Hello Jukka, Do you have any steps on how to build or download a docker image that can be used to build that project? It takes me too much time to get build running.
Best regards, Petro чт, 3 бер. 2022 р. о 12:43 Jukka Laitinen <jukka.laiti...@iki.fi> пише: > > And also note that the commit I mentioned is already reverted in nuttx > submodule, so you need to put it back in order to re-produce the issue :) > > > Jukka Laitinen kirjoitti torstai 3. maaliskuuta 2022: > > Hi, sorry about that; you can just remove that submodule, it is not needed > > to re-produce the issue. > > > > - Jukka > > > > Petro Karashchenko kirjoitti torstai 3. maaliskuuta 2022: > > > Hi Jukka, > > > > > > I tried to replicate your case, but failed with: > > > $ git submodule update --init --recursive > > > Cloning into > > > '/home/pkarashchenko/workspace/px4-firmware/boards/ssrc/saluki-v1'... > > > ERROR: Repository not found. > > > fatal: Could not read from remote repository. > > > > > > Please make sure you have the correct access rights > > > and the repository exists. > > > fatal: clone of 'g...@github.com:tiiuae/saluki-v1.git' into submodule > > > path '/home/pkarashchenko/workspace/px4-firmware/boards/ssrc/saluki-v1' > > > failed > > > Failed to clone 'boards/ssrc/saluki-v1'. Retry scheduled > > > Cloning into > > > '/home/pkarashchenko/workspace/px4-firmware/boards/ssrc/saluki-v1'... > > > ERROR: Repository not found. > > > fatal: Could not read from remote repository. > > > > > > Please make sure you have the correct access rights > > > and the repository exists. > > > fatal: clone of 'g...@github.com:tiiuae/saluki-v1.git' into submodule > > > path '/home/pkarashchenko$/workspace/px4-firmware/boards/ssrc/saluki-v1' > > > failed > > > Failed to clone 'boards/ssrc/saluki-v1' a second time, aborting > > > > > > Best regards, > > > Petro > > > > > > чт, 3 бер. 2022 р. о 09:34 Jukka Laitinen <jukka.laiti...@iki.fi> пише: > > > > > > > > Hi, > > > > > > > > Maybe I was jumping in to conclusion and the issue is not the same as > > > > what I had. I was building PX4, which uses CMake build system, so I am > > > > not having any Makefile or Make.defs in my own board directory. Also the > > > > platform is not stm or arm, but risc-v. > > > > > > > > Anyhow, this is the error which I started getting in my build scripts: > > > > > > > > " > > > > > > > > ninja: error: > > > > '../../platforms/nuttx/NuttX/nuttx/arch/risc-v/include/board', needed by > > > > 'NuttX/nuttx_copy.stamp', missing and no known rule to make it > > > > make: *** [Makefile:225: ssrc_icicle_default] Error 1 > > > > " > > > > > > > > My configs are: > > > > > > > > CONFIG_ARCH="risc-v" > > > > CONFIG_ARCH_BOARD_CUSTOM=y > > > > CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config" > > > > CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y > > > > CONFIG_ARCH_BOARD_CUSTOM_NAME="px4" > > > > > > > > One version, where it fails is available publicly in > > > > > > > > https://github.com/tiiuae/px4-firmware/ (nuttx is included as a > > > > submodule) > > > > > > > > Building "make ssrc_icicle_default". The board files are in > > > > boards/ssrc/icicle/nuttx-config and NuttX cloned in > > > > platforms/nuttx/Nuttx/nuttx. > > > > > > > > I didn't yet start looking into it in detail, what goes wrong, just > > > > bisected the nuttx and reverted the commit which broke it for me. I need > > > > to look back later to see how to change the off-tree board config to get > > > > it back online. > > > > > > > > Just noticed that the error is somewhat similar, although coming from > > > > different build env. But in my case it is likely that I need to adapt > > > > the cmake build scripts according to the changes in nuttx. > > > > > > > > -Jukka > > > > > > > > > > > > > > > > On 3.3.2022 9.37, Petro Karashchenko wrote: > > > > > Hello Jukka, > > > > > > > > > > So you experience the same problem as Daniel and reverting the commit > > > > > helps? > > > > > > > > > > Before f77956a227f1db6ecb44eda3814e7b02aa2187a6 there was no way to > > > > > reuse common code from "nuttx/board/...". I'm using a custom board > > > > > based on SAME70 and after > > > > > https://github.com/apache/incubator-nuttx/pull/4981 I found my code > > > > > tree broken. Now the folder structure for "boards/arm/samv7" is the > > > > > same as in "boards/arm/stm32". Here is what I did to get it back > > > > > running: > > > > > 1. Synced "custom-board/scripts/Make.defs" with > > > > > "boards/arm/samv7/same70-xplained/scripts/Make.defs" > > > > > 2. Renamed "custom-board/src/Makefile" to "custom-board/src/Make.defs" > > > > > and synced with "boards/arm/samv7/same70-xplained/src/Make.defs" > > > > > 3. Removed files in my code tree that have exactly the same > > > > > implementation as files from "boards/arm/samv7/common" > > > > > > > > > > It seems like Daniel is hitting the same issue, so I expect that > > > > > renaming Makefile to Make.defs plus setting "BOARD_STM32_COMMON=n" > > > > > should fix the issue without any additional file clean-up. > > > > > Please give me feedback if that helps. > > > > > > > > > > Best regards, > > > > > Petro > > > > > > > > > > чт, 3 бер. 2022 р. о 07:40 Jukka Laitinen <jukka.laiti...@iki.fi> > > > > > пише: > > > > >> HI, > > > > >> > > > > >> Not sure what is the correct way to fix this, but I reverted: > > > > >> > > > > >> " > > > > >> > > > > >> commit f77956a227f1db6ecb44eda3814e7b02aa2187a6 > > > > >> Author: Petro Karashchenko <petro.karashche...@gmail.com> > > > > >> Date: Wed Jan 19 11:16:11 2022 +0200 > > > > >> > > > > >> tools: add option to reuse boards common files for custom > > > > >> boards > > > > >> > > > > >> Signed-off-by: Petro Karashchenko > > > > >> <petro.karashche...@gmail.com> > > > > >> " > > > > >> > > > > >> Petro, what is the proper way to configure this? > > > > >> > > > > >> Thanks, > > > > >> > > > > >> Jukka > > > > >> > > > > >> > > > > >> > > > > >> On 3.3.2022 0.06, Daniel Pereira Carvalho wrote: > > > > >> > > > > >>> Hi guys, > > > > >>> > > > > >>> I am having problems building custom boards outside of the Nuttx > > > > >>> folder > > > > >>> tree. Usually I use the following folder structure. > > > > >>> > > > > >>> |-> apps > > > > >>> |-> my-folder > > > > >>> |-> my-apps > > > > >>> |-> custom-app > > > > >>> |-> my-boards > > > > >>> |-> custom-board > > > > >>> |-> nuttx > > > > >>> > > > > >>> To build my apps I just need to create a symbolic link called > > > > >>> external > > > > >>> inside apps folder. To create a new custom board I start copying a > > > > >>> similar > > > > >>> board (e.g nucleo-g431kb) to my-boards folder and make the > > > > >>> following changes > > > > >>> > > > > >>> *remove from defconfig:* > > > > >>> CONFIG_ARCH_BOARD="nucleo-g431kb" > > > > >>> CONFIG_ARCH_BOARD_NUCLEO_G431KB=y > > > > >>> > > > > >>> *add on defconfig:* > > > > >>> CONFIG_ARCH_BOARD_CUSTOM=y > > > > >>> CONFIG_ARCH_BOARD_CUSTOM_DIR="../my-folder/my-boards/custom-board" > > > > >>> CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y > > > > >>> CONFIG_ARCH_BOARD_CUSTOM_NAME="custom-board" > > > > >>> > > > > >>> *Rename src/Make.defs to src/Makefile and append the line * > > > > >>> include $(TOPDIR)/boards/Board.mk at the end of file. > > > > >>> > > > > >>> This works well for me up to Nuttx version 10.2.0 but now when I > > > > >>> try to > > > > >>> make I got the errors > > > > >>> > > > > >>> make[1]: Entering directory > > > > >>> '/home/daniel/nuttx-workspace/nuttx/tools' > > > > >>> make[1]: Leaving directory > > > > >>> '/home/daniel/nuttx-workspace/nuttx/tools' > > > > >>> make[1]: Entering directory > > > > >>> '/home/daniel/nuttx-workspace/nuttx/tools' > > > > >>> make[1]: Leaving directory > > > > >>> '/home/daniel/nuttx-workspace/nuttx/tools' > > > > >>> Create version.h > > > > >>> make[1]: Entering directory > > > > >>> '/home/daniel/nuttx-workspace/nuttx/boards' > > > > >>> make[2]: Entering directory > > > > >>> '/home/daniel/nuttx-workspace/nuttx/boards/arm/stm32/common' > > > > >>> Makefile:23: board/Make.defs: No such file or directory > > > > >>> make[2]: *** No rule to make target 'board/Make.defs'. Stop. > > > > >>> make[2]: Leaving directory > > > > >>> '/home/daniel/nuttx-workspace/nuttx/boards/arm/stm32/common' > > > > >>> make[1]: *** [Makefile:79: context] Error 2 > > > > >>> make[1]: Leaving directory > > > > >>> '/home/daniel/nuttx-workspace/nuttx/boards' > > > > >>> make: *** [tools/Unix.mk:425: boards/.context] Error 2 > > > > >>> > > > > >>> Does anyone know how to fix this problem? > > > > >>> > > > > >>> Thanks > > > > >>> > > > > >>> Daniel Pereira de Carvalho > > > > >>> > >
