El dom, 17 ene 2021 a las 9:10, Flavio Castro Alves Filho (< flavio.al...@gmail.com>) escribió:
> Thank you very much for your fast response. > > I checked the boot calls and they are the same, regarding USB > initialization. > > I compared the include/nuttx/config.h files too ... at least regarding > USB, I couldn't see anything critical. > That means problem is in a dependency and not exactly USB > > > The development approach that I am working was exactly starting with > stm32discovery board and increasing features. Maybe I have to restart, > checking first the USB. > Have you tried starting from original, working config and adding and testing after _every single_ change? If you're changing OS elements, maybe one of them is affecting USB without you knowing Testing at every change is tedious but sometimes the only possible technique > > Best regards, > > Flavio > > Em dom., 17 de jan. de 2021 às 11:39, Grr <gebbe...@gmail.com> escreveu: > > > > What you can do is compare .config generated from that defconfig to > .config > > generated from "./tools/configure.sh -l stm32f4discovery:usbnsh" and see > > the differences. You can also compare include/nuttx/config.h from both > > configs > > > > Another approach is to start from discovery config and do the > modifications > > for your board. After you have it working, clone the config to a > different > > board name. With "make savedefconfig" you can save your working defconfig > > > > El dom, 17 ene 2021 a las 7:51, Flavio Castro Alves Filho (< > > flavio.al...@gmail.com>) escribió: > > > > > As an additional information, if I load the STM32F4DISCO on my board, > USB > > > works. > > > > > > Em dom., 17 de jan. de 2021 às 10:43, Flavio Castro Alves Filho > > > <flavio.al...@gmail.com> escreveu: > > > > > > > > Hello, > > > > > > > > I am working to port NuttX on a board based on STM32F4DISCOVERY. The > > > > microcontroller is the STM32F407VET6. > > > > > > > > USB CDC support is not initializing. > > > > > > > > When I plug the USB on the board, I have the following dmesg > response in > > > Linux: > > > > > > > > [517062.075048] usb usb1-port2: attempt power cycle > > > > [517062.726922] usb 1-2: new full-speed USB device number 47 using > > > xhci_hcd > > > > [517062.727170] usb 1-2: Device not responding to setup address. > > > > [517062.935148] usb 1-2: Device not responding to setup address. > > > > [517063.142906] usb 1-2: device not accepting address 47, error -71 > > > > [517063.270916] usb 1-2: new full-speed USB device number 48 using > > > xhci_hcd > > > > [517063.271141] usb 1-2: Device not responding to setup address. > > > > [517063.479134] usb 1-2: Device not responding to setup address. > > > > > > > > When I run stm32f4discovery:usbnsh on my discovery board, it works. > > > > > > > > I compared the defconfig from the base project and from mine and I > > > > believe I have initialized everything that is related to the USB. > > > > > > > > Here is the defconfig for my board: > > > > > > > > # > > > > # This file is autogenerated: PLEASE DO NOT EDIT IT. > > > > # > > > > # You can use "make menuconfig" to