Hi Roberto, I found both boards listed on Digikey:
NUCLEO-H743ZI: https://www.digikey.com/en/products/detail/stmicroelectronics/NUCLEO-H743ZI/7809236 NUCLEO-H743ZI2: https://www.digikey.com/en/products/detail/stmicroelectronics/NUCLEO-H743ZI2/10130892 The ZI board was replaced with ZI2 by ST according with a note here: https://www.st.com/content/ccc/resource/technical/document/data_brief/group1/8c/c9/8a/9b/3e/f0/45/bb/DM00357737/files/DM00357737.pdf/jcr:content/translations/en.DM00357737.pdf Also according with this note ZI uses ST-LINK/V2 and ZI2 uses ST-LINK/V3, I didn't look the schematics to do further comparison. If you do the schematic comparison and realize they are identical, then it should be nice to copy the code from ZI board to ZI2 because ZI was discontinued and users normally will by ZI2. The board ZI has reference code MB1137 and ZI2 has MB1364. BR, Alan On 6/29/22, Roberto Bucher <roberto.buc...@supsi.ch> wrote: > Hi > > What are the main differences between the nucleo-stm32h743zi and the > nucleo-stm32h743zi2 boards? > > I have a stm32743zi2 board but the available files under "boards" for > nucleo-stm32h743zi2 are limited compared to the files available for the > nucleo-stm32h743zi version. > > I need different devices (PWM, ADC, encoder, CAN) and I don't know > exactly if I have to new implement them for the ZI2 version or if it is > possible to work using the ZI version. > > I tried the netnsh configuration of the ZI on my ZI2 board and it works... > > Thanks in advance for any hints > > Roberto > >
