Hi Paul, Sorry for the inconvenience caused and thanks for updating me on my mistake. I will take care this from next time. I have mentioned the exact platform details, which is: Poulsbo: US15W Silverthorne processor: z530 (1.6 GHz) Kernel: Moblin 2.6.29-rc13-netbook-alpha1
Before this message, it gives one more debug message: "Timeout waiting for hardware interrupt" And then this message starts popping up. Even the system boots up, in background this message will keep on coming continuously. I hope this information would help in debugging the issue. Any small help or pointers will be highly appreciated. Regards, Vikas -----Original Message----- From: Paul Cooper [mailto:[email protected]] Sent: Wednesday, February 25, 2009 5:40 PM To: Vikas Gupta, Noida Cc: Arjan van de Ven; [email protected] Subject: Re: [Moblin Dev] mmc0: Got command interrupt 0x00030000 eventhough no command operation in progress?? Hi, First I would say that hitting mailing lists with frequent nags / reminders of a previous post is considered bad etiquette. Remember that folks on the list are in all sorts of timezones, have their own priorities, and like any open source project there is no SLA. I'm sure everyone on the list does their best to answer questions but the likelihood of help is often inversely proportional to the amount of nagging. As to the question, I would guess (and it is just a guess) what Arjan meant is that the SDIO/MMC hw is working mostly as the standard kernel driver expects, hence you can read write to the device, but subtle difference that is causing these errors. If you could give more detailed info on the platform and chipsets that would help (Menlow + Poulsbo covers a lot of devices and doesn't really help work out why *this* SDIO/MMC setup isn't working). Regards, Paul On Tue, 2009-02-24 at 22:17 +0530, Vikas Gupta, Noida wrote: > Any help please... > > -----Original Message----- > From: Vikas Gupta, Noida > Sent: Tuesday, February 24, 2009 3:27 PM > To: 'Arjan van de Ven' > Cc: '[email protected]' > Subject: RE: [Moblin Dev] mmc0: Got command interrupt 0x00030000 even > though no command operation in progress?? > > Any help/pointers?? > > -----Original Message----- > From: Vikas Gupta, Noida > Sent: Tuesday, February 24, 2009 9:47 AM > To: 'Arjan van de Ven' > Cc: [email protected] > Subject: RE: [Moblin Dev] mmc0: Got command interrupt 0x00030000 even > though no command operation in progress?? > > I am working on a Menlow platform which has a Poulsbo chipset in it. I > am using Moblin Net book live image release. It has an SDIO controller > which controls the MMC/SD card interface. This error starts showing up > only when we enable SDIO controller from BIOS. > > 1) When we say the MMC hardware is not compatible with the Standard > driver, what it meant? > 2) if It is not compatible then how I am able to access the SDCARD in > Moblin and it seems to be working fine, as I read and write the card and > it is doing fine. > > Please help me debug this issue as it is stalling our progress. > > -----Original Message----- > From: Arjan van de Ven [mailto:[email protected]] > Sent: Tuesday, February 24, 2009 9:32 AM > To: Vikas Gupta, Noida > Cc: [email protected] > Subject: Re: [Moblin Dev] mmc0: Got command interrupt 0x00030000 even > thoughno command operation in progress?? > > Vikas Gupta, Noida wrote: > > Hi, > > > > > > > > I am working on a menlow based platform and is using Moblin alpha > > install image for the same. > > > > When I boot my system, even if I am not habving any sdcard in the > > system, got this interrupt message now and then. > > you may have a system where the MMC hardware on the system is not > quite compatible with the standard driver... > what kind of system is this ? > > > DISCLAIMER: > ------------------------------------------------------------------------ ----------------------------------------------- > The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. > It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in > this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. > Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of > this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have > received this email in error please delete it and notify the sender immediately. Before opening any mail and > attachments please check them for viruses and defect. > ------------------------------------------------------------------------ ----------------------------------------------- > _______________________________________________ > Moblin dev Mailing List > [email protected] > > To manage or unsubscribe from this mailing list visit: > https://lists.moblin.org/mailman/listinfo/dev or your user account on http://moblin.org once logged in. > > For more information on the Moblin Developer Mailing lists visit: > http://moblin.org/community/mailing-lists -- Intel Open Source Technology Centre http://oss.intel.com/ _______________________________________________ Moblin dev Mailing List [email protected] To manage or unsubscribe from this mailing list visit: https://lists.moblin.org/mailman/listinfo/dev or your user account on http://moblin.org once logged in. For more information on the Moblin Developer Mailing lists visit: http://moblin.org/community/mailing-lists
