I gave checking a shot but am now getting -- Downloading MKLML... CMake Error at cmake/DownloadMKLML.cmake:62 (file): file DOWNLOAD HASH mismatch
Assuming that's a transient mkl dep download error, I'll try again later. On Sat, May 4, 2019 at 12:09 AM Junru Shao <junrushao1...@gmail.com> wrote: > Thank you Anirudh for your quick response! I will change the result > accordingly :-) > > On Fri, May 3, 2019 at 11:58 PM Anirudh Subramanian <anirudh2...@gmail.com > > > wrote: > > > No worries, maybe its just something with my setup. > > Moving my vote to +0, pending someone else check. > > > > On Fri, May 3, 2019 at 11:39 PM Junru Shao <junrushao1...@gmail.com> > > wrote: > > > > > Hi Anirudh, > > > > > > Thanks for reporting this! > > > > > > I verified on my EC2 machine for the second time. It perfectly builds > > with > > > your commands. It is a bit weird...I noticed that there is a subtle > > > difference that my ninja progress bar is like "[xxx/506]", while yours > is > > > "[xxx/488]". I am not sure if there is anything different between our > > > settings. > > > > > > My understanding is that cmake should work because it is tested in our > CI > > > system under "ci/jenkins/incubator-mxnet" ( > > > > > > > > > http://jenkins.mxnet-ci.amazon-ml.com/blue/organizations/jenkins/incubator-mxnet/detail/v1.4.x/201/pipeline > > > ). > > > > > > It will be much appreciated if someone could help confirm whether cmake > > > works on their side. > > > > > > Thanks, > > > Junru > > > > > > > > > On Fri, May 3, 2019 at 9:43 PM Anirudh Subramanian < > > anirudh2...@gmail.com> > > > wrote: > > > > > > > Hi Junru, > > > > > > > > I am on v1.4.x , and my dmlc-core commit is this one : > > > > > > > > > > > > > > https://github.com/dmlc/dmlc-core/tree/0a0e8addf92e1287fd7a25c6314016b8c0138dee > > > > > > > > Anirudh > > > > > > > > On Fri, May 3, 2019 at 8:30 PM Junru Shao <junrushao1...@gmail.com> > > > wrote: > > > > > > > > > Hey Anirudh, > > > > > > > > > > Although the vote has been closed, I am very interested in digging > > into > > > > > this issue. > > > > > > > > > > I build on my EC2 machine using your instructions, and it seems > that > > > > > everything is working fine... > > > > > > > > > > Then, I noticed that your issue seems to be related to unittests in > > > > > dmlc-core, not in mxnet. Could you kindly check the submodule git > > hash? > > > > > Also, could you check if you are testing on v1.4.x branch? > > > > > > > > > > Thanks, > > > > > Junru > > > > > > > > > > > > > > > > > > > > On Fri, May 3, 2019 at 4:33 PM Anirudh Subramanian < > > > > anirudh2...@gmail.com> > > > > > wrote: > > > > > > > > > > > -1 (binding) > > > > > > > > > > > > Is the cmake build failing for the 1.4.1 release tag ? Is this a > > > known > > > > > > issue ? > > > > > > > > > > > > Did the following: > > > > > > > > > > > > cd build && cmake VERBOSE=1 -DUSE_CUDA=ON -DUSE_CUDNN=ON > > > > -DUSE_OPENMP=ON > > > > > > -DCMAKE_BUILD_TYPE=Debug -DUSE_DIST_KVSTORE=0 -DUSE_OPENCV=1 > > > > > > -DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda > > -DCUDNN_ROOT=/usr/local/cuda > > > > > > -DUSE_MKLDNN=1 -DUSE_MKL_IF_AVAILABLE=1 -DUSE_MKLML_MKL=1 > > > -DUSE_ASAN=0 > > > > > > -GNinja -DUSE_OPERATOR_TUNING=1 -DUSE_CPP_PACKAGE=0 > > > > -DCUDA_ARCH_NAME=Auto > > > > > > .. && ninja -v > > > > > > > > > > > > [272/488] : && /usr/bin/c++ -Wall -Wno-unknown-pragmas -fPIC -g > > -O0 > > > > > > -msse2 -std=c++11 -fopenmp -g -pthread > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_lockfree.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_param.