Hi Vandana, I just noticed you're using an older 2.1 preview release. Please use the Final 2.1 IVI release:
http://moblin.org/projects/2.1-ivi-project-releases The .ks file and images should work with no workarounds needed. If you do have problems, post them here again. Thanks, rs On 2/22/10 5:50 AM, "Zheng, Yanshuang" <yanshuang.zh...@intel.com> wrote: > Try one of these workarounds: > > 1) Enter single mode of the installed OS, yum update kernel-ivi to > 2.6.31.6-44.1(repo has been updated) and install pkg > xorg-x11-server-Xorg-setuid. Reboot should make X boot. > 2) Enter single mode of the installed OS, yum update kernel-ivi to > 2.6.31.6-44.1 and chmod +s /usr/bin/Xorg. Reboot should make X boot. > 3) modify the .ks file by adding "xorg-x11-server-Xorg-setuid" in Package > section, and then re-create the image using MIC2(repo has been updated with > new kernel 2.6.31.6-44.1). This should result in workable non-iegd image, both > live boot and real boot after installation. > > > Thanks, > Yanshuang > >> -----Original Message----- >> From: dev-boun...@moblin.org [mailto:dev-boun...@moblin.org] On Behalf Of >> Vandana Sasidharan >> Sent: 2010年2月22日 20:44 >> To: Selbak, Rolla N; dev@moblin.org >> Subject: Re: [Moblin Dev] Unable to boot the USB image created using MIC2 >> >> Im able to go to the single user mode using the 'tab'. Will do as >> selbak suggested with respect to the xorg.conf file and update. >> Thanks >> Vandana >> >> To: Vandana Sasidharan <vandana.sasidha...@tcs.com>, >> "dev@moblin.org" <dev@moblin.org> >> From: "Selbak, Rolla N" <rolla.n.sel...@intel.com> >> Date: 02/22/2010 12:58PM >> Subject: Re: [Moblin Dev] Unable to boot the USB image created using >> MIC2 >> You can go into Single user mode without installing by doing: >> When you boot up the livecd, once you see the boot menu, press >> 'tab'... >> It will allow you to add the word 'single' to the booting >> command-line (or any other run-level you like)... >> That will put you single-user mode... >> Also, I am taking look at the kernel again and making sure the IEGD >> code is out of there...seems like there is a bug where if the IEGD >> patch is applied, but the config is disabled, it won't allow Vesa to >> run correctly... >> rs >> On 2/21/10 9:00 PM, "Vandana Sasidharan" >> <vandana.sasidha...@tcs.com> wrote: >> Hi, >> The problem is since Im not able to install it Im not able to go to >> the single user mode. >> Is this problem due to the way Im burning it on to the USB stick or >> could something be wrong with the way the image was created? >> Vandana >> To: "Selbak, Rolla N" <rolla.n.sel...@intel.com>, Vandana Sasidharan >> <vandana.sasidha...@tcs.com>, "dev@moblin.org" <dev@moblin.org> >> From: "Selbak, Rolla N" <rolla.n.sel...@intel.com> >> Date: 02/19/2010 11:04PM >> Subject: Re: [Moblin Dev] Unable to boot the USB image created using >> MIC2 >> Also, if that doesn't work, boot in single-user...boot up to the >> kernel...then run 'X-configure' to automatically create an >> xorg.conf...then use that xorg.conf to try and 'startx'... >> I suspect the issue might be that...but I can't be sure until we at >> least assert that you can boot up to the kernel... >> rs >> On 2/19/10 9:21 AM, "Selbak, Rolla N" <rolla.n.sel...@intel.com> >> wrote: >> Ok try this.... >> Boot from single-user mode...see if the kernel comes up...then >> 'startx'... >> To boot to single-user, when the install menu comes up, press >> 'escape', then add the word 'Single' in the boot options... >> rs >> On 2/19/10 3:19 AM, "Vandana Sasidharan" >> <vandana.sasidha...@tcs.com> wrote: >> Hi, >> I initially used the command >> "sudo dd >> if=moblin-2.1-2.1-preview-ivi-noiegd-201002182031.usbimg of=/dev/sdb >> " >> to burn the image to the USB stick. >> After Selbak's suggestion I also tried the >> "moblin-image-writer -c >> moblin-2.1-2.1-preview-ivi-noiegd-201002182031.usbimg " >> but both give me only the blinking cursor on the black screenwhen I >> try to boot from the USB stick. >> I tried to install the image from the USB stick to a hard disk it >> gives me the error: >> "Waiting for system to settle before starting >> installation... >> 19:09:54 Fatal Error: X startup failed >> /usr/sbin/liveinst: line 90: kill: ' ' : not a pid >> or valid job spec >> INIT: no more processes left in this runlevel" >> I haven't tried the LiveCD yet. >> The command I used to create the image in the first place is >> "sudo moblin-image-creator --verbose --debug >> --config=2.1-preview-ivi-noiegd.ks --format=liveusb --cache=mycache" >> Any help???? >> Thanks >> Vandana >> =====-----=====-----===== >> Notice: The information contained in this e-mail >> message and/or attachments to it may contain >> confidential or privileged information. If you are >> not the intended recipient, any dissemination, use, >> review, distribution, printing or copying of the >> information contained in this e-mail message >> and/or attachments to it are strictly prohibited. If >> you have received this communication in error, >> please notify us by reply e-mail or telephone and >> immediately and permanently delete the message >> and any attachments. Thank you >> _______________________________________________ >> Moblin dev Mailing List >> dev@moblin.org >> To manage or unsubscribe from this mailing list visit: >> [1]http://lists.moblin.org/listinfo/dev or your user account on >> [2]http://moblin.org once logged in. >> For more information on the Moblin Developer Mailing lists visit: >> [3]http://moblin.org/community/mailing-lists >> =====-----=====-----===== >> Notice: The information contained in this e-mail >> message and/or attachments to it may contain >> confidential or privileged information. If you are >> not the intended recipient, any dissemination, use, >> review, distribution, printing or copying of the >> information contained in this e-mail message >> and/or attachments to it are strictly prohibited. If >> you have received this communication in error, >> please notify us by reply e-mail or telephone and >> immediately and permanently delete the message >> and any attachments. Thank you >> >> =====-----=====-----===== >> Notice: The information contained in this e-mail >> message and/or attachments to it may contain >> confidential or privileged information. If you are >> not the intended recipient, any dissemination, use, >> review, distribution, printing or copying of the >> information contained in this e-mail message >> and/or attachments to it are strictly prohibited. If >> you have received this communication in error, >> please notify us by reply e-mail or telephone and >> immediately and permanently delete the message >> and any attachments. Thank you >> >> References >> >> 1. http://lists.moblin.org/listinfo/dev >> 2. http://moblin.org/ >> 3. http://moblin.org/community/mailing-lists >> _______________________________________________ >> Moblin dev Mailing List >> dev@moblin.org >> >> To manage or unsubscribe from this mailing list visit: >> http://lists.moblin.org/listinfo/dev or your user account on >> http://moblin.org once >> logged in. >> >> For more information on the Moblin Developer Mailing lists visit: >> http://moblin.org/community/mailing-lists _______________________________________________ Moblin dev Mailing List dev@moblin.org To manage or unsubscribe from this mailing list visit: http://lists.moblin.org/listinfo/dev or your user account on http://moblin.org once logged in. For more information on the Moblin Developer Mailing lists visit: http://moblin.org/community/mailing-lists
