Hello:
Can you show me your targets? newt target show will do this. Also, can you
describe the steps you used to build and load the image on the board? There are
different ways to do this but this is what I did:
newt clean nrf52dk_bletiny
newt build nrf52dk_bletiny
newt create-image nrf52dk_bletiny 0.0.0
newt load nrf52dk_bletiny
After that gets loaded you can reset the board and bletiny should boot
(assuming you already have the bootloader downloaded).
I have the latest off develop and I am not seeing the same issue. Here is the
target I am building with (I show the bootloader target as well).
targets/nrf52dk_bletiny
app=apps/bletiny
bsp=hw/bsp/nrf52dk
build_profile=optimized
cflags=-DNIMBLE_OPT_SM=1 -DSTATS_NAME_ENABLE
targets/nrf52dk_boot
app=apps/boot
bsp=hw/bsp/nrf52dk
build_profile=optimized
> On May 5, 2016, at 2:35 PM, Cody Smith <[email protected]> wrote:
>
> Hey Everybody,
>
> I've been working with the nRF52 development board PCA10040 and have had
> some issues running the bletiny example app that comes in the repo. I
> switched to the dev branch of the repo to get the nrf52dk as opposed to the
> nrf52pdk, but that didn't solve this particular issue (although it did fix
> a few things).
>
> I got the example code to build and load onto the board, but when it runs,
> I see the following output printed to the terminal window on my desktop
> (coming over the serial port in Tera Term) continuously.
>
> :Unhandled interrupt (3), exception sp 0x20007fa0
> 0: r0:0x20007fa0 r1:0x200043a0 r2:0x08000000 r3:0x00000100
> 0: r4:0x200043a0 r5:0x08000000 r6:0x00000100 r7:0x200043c0
> 0: r8:0xffffffff r9:0x00016047 r10:0x00000501 r11:0x00000000
> 0:r12:0x200043c0 lr:0xffffffff pc:0x00016047 psr:0x00000501
> 0:ICSR:0x00000803 HFSR:0x40000000 CFSR:0x00008200
> 0:BFAR:0x08000000 MMFAR:0x08000000
>
> The blinky app was running just fine. I also see this same thing with the
> bletest app as well. Any ideas on what this could be?
>
> Thanks for the help,
>
> Cody