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_parser.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_array_view.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_any.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_config.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_threaditer.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_serializer.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_threaditer_exc_handling.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_inputsplit.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_logging.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_json.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_optional.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_main.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_env.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_thread_group.cc.o > > > > > > -o 3rdparty/dmlc-core/test/unittest/dmlc_unit_tests -rdynamic > > > > > > lib/libgtestd.a 3rdparty/dmlc-core/libdmlc.a -lpthread && : > > > > > > FAILED: : && /usr/bin/c++ -Wall -Wno-unknown-pragmas -fPIC -g > -O0 > > > > > -msse2 > > > > > > -std=c++11 -fopenmp -g -pthread > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_lockfree.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_param.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_parser.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_array_view.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_any.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_config.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_threaditer.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_serializer.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_threaditer_exc_handling.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_inputsplit.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_logging.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_json.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_optional.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_main.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_env.cc.o > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_thread_group.cc.o > > > > > > -o 3rdparty/dmlc-core/test/unittest/dmlc_unit_tests -rdynamic > > > > > > lib/libgtestd.a 3rdparty/dmlc-core/libdmlc.a -lpthread && : > > > > > > > > > > > > > > > > > > > > > > > > > > > 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_logging.cc.o: > > > > > > In function `Logging_basics_Test::TestBody()': > > > > > > > > > > > > > > > > > > > > > > > > > > > /home/ubuntu/experimentals/master_mxnet/build/../3rdparty/dmlc-core/test/unittest/unittest_logging.cc:19: > > > > > > undefined reference to `testing::internal::DeathTest::Create(char > > > > const*, > > > > > > testing::internal::RE const*, char const*, int, > > > > > > testing::internal::DeathTest**)' > > > > > > collect2: error: ld returned 1 exit status > > > > > > > > > > > > Anirudh > > > > > > > > > > > > On Fri, May 3, 2019 at 8:04 AM kellen sunderland < > > > > > > kellen.sunderl...@gmail.com> wrote: > > > > > > > > > > > > > No problem Damien, glad to have you helping us validating the > > > > release. > > > > > > > Just wanted to make suer we have enough votes to pass the > general > > > > vote > > > > > > (the > > > > > > > next release step) and with Sheng I think we should. > > > > > > > > > > > > > > On Fri, May 3, 2019 at 7:52 AM Damien Stanton < > > > > > damien.stan...