Hi Chris, On Thu, Mar 16, 2017 at 2:30 PM, Christopher Collins <[email protected]> wrote:
> Hi Pritish, > > On Thu, Mar 16, 2017 at 01:50:12PM -0700, Pritish Gandhi wrote: > > Hi All, > > I'm trying to run blecent on an nrf52dk and am running the bleprph > > application on another BLE module (stm32f4discovery talking to a broadcom > > BLE core). Anyways, when try to run blecent it seems like I successfully > > connect to the peripheral and are able to discover it, however after that > > the connection seems to be timing out and then am never able to discover > > the peripheral again. > > [...] > > Hmm, that is odd, indeed. The disconnect reason codes you are seeing > are mapped as follows: > > 546 - LMP RESPONSE TIMEOUT / LL RESPONSE TIMEOUT > 520 - CONNECTION TIMEOUT > > I'm afraid I don't have any ideas at the moment. Could you please > clarify the setup you are using? Here is my understanding: > > Device A: blecent on nRF52dk (combined host-controller) > Device B: > * bleprph on stm32f4discovery (host-only) > * broadcom controller > > Is that correct? If so, I assume the host and controller on device B > communicate via UART? > > Yes that's absolutely correct. I'm building the nimble library with UART transport and running it on the stm32f4discovery. It works pretty well running bleprph on it actually. I'm able to connect to it using an the LightBlue App and it works well. I've only seen issues in which the peripheral seems to get disconnected every 30s or so. I can't seem to keep it connected for much longer than that. Thanks for your help, Pritish Thanks, > Chris > > > > > 1) Connected and Discovered the bleprph: > > > > 37493:[ts=292914004ssb, mod=4 level=1] GAP procedure initiated: > discovery; > > own_addr_type=0 filter_policy=0 passive=1 limited=0 filter_duplicates=1 > > duration=forever > > > > 37503:[ts=292992124ssb, mod=4 level=1] GAP procedure initiated: connect; > > peer_addr_type=0 peer_addr=aa:aa:aa:aa:aa:aa scan_itvl=16 scan_window=16 > > itvl_min=24 itvl_max=40 latency=0 supervision_timeout=256 min_ce_len=16 > > max_ce_len=768 own_addr_ty > > > > 37517:[ts=293101556ssb, mod=64 level=1] Connection established > > > > 37519:[ts=293117180ssb, mod=4 level=1] GATT procedure initiated: discover > > all services > > > > 37588:[ts=293656208ssb, mod=4 level=1] GATT procedure initiated: discover > > all characteristics; start_handle=1 end_handle=11 > > > > 37627:[ts=293960876ssb, mod=4 level=1] GATT procedure initiated: discover > > all characteristics; start_handle=12 end_handle=15 > > > > 37658:[ts=294203112ssb, mod=4 level=1] GATT procedure initiated: discover > > all characteristics; start_handle=16 end_handle=19 > > > > 37684:[ts=294406224ssb, mod=4 level=1] GATT procedure initiated: discover > > all characteristics; start_handle=20 end_handle=32 > > > > 37722:[ts=294703080ssb, mod=4 level=1] GATT procedure initiated: discover > > all characteristics; start_handle=33 end_handle=65535 > > > > 37761:[ts=295007812ssb, mod=4 level=1] GATT procedure initiated: discover > > all descriptors; chr_val_handle=14 end_handle=15 > > > > 37774:[ts=295109368ssb, mod=4 level=1] GATT procedure initiated: discover > > all descriptors; chr_val_handle=18 end_handle=19 > > > > 37786:[ts=295203112ssb, mod=4 level=1] GATT procedure initiated: discover > > all descriptors; chr_val_handle=24 end_handle=25 > > > > 37799:[ts=295304668ssb, mod=4 level=1] GATT procedure initiated: discover > > all descriptors; chr_val_handle=29 end_handle=30 > > > > 37812:[ts=295406224ssb, mod=4 level=1] GATT procedure