Hello Simon and others, On Friday 13 of August 2021 18:50:23 Frank-Christian Kruegel wrote: > Am 13.08.2021 um 16:50 schrieb Simon Filgis: > > has anybody implemented a LIN driver for SAME70 USART? The SAME70 USART > > peripheral is capable of. A SW implementation (sllin.c - Pavel Pisa) > > would also be interesting! > > > > Would you extend sma_lowputc.c and sam_serial.c or would you grep USARTx > > in a separate file? > > Do you need LIN Master or LIN Slave? > > LIN Master is easy. It's standard serial. ... > LIN slave is much more complex, especially if you want to do autobauding > by measuring the SYNC byte after the break. You might end up with a > custom serial driver then. If a fixed bitrate is enough the only problem > is detecting the BREAK signal. A received break signal is basically a 0 > byte with a framing error added. You only need to detect and clear the > framing error.
I am on the way to vacations now but I am interest in LIN interfacing discussion when I return. I do not have actual need for LIN support but getting some reasonable code upstream to NuttX and Linux. There is my latest version from 2019 https://github.com/ppisa/linux-lin and some docs https://github.com/ppisa/linux-lin/wiki Finite state machines and some other ideas from Linux kernel implementation can be reused on NuttX. As for the API, I think that to keep size of the applications low on the targets which do not use TCP or SocketCAN, NuttX API should be implemented through read, write (enough for the master) and IOCTLs to maintain slave responses cache. As for bitrate autodetection, there are special HW support in many UARTs for autodetect of the LIN bitrate. It would worth to add mechanism to setup it o NuttX. On GNU/Linux where sllin attempts to be compatible with all UARTs through generic API it is problematic. On NuttX we can define API, which can allow to implement LIN specific low level drivers for chips with special support ad for other map the API to generic UART low level part. Or we can conditionally extend low level API. By the way I return on Sunday August 22. It would be great if prof. Roberto Bucher's and followup Michal Lenc's presentation about PySimCoder on NuttX Workshop can be scheduled on Sunday that I can attend them. Best wishes Pavel -- Pavel Pisa phone: +420 603531357 e-mail: p...@cmp.felk.cvut.cz Department of Control Engineering FEE CVUT Karlovo namesti 13, 121 35, Prague 2 university: http://dce.fel.cvut.cz/ personal: http://cmp.felk.cvut.cz/~pisa projects: https://www.openhub.net/accounts/ppisa CAN related:http://canbus.pages.fel.cvut.cz/ company: https://www.pikron.com/