@gmail.com> > > > > > > > wrote: > > > > > > > > > > > > > > > Ah, I misunderstood the binding/non-binding distinction. I am > > > not a > > > > > > PPMC > > > > > > > > member, so my vote is non-binding. > > > > > > > > > > > > > > > > Best, > > > > > > > > Damien > > > > > > > > > > > > > > > > On Fri, May 3, 2019 at 3:19 AM kellen sunderland < > > > > > > > > kellen.sunderl...@gmail.com> wrote: > > > > > > > > > > > > > > > > > Hi Junru could you give a quick summary of the binding / > > > > > non-binding > > > > > > > > votes. > > > > > > > > > > > > > > > > > > Damien just want to confirm, are you a member of the PPMC > for > > > > > MXNet? > > > > > > > > > Usually committers or community members (like most of us) > are > > > > > > > encouraged > > > > > > > > to > > > > > > > > > test and vote, but technically count as non-binding for > > > releases. > > > > > > > > > > > > > > > > > > Sheng can we assume you're +1 on the release? > > > > > > > > > > > > > > > > > > On Fri, May 3, 2019 at 12:09 AM Junru Shao < > > > > > junrushao1...@gmail.com> > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > Hi folks, > > > > > > > > > > > > > > > > > > > > So far we have collected enough binding votes. Thank you > > guys > > > > for > > > > > > the > > > > > > > > > hard > > > > > > > > > > work testing the release! > > > > > > > > > > > > > > > > > > > > The vote on dev@ is closed on May 02 23:59:59 (PST). > Next, > > > we > > > > > are > > > > > > > > going > > > > > > > > > to > > > > > > > > > > vote for the Apache MXNet (incubating) release 1.4.1 on > > > > general@ > > > > > > > > > tomorrow, > > > > > > > > > > which starts on May 3 2019, 23:59:59 PST, and ends on May > > 07 > > > > > 2019, > > > > > > > > > 23:59:59 > > > > > > > > > > PST. > > > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > > Junru > > > > > > > > > > > > > > > > > > > > On Thu, May 2, 2019 at 11:29 PM Aston Zhang < > > > > > astonlzh...@gmail.com > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > +1 (non-binding) > > > > > > > > > > > > > > > > > > > > > > Passed all the code at zh.d2l.ai > > > > > > > > > > > > > > > > > > > > > > On Thu, May 2, 2019 at 1:46 PM Joshua Z. Zhang < > > > > > > > cheungc...@gmail.com > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > +1 (non-binding) > > > > > > > > > > > > > > > > > > > > > > > > Build from source with cuda/cudnn. > > > > > > > > > > > > > > > > > > > > > > > > - All tests passed > > > > > > > > > > > > - GluonCV unittest scripts passed > > > > > > > > > > > > - GluonCV training scripts passed > > > > > > > > > > > > - No issue with python multiprocessing > > > > > > > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > > > > Zhi > > > > > > > > > > > > > On May 2, 2019, at 11:34 AM, kellen sunderland < > > > > > > > > > > > > kellen.sunderl...@gmail.com> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > +1 (non-binding) > > > > > > > > > > > > > > > > > > > > > > > > > > I checked TRT integration builds and tests pass. > > > > > > > > > > > > > MD5s > > > > > > > > > > > > > Sigs look good. > > > > > > > > > > > > > > > > > > > > > > > > > > -Kellen > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, May 2, 2019 at 10:51 AM Damien Stanton < > > > > > > > > > > > damien.stan...@gmail.com > > > > > > > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > >> +1 (binding) > > > > > > > > > > > > >> > > > > > > > > > > > > >> Built from source / Scala / Clojure. All tests > pass. > > > The > > > > > > only > > > > > > > > > issue > > > > > > > > > > of > > > > > > > > > > > > >> minor note: The macOS build guide indicates a > > > directive > > > > > > `brew > > > > > > > > > > install > > > > > > > > > > > > >> opencv` however this installs OpenCV 4, which is > > > > currently > > > > > > > > > > > incompatible > > > > > > > > > > > > >> with mxnet and causes a failed build. The guide > > should > > > > > > specify > > > > > > > > > `brew > > > > > > > > > > > > >> install opencv@3` until/if version 4 is > supported. > > > > > > > > > > > > >> > > > > > > > > > > > > >> Best, > > > > > > > > > > > > >> Damien > > > > > > > > > > > > >> > > > > > > > > > > > > >> On Thu, May 2, 2019 at 12:53 PM Lai Wei < > > > > > > roywei...