initiated: discover > > all descriptors; chr_val_handle=37 end_handle=65535 > > > > 37825:[ts=295507780ssb, mod=64 level=3] Service discovery complete; > > status=0 conn_handle=1 > > > > 2) Read/Write/Subscribe for notifications. Finally fails with reason=546 > > > > 37827:[ts=295523404ssb, mod=4 level=1] GATT procedure initiated: read; > > att_handle=22 > > > > 37829:[ts=295539028ssb, mod=4 level=1] GATT procedure initiated: write; > > att_handle=32 len=2 > > > > 37832:[ts=295562464ssb, mod=4 level=1] GATT procedure initiated: write; > > att_handle=30 len=2 > > > > 37851:[ts=295710892ssb, mod=64 level=1] Read complete; status=0 > > conn_handle=1 attr_handle=22 value= > > > > 37857:[ts=295757764ssb, mod=64 level=1] Write complete; status=0 > > conn_handle=1 attr_handle=32 > > > > 37863:[ts=295804636ssb, mod=64 level=1] Subscribe complete; status=0 > > conn_handle=1 attr_handle=30 > > > > 42637:[ts=333101556ssb, mod=64 level=1] disconnect; reason=546 > > > > > > 3) Once it disconnects, blecent gets stuck in this loop of trying to > > discover, but the discovery always fails: > > > > 42638:[ts=333109368ssb, mod=4 level=1] GAP procedure initiated: > discovery; > > own_addr_type=0 filter_policy=0 passive=1 limited=0 filter_duplicates=1 > > duration=forever > > > > 42973:[ts=335726516ssb, mod=4 level=1] GAP procedure initiated: connect; > > peer_addr_type=0 peer_addr=aa:aa:aa:aa:aa:aa scan_itvl=16 scan_window=16 > > itvl_min=24 itvl_max=40 latency=0 supervision_timeout=256 min_ce_len=16 > > max_ce_len=768 own_addr_ty > > > > 42982:[ts=335796824ssb, mod=64 level=1] Connection established > > > > 42983:[ts=335804636ssb, mod=4 level=1] GATT procedure initiated: discover > > all services > > > > 43020:[ts=336093744ssb, mod=64 level=3] Error: Service discovery failed; > > status=7 conn_handle=1 > > > > 43022:[ts=336109368ssb, mod=4 level=1] GAP procedure initiated: terminate > > connection; conn_handle=1 hci_reason=19 > > > > 43025:[ts=336132804ssb, mod=64 level=1] disconnect; reason=520 > > > > 43027:[ts=336148428ssb, mod=4 level=1] GAP procedure initiated: > discovery; > > own_addr_type=0 filter_policy=0 passive=1 limited=0 filter_duplicates=1 > > duration=forever > > > > 43038:[ts=336234360ssb, mod=4 level=1] GAP procedure initiated: connect; > > peer_addr_type=0 peer_addr=aa:aa:aa:aa:aa:aa scan_itvl=16 scan_window=16 > > itvl_min=24 itvl_max=40 latency=0 supervision_timeout=256 min_ce_len=16 > > max_ce_len=768 own_addr_ty > > > > 43046:[ts=336296856ssb, mod=64 level=1] Connection established > > > > 43047:[ts=336304668ssb, mod=4 level=1] GATT procedure initiated: discover > > all services > > > > 43084:[ts=336593712ssb, mod=64 level=3] Error: Service discovery failed; > > status=7 conn_handle=1 > > > > 43086:[ts=336609336ssb, mod=4 level=1] GAP procedure initiated: terminate > > connection; conn_handle=1 hci_reason=19 > > > > 43089:[ts=336632772ssb, mod=64 level=1] disconnect; reason=520 > > > > 43091:[ts=336648396ssb, mod=4 level=1] GAP procedure initiated: > discovery; > > own_addr_type=0 filter_policy=0 passive=1 limited=0 filter_duplicates=1 > > duration=forever > > > > 43101:[ts=336726516ssb, mod=4 level=1] GAP procedure initiated: connect; > > peer_addr_type=0 peer_addr=aa:aa:aa:aa:aa:aa scan_itvl=16 scan_window=16 > > itvl_min=24 itvl_max=40 latency=0 supervision_timeout=256 min_ce_len=16 > > max_ce_len=768 own_addr_ty > > > > Any ideas whats going on and how to debug this further? > > The only way to recover seems to be to reset my bleprph device. > > Appreciate the help, > > Pritish >
