Hi Terry,
You could make a try installing the moblin2 image to a primary
partition. Thanks!
Best regards
Wan Shuang
________________________________
From: Zhang, Vivian
Sent: 2009年3月19日 16:03
To: terry chen; Wan, Shuang
Cc: [email protected]
Subject: RE: [Moblin Dev] Moblin alpha 2 partition error
Hi, terry:
Thanks for your info. It is a udev issue which is tracked by bug #382, it
has been fixed in latest udev package (version >= 136-15.1).
For a quick fix, you can modify the /etc/udev/makedev.d/00-base.files, add
nodes sdb5, sdb6 as below.
b /dev/sdb5 0660 root root 8 4
b /dev/sdb6 0660 root root 8 4
Thank.
-- vivian
________________________________
From: terry chen [mailto:[email protected]]
Sent: 2009年3月19日 15:48
To: Zhang, Vivian; Wan, Shuang
Cc: [email protected]
Subject: Re: [Moblin Dev] Moblin alpha 2 partition error
Hi Wang, Zhang,
Sorry for the slow reply. My device is MSI u100. The error message
is the pictures attached, and I can't retrive the log message. Thanks for your
help again!
Best Regards,
Terry
2009/3/19 Wan, Shuang <[email protected]<mailto:[email protected]>>
Hi Terry,
On our side it's ok to install Molbin on a multiple partition disk.
Could you provide more information of your hardware? Some software config file
and log are also very useful to figure out your problem. More particularly the
grub.conf file and kernel message saved in the /var/log/messages. Or even take
a photo of the error message you met.
Thanks!
Best regards
Wan Shuang
-----Original Message-----
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]<mailto:[email protected]>] On Behalf Of
terry chen
Sent: 2009年3月17日 14:51
To: [email protected]<mailto:[email protected]>
Subject: [Moblin Dev] Moblin alpha 2 partition error
Dear all:
I have a small question about the new Moblin alpha 2.
I have made the disk 2 partitions for multiple OS and data saving, and I
tried to use USB
made from MIC to boot and install. But somehow I can't boot after install.
My friend boot
successfully just once after installing. Thank you for your helping.
Error message:
i8042 controller self-test failed (0x77!=0x55)
And it told me super block could read ext2 file system which should work
theoretically.
Should I edit menu.lst or do something?
Do you have the same question? Thank you for your helping.
--
Best Regards,
Terry Chen
--------------------------------------------
Mobling Enable Center
_______________________________________________
Moblin dev Mailing List
[email protected]<mailto:[email protected]>
To manage or unsubscribe from this mailing list visit:
https://lists.moblin.org/mailman/listinfo/dev or your user account on
http://moblin.org once logged in.
For more information on the Moblin Developer Mailing lists visit:
http://moblin.org/community/mailing-lists
--
Best Regards,
��逸�� Terry Chen
--------------------------------------------
���F法人�Y��工�I策�M�� Linux���w工程��
�W路多媒�w研究所
105台北��民生�|路四段133��1��
Tel : 02-6600-0100 ext.518
_______________________________________________
Moblin dev Mailing List
[email protected]
To manage or unsubscribe from this mailing list visit:
https://lists.moblin.org/mailman/listinfo/dev or your user account on
http://moblin.org once logged in.
For more information on the Moblin Developer Mailing lists visit:
http://moblin.org/community/mailing-lists