@gmail.com> > > > > > > > > > > wrote: > > > > > > > > > > > > >> > > > > > > > > > > > > >>> +1 > > > > > > > > > > > > >>> > > > > > > > > > > > > >>> Built from source and tested keras-mxnet working > > > fine. > > > > > > > > > > > > >>> > > > > > > > > > > > > >>> Best Regards > > > > > > > > > > > > >>> > > > > > > > > > > > > >>> Lai > > > > > > > > > > > > >>> > > > > > > > > > > > > >>> > > > > > > > > > > > > >>> On Wed, May 1, 2019 at 4:22 PM Carin Meier < > > > > > > > > carinme...@gmail.com > > > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > >>> > > > > > > > > > > > > >>>> + 1 (binding) > > > > > > > > > > > > >>>> > > > > > > > > > > > > >>>> Built Scala/ Clojure and ran tests > > > > > > > > > > > > >>>> > > > > > > > > > > > > >>>> On Wed, May 1, 2019 at 7:06 PM Aaron Markham < > > > > > > > > > > > > >> aaron.s.mark...@gmail.com> > > > > > > > > > > > > >>>> wrote: > > > > > > > > > > > > >>>> > > > > > > > > > > > > >>>>> Make that +1 (non-binding) > > > > > > > > > > > > >>>>> > > > > > > > > > > > > >>>>> On Wed, May 1, 2019 at 3:42 PM Aaron Markham < > > > > > > > > > > > > >>> aaron.s.mark...@gmail.com> > > > > > > > > > > > > >>>>> wrote: > > > > > > > > > > > > >>>>>> > > > > > > > > > > > > >>>>>> +1 (binding) > > > > > > > > > > > > >>>>>> > > > > > > > > > > > > >>>>>> * Built with GPU and tested the first part of > > the > > > > ssd > > > > > > > > example. > > > > > > > > > > > > >>>>>> * Built with GPU / cross-compiled to arm8 for > > > > Jetson. > > > > > > > > > > > > >>>>>> * Built Scala/Java on top of the > cross-compiled > > > arm8 > > > > > > (ran > > > > > > > > into > > > > > > > > > > > > >>> trouble > > > > > > > > > > > > >>>>>> here, but I think this is not popular enough > yet > > > to > > > > > > derail > > > > > > > > > > things, > > > > > > > > > > > > >>>>>> plus there are workarounds) > > > > > > > > > > > > >>>>>> * Built on CPU instance and tested docs. > > > > > > > > > > > > >>>>>> > > > > > > http://34.201.8.176/versions/1.4.1/api/python/io/io.html > > > > > > > > > > > > >>>>>> I don't see anything specific being different > in > > > > this > > > > > > > patch > > > > > > > > > for > > > > > > > > > > > > >> docs, > > > > > > > > > > > > >>>>>> so hard to tell if there's an issue. I'll > assume > > > not > > > > > > given > > > > > > > > the > > > > > > > > > > > > >>>>>> successful generation of the API docs. > > > > > > > > > > > > >>>>>> > > > > > > > > > > > > >>>>>> > > > > > > > > > > > > >>>>>> On Wed, May 1, 2019 at 1:28 PM Pedro Larroy > > > > > > > > > > > > >>>>>> <pedro.larroy.li...@gmail.com> wrote: > > > > > > > > > > > > >>>>>>> > > > > > > > > > > > > >>>>>>> +1 (non-binding) > > > > > > > > > > > > >>>>>>> > > > > > > > > > > > > >>>>>>> Tried CPU build + C++ tests + 714 Python unit > > > tests > > > > > in > > > > > > > > 605s. > > > > > > > > > > > > >>>>>>> ARMv7 build + small unit test in QEMU + ARMv8 > > > > builds. > > > > > > > > > > > > >>>>>>> > > > > > > > > > > > > >>>>>>> Thanks. Regards > > > > > > > > > > > > >>>>>>> > > > > > > > > > > > > >>>>>>> Pedro. > > > > > > > > > > > > >>>>>>> > > > > > > > > > > > > >>>>>>> On Wed, May 1, 2019 at 10:41 AM Qing Lan < > > > > > > > > > lanking...