Hi Guys, Let’s focus on specific issue here.
Marking the master branch protected which involves “Only merge if checks has passed, and yes it will run the complete build”. We can’t afford to degrade the quality and keep debugging the build failure forever. If it’s slow down the development at the cost of quality I will vote for the quality. We can work on improving the infrastructure to improve the overall speed. If you have any specific concerns on availability of Jenkins please point out. -Gautam On 9/28/17, 11:38 AM, "Chris Olivier" <[email protected]> wrote: -1000 on that. :) On Thu, Sep 28, 2017 at 11:33 AM Naveen Swamy <[email protected]> wrote: > PR->Sanity test/Linux build/test->reviewer/committer approves the > change->Comment "Build Now" (Or trigger on at least one approval from a > committer other than author)->*Full build-*>*passes build*->Enable Merge > > Let us take this particular topic to a separate thread or discuss offline > if further clarification is needed. > > On Thu, Sep 28, 2017 at 11:24 AM, Chris Olivier <[email protected]> > wrote: > > > I understand the proposal. How to trigger a build in that case? > > > > > > On Thu, Sep 28, 2017 at 10:54 AM Madan Jampani <[email protected]> > > wrote: > > > > > Chris, > > > I don't think Naveen is suggesting that a merge happen without full > > > verification i.e. all tests across all platforms pass. > > > If a PR has some back and forth and results in multiple revisions > (which > > is > > > arguably more common than a random unit test failing), we simply delay > > full > > > verification until the owner/reviewer have settled on a mutually > > acceptable > > > state. > > > > > > On Thu, Sep 28, 2017 at 10:25 AM, Chris Olivier <[email protected] > > > > > wrote: > > > > > > > -1 for running only partial tests. Most failing unit tests that get > > > > through fail only for certain platforms/configurations. I personally > > > > prefer to be assured the build and test is good before merge. Most > PR > > > > merges aren't in a huge hurry. > > > > > > > > On Thu, Sep 28, 2017 at 9:54 AM, Naveen Swamy <[email protected]> > > > wrote: > > > > > > > > > +1 to make it protected. Here is what I am thinking for PR builds > > > > > on a PR run Sanity Tests + build/test one platform->committer > reviews > > > the > > > > > code and issues "Build Now", a full build is run->Github checks > that > > > the > > > > > full build checks succeed before it can be merged. > > > > > > > > > > I agree with Madan that PR should be approved by one another > > committer. > > > > > > > > > > > > > > > > > > > > On Thu, Sep 28, 2017 at 9:37 AM, Madan Jampani < > > > [email protected]> > > > > > wrote: > > > > > > > > > > > +1 > > > > > > > > > > > > At a minimum I'd like to see the following two happen: > > > > > > - Option to merge is disabled until all required checks pass. > > > > > > - Code is reviewed and given +1 by at least one other committer > (no > > > > self > > > > > > review). > > > > > > > > > > > > On Wed, Sep 27, 2017 at 11:15 PM, Gautam <[email protected]> > > > wrote: > > > > > > > > > > > > > Hi Chris, > > > > > > > > > > > > > > Here <https://help.github.com/articles/about-protected- > > branches/ > > > > > > > > is > > > > > > > user > > > > > > > document on semantics of protected branch. > > > > > > > In short when a branch is protected following applies to that > > > branch. > > > > > > > > > > > > > > - Can't be force pushed > > > > > > > - Can't be deleted > > > > > > > - Can't have changes merged into it until required status > > checks > > > > > > > <https://help.github.com/articles/about-required- > > status-checks> > > > > > pass > > > > > > > - Can't have changes merged into it until required reviews > are > > > > > > approved > > > > > > > <https://help.github.com/articles/approving-a-pull- > > > > > > > request-with-required-reviews> > > > > > > > - Can't be edited or have files uploaded to it from the web > > > > > > > - Can't have changes merged into it until changes to files > > that > > > > > > > have a designated > > > > > > > code owner <https://help.github.com/ > > articles/about-codeowners/> > > > > > have > > > > > > > been approved by that owner > > > > > > > > > > > > > > I am sure many of us might not want to have all these but we > can > > > > > debate > > > > > > on > > > > > > > it. My main motive was to "*Can't have changes merged into it > > until > > > > > > > required status checks pass*" > > > > > > > > > > > > > > > > > > > > > -Gautam > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, Sep 27, 2017 at 11:09 PM, Chris Olivier < > > > > [email protected] > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > What does that mean? "Protected"? Protected from what? > > > > > > > > > > > > > > > > On Wed, Sep 27, 2017 at 11:08 PM Gautam < > [email protected]> > > > > > wrote: > > > > > > > > > > > > > > > > > Hi Chris, > > > > > > > > > > > > > > > > > > I mean make "master branch protected" of MXNet. > > > > > > > > > > > > > > > > > > -Gautam > > > > > > > > > > > > > > > > > > On Wed, Sep 27, 2017 at 11:04 PM, Chris Olivier < > > > > > > [email protected] > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > What does this mean? "Mx-net branch protected"? > > > > > > > > > > > > > > > > > > > > On Wed, Sep 27, 2017 at 9:59 PM Tsuyoshi OZAWA < > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > +1, > > > > > > > > > > > > > > > > > > > > > > While I'm checking the recent build failures, and I > think > > > the > > > > > > > > decision > > > > > > > > > > > of making the mx-net branch protected is necessary for > > > stable > > > > > > > > > > > building. > > > > > > > > > > > Thanks Kumar for resuming important discussion. > > > > > > > > > > > > > > > > > > > > > > Best regards > > > > > > > > > > > - Tsuyoshi > > > > > > > > > > > > > > > > > > > > > > On Thu, Sep 28, 2017 at 12:56 PM, Kumar, Gautam < > > > > > > [email protected]> > > > > > > > > > > wrote: > > > > > > > > > > > > Reviving the discussion. > > > > > > > > > > > > > > > > > > > > > > > > At this point of time we have couple of stable builds > > > > > > > > > > > > > > > > > > > > > > > > https://builds.apache.org/view/Incubator%20Projects/job/ > > > > > > > > > > incubator-mxnet/job/master/448/ > > > > > > > > > > > > > > > > > > > > > > > > https://builds.apache.org/view/Incubator%20Projects/job/ > > > > > > > > > > incubator-mxnet/job/master/449/ > > > > > > > > > > > > > > > > > > > > > > > > Should we have a quick discussion or polling on > making > > > the > > > > > > mx-net > > > > > > > > > > branch > > > > > > > > > > > protected? If you still think we shouldn’t make it > > > protected > > > > > > please > > > > > > > > > > provide > > > > > > > > > > > a reason to support your claim. > > > > > > > > > > > > > > > > > > > > > > > > Few of us have concern over Jenkin’s stability. If I > > look > > > > two > > > > > > > weeks > > > > > > > > > > > back, after upgrading Linux slave to g2.8x and new > > windows > > > > AMI, > > > > > > we > > > > > > > > have > > > > > > > > > > not > > > > > > > > > > > seen any case where instance died due to high memory > > usage > > > or > > > > > any > > > > > > > > > process > > > > > > > > > > > got killed due to high cpu usage or any other issue > with > > > > > windows > > > > > > > > > slaves. > > > > > > > > > > > > > > > > > > > > > > > > Going forward we are also planning that if we add any > > new > > > > > slave > > > > > > > we > > > > > > > > > will > > > > > > > > > > > not enable the main load immediately, but rather will > do > > > > ‘test > > > > > > > build’ > > > > > > > > > to > > > > > > > > > > > make sure that new slaves are not causing any > > > infrastructure > > > > > > issue > > > > > > > > and > > > > > > > > > > > capable to perform as good as existing slaves. > > > > > > > > > > > > > > > > > > > > > > > > -Gautam > > > > > > > > > > > > > > > > > > > > > > > > On 8/31/17, 5:27 PM, "Lupesko, Hagay" < > > [email protected] > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > @madan looking into some failures – you’re right… > > > > there’s > > > > > > > > > multiple > > > > > > > > > > > issues going on, some of them intermittent, and we want > > to > > > be > > > > > > able > > > > > > > to > > > > > > > > > > merge > > > > > > > > > > > fixes in. > > > > > > > > > > > > Agreed that we can wait with setting up protected > > > mode > > > > > > until > > > > > > > > > build > > > > > > > > > > > stabilizes. > > > > > > > > > > > > > > > > > > > > > > > > On 8/31/17, 11:41, "Madan Jampani" < > > > > > > [email protected]> > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > @hagay: we agree on the end state. I'm not > too > > > > > > particular > > > > > > > > > about > > > > > > > > > > > how we get > > > > > > > > > > > > there. If you think enabling it now and fixes > > > > > > regression > > > > > > > > > later > > > > > > > > > > > is doable, > > > > > > > > > > > > I'm fine with. I see a bit of a chicken and > egg > > > > > > problem. > > > > > > > We > > > > > > > > > > need > > > > > > > > > > > to get > > > > > > > > > > > > some fixes in even when the status checks are > > > > > failing. > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Aug 31, 2017 at 11:25 AM, Lupesko, > > Hagay > > > < > > > > > > > > > > > [email protected]> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > @madan – re: getting to a stable CI first: > > > > > > > > > > > > > I’m concerned that by not enabling > protected > > > > branch > > > > > > > mode > > > > > > > > > > ASAP, > > > > > > > > > > > we’re just > > > > > > > > > > > > > taking in more regressions, which makes a > > > stable > > > > > > build > > > > > > > a > > > > > > > > > > > moving target for > > > > > > > > > > > > > us… > > > > > > > > > > > > > > > > > > > > > > > > > > On 8/31/17, 10:49, "Zha, Sheng" < > > > > > [email protected] > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > Just one thing: please don’t disable > more > > > > tests > > > > > > or > > > > > > > > just > > > > > > > > > > > raise the > > > > > > > > > > > > > tolerance thresholds. > > > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > > -sz > > > > > > > > > > > > > > > > > > > > > > > > > > On 8/31/17, 10:45 AM, "Madan Jampani" < > > > > > > > > > > > [email protected]> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > +1 > > > > > > > > > > > > > Before we can turn protected mode I > > > feel > > > > we > > > > > > > > should > > > > > > > > > > > first get to a > > > > > > > > > > > > > stable CI > > > > > > > > > > > > > pipeline. > > > > > > > > > > > > > Sandeep is chasing down known > > breaking > > > > > > issues. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Aug 31, 2017 at 10:27 AM, > > Hagay > > > > > > > Lupesko < > > > > > > > > > > > [email protected]> > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > Build stability is a major issue, > > > > builds > > > > > > have > > > > > > > > > been > > > > > > > > > > > failing left > > > > > > > > > > > > > and right > > > > > > > > > > > > > > over the last week. Some of it is > > due > > > > to > > > > > > > > Jenkins > > > > > > > > > > > slave issues, > > > > > > > > > > > > > but some are > > > > > > > > > > > > > > real regressions. > > > > > > > > > > > > > > We need to be more strict in the > > code > > > > > we're > > > > > > > > > > > committing. > > > > > > > > > > > > > > > > > > > > > > > > > > > > I propose we configure our master > > to > > > > be a > > > > > > > > > protected > > > > > > > > > > > branch ( > > > > > > > > > > > > > > > > > > > > > > > > > https://help.github.com/articles/about-protected- > > branches/ > > > ). > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thoughts? > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 2017-08-28 22:41, sandeep > > > > > krishnamurthy > > > > > > < > > > > > > > > > > > [email protected]> > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > Hello Committers and > > Contributors,> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Due to unstable build > pipelines, > > > from > > > > > > past > > > > > > > 1 > > > > > > > > > > week, > > > > > > > > > > > PRs are > > > > > > > > > > > > > being merged> > > > > > > > > > > > > > > > after CR ignoring PR build > > status. > > > > > Build > > > > > > > > > pipeline > > > > > > > > > > > is much more > > > > > > > > > > > > > stable > > > > > > > > > > > > > > than> > > > > > > > > > > > > > > > last week and most of the build > > > > > failures > > > > > > > you > > > > > > > > > see > > > > > > > > > > > from now on, > > > > > > > > > > > > > are likely > > > > > > > > > > > > > > to> > > > > > > > > > > > > > > > be a valid failure and hence, > it > > is > > > > > > > > recommended > > > > > > > > > > to > > > > > > > > > > > wait for PR > > > > > > > > > > > > > builds, > > > > > > > > > > > > > > see> > > > > > > > > > > > > > > > the root cause of any build > > > failures > > > > > > before > > > > > > > > > > > proceeding with > > > > > > > > > > > > > merges.> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > At this point of time, there > are > > 2 > > > > > > > > intermittent > > > > > > > > > > > issue yet to > > > > > > > > > > > > > be fixed -> > > > > > > > > > > > > > > > * Network error leading to > GitHub > > > > > > requests > > > > > > > > > > > throwing 404> > > > > > > > > > > > > > > > * A conflict in artifacts > > generated > > > > > > between > > > > > > > > > > > branches/PR - > > > > > > > > > > > > > Cause unknown > > > > > > > > > > > > > > yet.> > > > > > > > > > > > > > > > These issues will be fixed > soon.> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > > Sandeep Krishnamurthy> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > - Tsuyoshi > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > Best Regards, > > > > > > > > > Gautam Kumar > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > Best Regards, > > > > > > > Gautam Kumar > > > > > > > > > > > > > > > > > > > > > > > > > > > >
