I forgot to copy the mailing list, it could help other users in the future.
BR, Alan On 11/21/21, Alan Carvalho de Assis <acas...@gmail.com> wrote: > Hi Lukas, > > I just tested here using the usbnsh: > > ./tools/configure.sh raspberrypi-pico:usbnsh > > After compiled I copied the nuttx.uf2 to the rasp pico disk and opened > the /dev/ttyACM0, then after pressing ENTER three times the NSH> show > up: > > NuttShell (NSH) NuttX-10.2.0-RC0 > nsh> uname -a > NuttX 10.2.0-RC0 de4bd994f5 Nov 21 2021 18:32:45 arm raspberrypi-pico > nsh> > > Probably you are using the incorrect pins when using the serial to get > the default nsh, it is very common to happen, users mess with pins and > TXD/RXD all the time. > > BR, > > Alan > > On 11/21/21, Lukáš Málek <malek.l...@gmail.com> wrote: >> Hi Alan, >> >> Thank you for your time and a prompt reply. I followed your steps, and >> the make command is working as expected. Unfortunately, after uploading >> the uf2 file to the Qt Py RP2040, nothing happens. The serial port is >> not responding at all. I have tried two more versions of the pico-sdk >> library, the compilation was good. Still, after compiling, I had the >> same problem. Do you have any ideas about what could be wrong? The >> communication with the serial port should work the same as with >> raspberry pi pico, so the problem should be reproducible. >> >> Have a nice day! >> >> Best regards, >> Lukas M >> >> >> On 21/11/2021 20:15, Alan Carvalho de Assis wrote: >>> Did it work for you? >>> >>> On 11/20/21, Alan Carvalho de Assis <acas...@gmail.com> wrote: >>>> Hi Lukas, >>>> >>>> I just installed Ubuntu 21.04 and followed the README.txt and >>>> duplicated your issue: >>>> >>>> $ sudo apt-get install automake bison build-essential flex >>>> gcc-arm-none-eabi gperf git libncurses5-dev libtool libusb-dev >>>> libusb-1.0.0-dev pkg-config git >>>> >>>> $ git clone -b master https://github.com/raspberrypi/pico-sdk.git >>>> >>>> $ sudo mkdir /opt/rasp_pico >>>> >>>> $ sudo mv pico-sdk /opt/rasp_pico/ >>>> >>>> $ export PICO_SDK_PATH=/opt/rasp_pico/pico-sdk >>>> >>>> $ git clone https://github.com/apache/incubator-nuttx.git nuttx >>>> >>>> $ git clone https://github.com/apache/incubator-nuttx-apps.git apps >>>> >>>> $ make distclean >>>> NuttX has not been configured! >>>> To configure the project: >>>> tools/configure.sh <config> >>>> For a list of available configurations: >>>> tools/configure.sh -L >>>> >>>> $ ./tools/configure.sh raspberrypi-pico:nsh >>>> >>>> $ make >>>> ... >>>> >>>> arm-none-eabi-gcc -nostartfiles -nodefaultlibs >>>> -T/tmp/nuttx/boards/arm/rp2040/raspberrypi-pico/scripts/raspberrypi-pico-flash.ld >>>> -DPICO_BOARD=\"pico\" -DPICO_BUILD=1 -DPICO_NO_HARDWARE=0 >>>> -DPICO_ON_DEVICE=1 -Ichip/boot2 >>>> -I/opt/rasp_pico/pico-sdk/src/rp2_common/boot_stage2/asminclude >>>> -I/opt/rasp_pico/pico-sdk/src/rp2040/hardware_regs/include >>>> -I/opt/rasp_pico/pico-sdk/src/rp2_common/hardware_base/include >>>> -I/opt/rasp_pico/pico-sdk/src/common/pico_base/include >>>> -I/opt/rasp_pico/pico-sdk/src/boards/include >>>> -I/opt/rasp_pico/pico-sdk/src/rp2_common/pico_platform/include -o >>>> rp2040_boot_stage2.elf >>>> /opt/rasp_pico/pico-sdk/src/rp2_common/boot_stage2/boot2_w25q080.S >>>> In file included from >>>> /opt/rasp_pico/pico-sdk/src/rp2_common/pico_platform/include/pico/asm_helper.S:7, >>>> from >>>> /opt/rasp_pico/pico-sdk/src/rp2_common/boot_stage2/boot2_w25q080.S:29: >>>> /opt/rasp_pico/pico-sdk/src/common/pico_base/include/pico.h:20:10: >>>> fatal error: pico/version.h: No such file or directory >>>> 20 | #include "pico/version.h" >>>> | ^~~~~~~~~~~~~~~~ >>>> compilation terminated. >>>> make[2]: *** [chip/boot2/Make.defs:49: rp2040_boot_stage2.elf] Error 1 >>>> make[2]: Leaving directory '/tmp/nuttx/arch/arm/src' >>>> make[1]: *** [Makefile:188: .depend] Error 2 >>>> make[1]: Leaving directory '/tmp/nuttx/arch/arm/src' >>>> make: *** [tools/Makefile.unix:494: pass2dep] Error 2 >>>> >>>> >>>> I think there is some issue on their current repository because >>>> version.h doesn't exist, it should be generated using cmake. >>>> >>>> Note it still referenced in their documentation: >>>> https://raspberrypi.github.io/pico-sdk-doxygen/pico_8h_source.html >>>> >>>> I suggest you to return to the older version until we understand how >>>> the new SDK work and modify NuttX to adapt to it. >>>> >>>> I fixed is here this way: >>>> >>>> $ cd /opt/rasp_pico/pico-sdk >>>> >>>> $ git reset --hard 26653ea81e340 >>>> >>>> BR, >>>> >>>> Alan >>>> >>>> On 11/20/21, Lukáš Málek <malek.l...@gmail.com> wrote: >>>>> Dear Sir/Madam, >>>>> >>>>> I have been struggling for more than three days with building nuttx >>>>> for >>>>> Raspberry Pi Pico. I follow the guide Getting started. At the >>>>> compilation, I run the following commands to compile the Nuttx. >>>>> >>>>> /$git clone -b master https://github.com/raspberrypi/pico-sdk.git// >>>>> //$export PICO_SDK_PATH="<abs_path_to_pico-sdk>"// >>>>> //$cd nuttx// >>>>> //$./tools/configure.sh -l raspberrypi-pico:nsh// >>>>> //$make/ >>>>> >>>>> Unfortunately, after making it, I got an error. >>>>> /File pico/version.h can't be found/ >>>>> >>>>> At pico-SDK, I can see a file version.h.ini, so I rename it to >>>>> version.h, but after that, I got an error message that >>>>> /File "pico/config_autogen.h" can't be found/ >>>>> >>>>> This error is the dead-end for me. I have tried to comment the line. >>>>> Also, I created the file that is attached, both resulting in a >>>>> successful build. Unfortunately, the serial port is not working after >>>>> uploading the u2f file to Qt Py RP2040 (Based on Raspberry Pi Pico). >>>>> In >>>>> Device Manager and Zadig, I can see that nothing is connected to the >>>>> port. Is it possible that during the build, the communication via USB >>>>> is >>>>> not activated? In this case, how can I do that? I have tested the >>>>> serial >>>>> port using CMake and pico-sdk. The communication via serial port >>>>> worked, >>>>> so there must be a problem with the software. >>>>> >>>>> I would be very grateful for any help since I have tried everything, >>>>> but >>>>> nothing worked. My nuttx folder, as well as the pico-SDK library, is >>>>> attached. >>>>> >>>>> Sincerely, >>>>> Lukas Malek >> >