@live.com> > > > > > > > > > > > > >>>> wrote: > > > > > > > > > > > > >>>>>>>> > > > > > > > > > > > > >>>>>>>> +1 (binding) > > > > > > > > > > > > >>>>>>>> > > > > > > > > > > > > >>>>>>>> build from source works for OSX and Ubuntu > CPU > > > > > > > > > > > > >>>>>>>> Scala build/test successfully with Dynamic > > link > > > > and > > > > > > > static > > > > > > > > > > > > >> link. > > > > > > > > > > > > >>>>>>>> > > > > > > > > > > > > >>>>>>>> Thanks, > > > > > > > > > > > > >>>>>>>> Qing > > > > > > > > > > > > >>>>>>>> > > > > > > > > > > > > >>>>>>>> ________________________________ > > > > > > > > > > > > >>>>>>>> From: Sheng Zha <zhash...@apache.org> > > > > > > > > > > > > >>>>>>>> Sent: Wednesday, May 1, 2019 13:14 > > > > > > > > > > > > >>>>>>>> To: d...@mxnet.apache.org > > > > > > > > > > > > >>>>>>>> Subject: Re: [VOTE] Release Apache MXNet > > > > > (incubating) > > > > > > > > > version > > > > > > > > > > > > >>>>> 1.4.1.rc0 > > > > > > > > > > > > >>>>>>>> > > > > > > > > > > > > >>>>>>>> Hi all, > > > > > > > > > > > > >>>>>>>> > > > > > > > > > > > > >>>>>>>> Reminder that the vote for 1.4.1 release is > > > still > > > > > > > ongoing. > > > > > > > > > If > > > > > > > > > > > > >> you > > > > > > > > > > > > >>>>> can, please help out. Thank you. > > > > > > > > > > > > >>>>>>>> > > > > > > > > > > > > >>>>>>>> -sz > > > > > > > > > > > > >>>>>>>> > > > > > > > > > > > > >>>>>>>> On 2019/04/30 06:51:45, Junru Shao < > > > > > > > > junrushao1...@gmail.com > > > > > > > > > > > > > > > > > > > > > > >>>> wrote: > > > > > > > > > > > > >>>>>>>>> Dear MXNet community, > > > > > > > > > > > > >>>>>>>>> > > > > > > > > > > > > >>>>>>>>> This is the 3-day vote to release Apache > > MXNet > > > > > > > > (incubating) > > > > > > > > > > > > >>>>> version v1.4.1. > > > > > > > > > > > > >>>>>>>>> The voting on dev@ list will start Apr 29 > > > > 23:59:59 > > > > > > > (PST) > > > > > > > > > and > > > > > > > > > > > > >>>>> close on May > > > > > > > > > > > > >>>>>>>>> 02 23:59:59. > > > > > > > > > > > > >>>>>>>>> > > > > > > > > > > > > >>>>>>>>> Below are links to > > > > > > > > > > > > >>>>>>>>> 1) Release notes: > > > > > > > > > > > > >>>>>>>>> > > > > > > > > > > > > >>>>> > > > > > > > > > > > > >>>> > > > > > > > > > > > > >>> > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/MXNET/Apache+MXNet+%28incubating%29+1.4.1+Release+Notes > > > > > > > > > > > > >>>>>>>>> . > > > > > > > > > > > > >>>>>>>>> 2) Release Candidate: > > > > > > > > > > > > >>>>>>>>> > > > > > > > > > > > > >>> > > > > > > > > > > https://github.com/apache/incubator-mxnet/releases/tag/1.4.1.rc0 > > > > > > > > > > > > >>>> . > > > > > > > > > > > > >>>>>>>>> 3) Source and signatures on Apache dist > > server: > > > > > > > > > > > > >>>>>>>>> > > > > > > > > > > > > >>>> > > > > > > > > > > > > > https://dist.apache.org/repos/dist/dev/incubator/mxnet/1.4.1.rc0/ > > > > > > > > > > . > > > > > > > > > > > > >>>>>>>>> > > > > > > > > > > > > >>>>>>>>> Please remember to TEST first before voting > > > > > > > accordingly: > > > > > > > > > > > > >>>>>>>>> +1 = approve > > > > > > > > > > > > >>>>>>>>> +0 = no opinion > > > > > > > > > > > > >>>>>>>>> -1 = disapprove (provide reason) > > > > > > > > > > > > >>>>>>>>> > > > > > > > > > > > > >>>>>>>>> Best regards, > > > > > > > > > > > > >>>>>>>>> Junru Shao > > > > > > > > > > > > >>>>>>>>> > > > > > > > > > > > > >>>>> > > > > > > > > > > > > >>>> > > > > > > > > > > > > >>> > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >