-tmp.FDCFgK> + umask 022> + cd /usr/src/redhat/BUILD> > + cd kernel-2.6.28> + LANG=C> + export LANG> + unset DISPLAY> + CFLAGS='-O2 > -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions> -fstack-protector > --param=ssp-buffer-size=4 -m32 -march=i586> -fasynchronous-unwind-tables'> + > export CFLAGS> + rm -rf > /usr/src/redhat/BUILDROOT/kernel-2.6.29.rc2-13.1.moblin2.i386> + mkdir -p > /usr/src/redhat/BUILDROOT/kernel-2.6.29.rc2-13.1.moblin2.i386/boot> + cd > linux-2.6.28> + exit 0> > Regards,> Axel> > > Thank you> >> >> Date: Fri, 6 > Feb 2009 08:22:09 +0800> >> Subject: Re: [Moblin Dev] How to rebuild> >> > kernel-2.6.29.rc2-13.1.moblin2.src.rpm> >> From: [email protected]> >> To: > [email protected]> >> CC: [email protected]> >>> >> 2009/2/6 axel lin > <[email protected]>:> >> > hi Arjan,> >> >> >> > 2009/2/6 Arjan van de Ven > <[email protected]>:> >> >> axel lin wrote:> >> >>>> >> >>> hi list,> >> > >>> I try to rebuild moblin2 kernel by rpmbuild.> >> >>> It seems no error > message, but rpmbuild stops quickly.> >> >>> ( Note: my build environment is > Fedora-10. )> >> >>>> >> >>> Below is the messages:> >> >>>> >> >>> > [r...@boost tmp]# rpmbuild --rebuild> >> >>> > kernel-2.6.29.rc2-13.1.moblin2.src.rpm> >> >>> >> >> you need to add --target > i586 to this command line> >> >> >> > I tried rpmbuild --rebuild --target > i586> >> > kernel-2.6.29.rc2-13.1.moblin2.src.rpm .> >> > The result is still > the same, nothing get build.> >> > And run rpmbuld -bb --target i586 > kernel.spec doesn't work, it doesn't> >> > really build the source code.> >> > >> >> Below is the build log:> >> In Executing(%build) section, nothing > build.> >>> >> [r...@boost SPECS]# rpmbuild --target i586 -bb kernel.spec> >> > Building target platforms: i586> >> Building for target i586> >> > Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.0FVce8> >> + umask 022> >> + cd > /root/rpmbuild/BUILD> >> + LANG=C> >> + export LANG> >> + unset DISPLAY> >> + > patch_command='patch -p1 -F1 -s'> >> + patch_command='patch -p1 -F2 -s'> >> + > '[' '!' -d kernel-2.6.28/vanilla-2.6.29-rc2 ']'> >> + cd kernel-2.6.28> >> + > '[' -d linux-2.6.28 ']'> >> + rm -rf deleteme> >> + mv linux-2.6.28 deleteme> > >> + rm -rf deleteme> >> + cp -rl vanilla-2.6.29-rc2 linux-2.6.28> >> + cd > linux-2.6.28> >> + cp /root/rpmbuild/SOURCES/config-crown-beach> >> > /root/rpmbuild/SOURCES/config-generic> >> /root/rpmbuild/SOURCES/config-ivi> > >> /root/rpmbuild/SOURCES/config-netbook .> >> + cp > /root/rpmbuild/SOURCES/merge.pl .> >> + make -f > /root/rpmbuild/SOURCES/Makefile.config VERSION=2.6.29.rc2> >> configs> >> > perl merge.pl config-netbook config-generic > kernel-netbook.config> >> perl > merge.pl config-crown-beach config-generic >> >> kernel-crown-beach.config> > >> perl merge.pl config-ivi config-generic > kernel-ivi.config> >> + > ApplyPatch linux-2.6-build-nonintconfig.patch> >> + local > patch=linux-2.6-build-nonintconfig.patch> >> + shift> >> + '[' '!' -f > /root/rpmbuild/SOURCES/linux-2.6-build-nonintconfig.patch ']'> >> + case > "$patch" in> >> + patch -p1 -F2 -s> >> + chmod +x scripts/checkpatch.pl> >> + > cp /root/rpmbuild/SOURCES/COPYING.modules Documentation/> >> + mkdir configs> > >> + for cfg in 'kernel-*.config'> >> ++ echo kernel-crown-beach.config > kernel-ivi.config kernel-netbook.config> >> ++ grep -c > kernel-crown-beach.config> >> + '[' 1 -eq 0 ']'> >> + for cfg in > 'kernel-*.config'> >> ++ echo kernel-crown-beach.config kernel-ivi.config > kernel-netbook.config> >> ++ grep -c kernel-ivi.config> >> + '[' 1 -eq 0 ']'> > >> + for cfg in 'kernel-*.config'> >> ++ echo kernel-crown-beach.config > kernel-ivi.config kernel-netbook.config> >> ++ grep -c kernel-netbook.config> > >> + '[' 1 -eq 0 ']'> >> + rm -f 'kernel-2.6.29.rc2-*debug.config'> >> + for > i in '*.config'> >> + mv kernel-crown-beach.config .config> >> + Arch=x86> >> > + make nonint_oldconfig> >> .config:412:warning: override: PCI_GOANY changes > choice state> >> .config:1842:warning: override: reassigning to symbol > FB_ARK> >> .config:1843:warning: override: reassigning to symbol FB_PM3> >> > .config:1844:warning: override: reassigning to symbol FB_CARMINE> >> > .config:1845:warning: override: reassigning to symbol FB_GEODE> >> > .config:1846:warning: override: reassigning to symbol FB_VIRTUAL> >> > .config:1847:warning: override: reassigning to symbol FB_METRONOME> >> > .config:1848:warning: override: reassigning to symbol FB_MB862XX> >> + echo > '# x86'> >> + cat .config> >> + for i in '*.config'> >> + mv > kernel-ivi.config .config> >> + Arch=x86> >> + make nonint_oldconfig> >> > .config:1842:warning: override: reassigning to symbol FB_ARK> >> > .config:1843:warning: override: reassigning to symbol FB_PM3> >> > .config:1844:warning: override: reassigning to symbol FB_CARMINE> >> > .config:1845:warning: override: reassigning to symbol FB_GEODE> >> > .config:1846:warning: override: reassigning to symbol FB_VIRTUAL> >> > .config:1847:warning: override: reassigning to symbol FB_METRONOME> >> > .config:1848:warning: override: reassigning to symbol FB_MB862XX> >> + echo > '# x86'> >> + cat .config> >> + for i in '*.config'> >> + mv > kernel-netbook.config .config> >> + Arch=x86> >> + make nonint_oldconfig> >> > .config:1842:warning: override: reassigning to symbol FB_ARK> >> > .config:1843:warning: override: reassigning to symbol FB_PM3> >> > .config:1844:warning: override: reassigning to symbol FB_CARMINE> >> > .config:1845:warning: override: reassigning to symbol FB_GEODE> >> > .config:1846:warning: override: reassigning to symbol FB_VIRTUAL> >> > .config:1847:warning: override: reassigning to symbol FB_METRONOME> >> > .config:1848:warning: override: reassigning to symbol FB_MB862XX> >> + echo > '# x86'> >> + cat .config> >> + find . '(' -name '*.orig' -o -name '*~' ')' > -exec rm -f '{}' ';'> >> + cd ..> >> + exit 0> >> Executing(%build): /bin/sh > -e /var/tmp/rpm-tmp.xbAv1h> >> + umask 022> >> + cd /root/rpmbuild/BUILD> >> > + cd kernel-2.6.28> >> + LANG=C> >> + export LANG> >> + unset DISPLAY> >> + > rm -rf /root/rpmbuild/BUILDROOT/kernel-2.6.29.rc2-13.1.moblin2.i386> >> + > mkdir -p> >> > /root/rpmbuild/BUILDROOT/kernel-2.6.29.rc2-13.1.moblin2.i386/boot> >> + cd > linux-2.6.28> >> + exit 0> >> Executing(%install): /bin/sh -e > /var/tmp/rpm-tmp.PCiZUr> >> + umask 022> >> + cd /root/rpmbuild/BUILD> >> + > cd kernel-2.6.28> >> + cd linux-2.6.28> >> + rm -rf> >> > /root/rpmbuild/BUILDROOT/kernel-2.6.29.rc2-13.1.moblin2.i386/lib/firmware> >> > + /usr/lib/rpm/check-buildroot> >> + /usr/lib/rpm/redhat/brp-compress> >> + > /usr/lib/rpm/redhat/brp-strip /usr/bin/strip> >> + > /usr/lib/rpm/redhat/brp-strip-static-archive /usr/bin/strip> >> + > /usr/lib/rpm/redhat/brp-strip-comment-note /usr/bin/strip> >> > /usr/bin/objdump> >> + /usr/lib/rpm/brp-python-bytecompile> >> + > /usr/lib/rpm/redhat/brp-python-hardlink> >> + > /usr/lib/rpm/redhat/brp-java-repack-jars> >> Checking for unpackaged file(s): > /usr/lib/rpm/check-files> >> > /root/rpmbuild/BUILDROOT/kernel-2.6.29.rc2-13.1.moblin2.i386> >> > Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.fx5pmC> >> + umask 022> >> + > cd /root/rpmbuild/BUILD> >> + cd kernel-2.6.28> >> + rm -rf > /root/rpmbuild/BUILDROOT/kernel-2.6.29.rc2-13.1.moblin2.i386> >> + exit 0> >> > [r...@boost SPECS]#> >>> >> >>> >> >> I'm interesting to learn why you want > to rebuild the kernel though...> >> >>> >> > I need to rebuild the kernel > because I want to include some wlan> >> > drivers that is not in default > moblin2 kernel.> >> >> >> > Regards,> >> > Axel> >> >> >>> >> > _______________________________________________> >> Moblin dev Mailing List> > >> [email protected]> >>> >> To manage or unsubscribe from this mailing > list visit:> >> https://lists.moblin.org/mailman/listinfo/dev or your user > account on> >> http://moblin.org once logged in.> >>> >> For more information > on the Moblin Developer Mailing lists visit:> >> > http://moblin.org/community/mailing-lists> >> >> > > ________________________________> > 更多热辣资讯尽在新版MSN首页！ 立刻访问！ _________________________________________________________________ MSN安全保护中心，免费修复系统漏洞，保护MSN安全！ http://im.live.cn/safe/ _______________________________________________ Moblin dev Mailing List [email protected]
To manage or unsubscribe from this mailing list visit: https://lists.moblin.org/mailman/listinfo/dev or your user account on http://moblin.org once logged in. For more information on the Moblin Developer Mailing lists visit: http://moblin.org/community/mailing-lists
