Thanks. Will do this. -adam
On Thu, Feb 27, 2020 at 5:13 PM Gregory Nutt <spudan...@gmail.com> wrote: > > Thanks, will check that again. I used the Flexcoms that are labeled on > the > > board itself (Flexcom 0, 3, and 4) and looked at the pinouts. I also used > > the debug UART1 that works with U-Boot and Linux... > Not good enough. you also have to set the pin multiplexing in the > board.h header file. You have to match the physical pin with the logic > pin uses. Look at arch/arm/src/sama5/hardware/_sama5d2x_pinmap.h There > are multiple options for each logical pin mapping. You have to assure > the logical pin matches the physical pin used in the board schematic. > > > -- Adam Feuer <a...@starcat.io>
