Hi, 1. In the NuttX Pre-check flow, docker image is built from "Pre-built Toolchain" of each architecture. If the pre-built toolchain is not available, can we build the toolchain from "Toolchain Source Code" in the Dockerfile of incubator-nuttx-testing repo?
2. The Pre-check build treats all warnings as error (Extra Flags: "-Werror"). Can we perform Pre-check build with warnings for a particular architecture in a new testlist? (Extra Flags: "-w") Note: Fix for the warnings shall be done at the later stage, since the fix has to be checked for all the boards in the architecture. Best Regards Ramya N ________________________________ Disclaimer: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient of this message , or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibited. Email transmission cannot be guaranteed to be secure or error-free, as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender, therefore, does not accept liability for any errors, omissions or contaminations in the contents of this message which might have occurred as a result of email transmission. If verification is required, please request for a hard-copy version. ________________________________
