Support for ethernet has not been ported to that platform unfortunately, so it is much more than turning on some kconfig options.
If you want to use a platform with ethernet support I would look for one with a netnsh configuration. --Brennan On Mon, Oct 26, 2020, 8:48 AM Subhra Sankha Sarkar <rurtle.co...@gmail.com> wrote: > Hello all, > > I just got started with NuttX and was able to build (using the default > beaglebone-black:nsh configuration) & run the OS on my Beaglebone Black > (BBB). However, when I checked for the list of commands available on it, I > am only seeing a limited subset of what NuttX offers. > > > -------------------------------------------------------------------------------- > NuttShell (NSH) NuttX-9.1.0 > nsh> ? > help usage: help [-v] [<cmd>] > > . cat echo hexdump mkfatfs mw source > umount > [ cp exec kill mkrd rm test > unset > ? cmp exit ls mh rmdir time > usleep > basename dirname false mb mount set true xd > > break dd help mkdir mv sleep uname > > Builtin Apps: > sh nsh > nsh> > > -------------------------------------------------------------------------------- > > In particular, I am interested in the ifconfig command. However, just > setting CONFIG_NET=y and CONFIG_FS_PROCFS=y (per nshlib README) results in > build failure. Obviously, I'll have to enable a few other CONFIG options > through Kconfig. The board specific README file didn't provide much detail > on this matter. > > Could someone please provide me with some pointers or a list of configs to > enable so I can run the ifconfig (or other networking commands) on my BBB? > > Thank you in advance. > > Sincerely, > Subhra Sankha Sarkar >