make any modifications to the > > > > installed .config file. > > > > # You can then do "make savedefconfig" to generate a new defconfig > > > > file that includes your > > > > # modifications. > > > > # > > > > # CONFIG_ARCH_FPU is not set > > > > # CONFIG_MMCSD_MMCSUPPORT is not set > > > > # CONFIG_MMCSD_SPI is not set > > > > # CONFIG_NSH_ARGCAT is not set > > > > # CONFIG_NSH_CMDOPT_HEXDUMP is not set > > > > # CONFIG_NSH_CMDPARMS is not set > > > > CONFIG_ADC=y > > > > CONFIG_ANALOG=y > > > > CONFIG_ARCH="arm" > > > > CONFIG_ARCH_BOARD="phi-innovations" > > > > CONFIG_ARCH_BOARD_STM32F4_PHI_IOT_GATEWAY=y > > > > CONFIG_ARCH_CHIP="stm32" > > > > CONFIG_ARCH_CHIP_STM32=y > > > > CONFIG_ARCH_CHIP_STM32F407VG=y > > > > CONFIG_ARCH_STACKDUMP=y > > > > CONFIG_ARMV7M_MEMCPY=y > > > > CONFIG_BOARDCTL_RESET=y > > > > CONFIG_BOARDCTL_UNIQUEID=y > > > > CONFIG_BOARDCTL_USBDEVCTRL=y > > > > CONFIG_BOARD_LOOPSPERMSEC=16717 > > > > CONFIG_BUILTIN=y > > > > CONFIG_CDCACM=y > > > > CONFIG_CDCACM_CONSOLE=y > > > > CONFIG_CDCACM_RXBUFSIZE=256 > > > > CONFIG_CDCACM_TXBUFSIZE=256 > > > > CONFIG_CLOCK_MONOTONIC=y > > > > CONFIG_CONSOLE_SYSLOG=y > > > > CONFIG_DEBUG_ASSERTIONS=y > > > > CONFIG_DEBUG_DMA=y > > > > CONFIG_DEBUG_DMA_ERROR=y > > > > CONFIG_DEBUG_DMA_INFO=y > > > > CONFIG_DEBUG_DMA_WARN=y > > > > CONFIG_DEBUG_ERROR=y > > > > CONFIG_DEBUG_FEATURES=y > > > > CONFIG_DEBUG_FS=y > > > > CONFIG_DEBUG_FS_ERROR=y > > > > CONFIG_DEBUG_FS_WARN=y > > > > CONFIG_DEBUG_FULLOPT=y > > > > CONFIG_DEBUG_HARDFAULT_ALERT=y > > > > CONFIG_DEBUG_INFO=y > > > > CONFIG_DEBUG_NET=y > > > > CONFIG_DEBUG_NET_ERROR=y > > > > CONFIG_DEBUG_NET_INFO=y > > > > CONFIG_DEBUG_NET_WARN=y > > > > CONFIG_DEBUG_RTC=y > > > > CONFIG_DEBUG_RTC_ERROR=y > > > > CONFIG_DEBUG_RTC_INFO=y > > > > CONFIG_DEBUG_RTC_WARN=y > > > > CONFIG_DEBUG_SYMBOLS=y > > > > CONFIG_DEBUG_WARN=y > > > > CONFIG_DEV_GPIO=y > > > > CONFIG_ETH0_PHY_LAN8742A=y > > > > CONFIG_EXAMPLES_PPPD=y > > > > CONFIG_FAT_LCNAMES=y > > > > CONFIG_FAT_LFN=y > > > > CONFIG_FS_FAT=y > > > > CONFIG_FS_PROCFS=y > > > > CONFIG_FS_SMARTFS=y > > > > CONFIG_HAVE_CXX=y > > > > CONFIG_HAVE_CXXINITIALIZE=y > > > > CONFIG_HEAP_COLORATION=y > > > > CONFIG_IDLETHREAD_STACKSIZE=2048 > > > > CONFIG_INTELHEX_BINARY=y > > > > CONFIG_IOEXPANDER=y > > > > CONFIG_LIB_HOSTNAME="STM32F4-Discovery" > > > > CONFIG_MAX_TASKS=16 > > > > CONFIG_MMCSD=y > > > > CONFIG_MMCSD_MULTIBLOCK_DISABLE=y > > > > CONFIG_MMCSD_SDIO=y > > > > CONFIG_MTD=y > > > > CONFIG_MTD_MX25L=y > > > > CONFIG_MTD_SMART=y > > > > CONFIG_MTD_SMART_FSCK=y > > > > CONFIG_MX25L_SPIFREQUENCY=21000000 > > > > CONFIG_NET=y > > > > CONFIG_NETDB_DNSCLIENT=y > > > > CONFIG_NETINIT_DEBUG=y > > > > CONFIG_NETINIT_DHCPC=y > > > > CONFIG_NETINIT_DNS=y > > > > CONFIG_NETINIT_DNSIPADDR=0x08080808 > > > > CONFIG_NETINIT_DRIPADDR=0x0a010101 > > > > CONFIG_NETINIT_NOMAC=y > > > > CONFIG_NETINIT_THREAD=y > > > > CONFIG_NETUTILS_DHCPC=y > > > > CONFIG_NETUTILS_NETCAT=y > > > > CONFIG_NETUTILS_PPPD_PAP=y > > > > CONFIG_NET_ARP_DUMP=y > > > > CONFIG_NET_ARP_SEND=y > > > > CONFIG_NET_BROADCAST=y > > > > CONFIG_NET_ETH_PKTSIZE=1294 > > > > CONFIG_NET_ICMP=y > > > > CONFIG_NET_ICMP_SOCKET=y > > > > CONFIG_NET_SOCKOPTS=y > > > > CONFIG_NET_SOLINGER=y > > > > CONFIG_NET_STATISTICS=y > > > > CONFIG_NET_TCP=y > > > > CONFIG_NET_TCPBACKLOG=y > > > > CONFIG_NET_TCPURGDATA=y > > > > CONFIG_NET_TCP_KEEPALIVE=y > > > > CONFIG_NET_TCP_WRITE_BUFFERS=y > > > > CONFIG_NET_UDP=y > > > > CONFIG_NET_UDP_CHECKSUMS=y > > > > CONFIG_NFILE_DESCRIPTORS=8 > > > > CONFIG_NSH_ARCHINIT=y > > > > CONFIG_NSH_BUILTIN_APPS=y > > > > CONFIG_NSH_DISABLE_LOSMART=y > > > > CONFIG_NSH_FILEIOSIZE=512 > > > > CONFIG_NSH_LINELEN=64 > > > > CONFIG_NSH_PROMPT_STRING="nsh$ " > > > > CONFIG_NSH_READLINE=y > > > > CONFIG_PREALLOC_TIMERS=4 > > > > CONFIG_RAM_SIZE=114688 > > > > CONFIG_RAM_START=0x20000000 > > > > CONFIG_RAW_BINARY=y > > > > CONFIG_RR_INTERVAL=200 > > > > CONFIG_RTC=y > > > > CONFIG_RTC_EXTERNAL=y > > > > CONFIG_RTC_PCF8563=y > > > > CONFIG_SCHED_HPWORK=y > > > > CONFIG_SCHED_HPWORKPRIORITY=192 > > > > CONFIG_SCHED_WAITPID=y > > > > CONFIG_SDCLONE_DISABLE=y > > > > CONFIG_STACK_COLORATION=y > > > > CONFIG_START_DAY=13 > > > > CONFIG_START_MONTH=9 > > > > CONFIG_START_YEAR=2014 > > > > CONFIG_STM32F4DISBB=y > > > > CONFIG_STM32_ADC1=y > > > > CONFIG_STM32_DMA1=y > > > > CONFIG_STM32_DMA2=y > > > > CONFIG_STM32_DMACAPABLE=y > > > > CONFIG_STM32_ETHMAC=y > > > > CONFIG_STM32_I2C1=y > > > > CONFIG_STM32_JTAG_SW_ENABLE=y > > > > CONFIG_STM32_OTGFS=y > > > > CONFIG_STM32_PHYADDR=0 > > > > CONFIG_STM32_PHYSR=31 > > > > CONFIG_STM32_PHYSR_100FD=0x0018 > > > > CONFIG_STM32_PHYSR_100HD=0x0008 > > > > CONFIG_STM32_PHYSR_10FD=0x0014 > > > > CONFIG_STM32_PHYSR_10HD=0x0004 > > > > CONFIG_STM32_PHYSR_ALTCONFIG=y > > > > CONFIG_STM32_PHYSR_ALTMODE=0x001c > > > > CONFIG_STM32_PWR=y > > > > CONFIG_STM32_RMII_EXTCLK=y > > > > CONFIG_STM32_SDIO=y > > > > CONFIG_STM32_SPI1=y > > > > CONFIG_STM32_USART1=y > > > > CONFIG_STM32_USART2=y > > > > CONFIG_STM32_USART3=y > > > > CONFIG_STM32_USART6=y > > > > CONFIG_SYSTEM_NSH=y > > > > CONFIG_SYSTEM_PING=y > > > > CONFIG_USART2_IFLOWCONTROL=y > > > > CONFIG_USART2_OFLOWCONTROL=y > > > > CONFIG_USART3_RS485=y > > > > CONFIG_USART6_RXBUFSIZE=64 > > > > CONFIG_USART6_TXBUFSIZE=64 > > > > CONFIG_USBDEV=y > > > > CONFIG_USER_ENTRYPOINT="nsh_main" > > > > > > > > I believe that there is something missing or wrong in my > > > > configuration, but I couldn't find what it is. > > > > > > > > Can anybody give me some advice on how to solve this issue? > > > > > > > > Best regards, > > > > > > > > Flavio > > > > > > > > > > > > -- > > > > Flavio de Castro Alves Filho > > > > > > > > flavio.al...@gmail.com > > > > Twitter: http://twitter.com/#!/fraviofii > > > > LinkedIn profile: www.linkedin.com/in/flaviocastroalves > > > > > > > > > > > > -- > > > Flavio de Castro Alves Filho > > > > > > flavio.al...@gmail.com > > > Twitter: http://twitter.com/#!/fraviofii > > > LinkedIn profile: www.linkedin.com/in/flaviocastroalves > > > > > > > -- > Flavio de Castro Alves Filho > > flavio.al...@gmail.com > Twitter: http://twitter.com/#!/fraviofii > LinkedIn profile: www.linkedin.com/in/flaviocastroalves >
