Hello Alan, I tried but no success.
No problem. For now, I will let like that and later use the firmware function to confirm if it is working or not. I am working on a bring-up. So, for this moment, I am trying to avoid looking too much on the firmware. I will do that when the peripherals are all running. Best regards, Flavio -----Mensagem original----- De: Alan Carvalho de Assis <acas...@gmail.com> Enviada em: terça-feira, 19 de janeiro de 2021 18:24 Para: dev@nuttx.apache.org Assunto: Re: dmesg return is empty Try to enable the FS or SCHED Error, Warning and Info, it should work to let you see some message on RAMLOG, like suggested in the wiki page. BR, Alan On 1/19/21, Flavio Castro Alves Filho <flavio.al...@gmail.com> wrote: > Hello Alan, > > I don't think so. > > Which DEBUG functions should I enable to see the messages? > > Thank you for your fast response. > > Best regards, > > Flavio > > Em ter., 19 de jan. de 2021 às 17:06, Alan Carvalho de Assis > <acas...@gmail.com> escreveu: >> >> Hi Flavio, >> >> Did you enable DEBUG functions related to the subsystem you want to >> monitor? >> >> Also you can test using syslog() function in your board >> initialization code just to see if what you try to print appears when >> you call dmesg command. >> >> BR, >> >> Alan >> >> On 1/19/21, Flavio Castro Alves Filho <flavio.al...@gmail.com> wrote: >> > Hello, >> > >> > I installed dmesg (ramlog) support on my system and when I run it >> > on nuttshell I have an empty response. >> > >> > I am using NuttX release 10 >> > My board is stm32f4discovery >> > My configuration is nsh, with the adaption for USB according to the >> > video (https://www.youtube.com/watch?v=5BznGFvodmg) >> > I have just set CONFIG_RAMLOG and its integration with SYSLOG. >> > >> > I have also followed the instruction from the wiki: >> > https://cwiki.apache.org/confluence/display/NUTTX/Logging+to+a+RAM+ >> > Buffer >> > >> > Is there any missing information or configuration? >> > >> > Do we have initialization messages displayed on syslog? (I think >> > so, because when I don't use USB console I can see some messages on >> > the >> > serial) >> > >> > What is missing to enable ramlog on my Nuttx? >> > >> > Best regards, >> > >> > Flavio >> > >> > Note: the Youtube video for this subject >> > (https://www.youtube.com/watch?v=A2kyHctm9YM) didn't work for me. >> > It didn't build. >> > Note2: to make USB console working correctly, I applied manually >> > the following pull request: >> > https://github.com/apache/incubator-nuttx-apps/pull/521 >> > >> > -- >> > Flavio de Castro Alves Filho >> > >> > flavio.al...@gmail.com >> > Twitter: http://twitter.com/#!/fraviofii LinkedIn profile: >> > www.linkedin.com/in/flaviocastroalves >> > > > > > -- > Flavio de Castro Alves Filho > > flavio.al...@gmail.com > Twitter: http://twitter.com/#!/fraviofii LinkedIn profile: > www.linkedin.com/in/flaviocastroalves >
