s/Then example/Then enable/
On 3/17/23, Alan C. Assis <acas...@gmail.com> wrote: > Hi Gustavo, > > Enabling all the network needed features on NuttX is very time > consuming, so this is a good idea to start with a working example. > > In this case nsh is not the recommended starting point, but wapi (wifi > board profile). > > Try this sequence: > make distclean > ./tools/configure.sh esp32-devkitc:wapi > > Then example the webserver example. > > BR, > > Alan > > On 3/17/23, Gustavo Soares <gustavo.felipesoa...@hotmail.com> wrote: >> Hi, Petro! >> >> I'm using the latest version of NuttX. >> >> Em sex., 17 de mar. de 2023 01:56, Petro Karashchenko < >> petro.karashche...@gmail.com> escreveu: >> >>> I just tried next steps: >>> >>> 1. tools/configure.sh esp32-devkitc:nsh >>> 2. Additionally enabled via menuconfig: >>> CONFIG_ESP32_EMAC=y >>> CONFIG_ESP32_WIFI=y >>> CONFIG_EXAMPLES_WEBSERVER=y >>> CONFIG_NETUTILS_WEBSERVER=y >>> CONFIG_NET_SOCKOPTS=y >>> CONFIG_NET_TCP=y >>> CONFIG_SCHED_HPWORK=y >>> CONFIG_SCHED_LPWORK=y >>> CONFIG_TLS_TASK_NELEM=1 >>> 3. make -j8 >>> >>> The project compiles with errors. >>> I tried that on the latest master branch. Are you using some stable >>> release or the reported issue is on master? >>> >>> Best regards, >>> Petro >>> >>> пт, 17 бер. 2023 р. о 05:32 Gustavo Soares < >>> gustavo.felipesoa...@hotmail.com> пише: >>> >>>> I'm trying to compile the webserver example first. When I created the >>>> config file, the chosen configuration for esp32 was >>>> 'esp32-devkitc:nsh'. >>>> >>>> Em sex., 17 de mar. de 2023 às 01:14, Petro Karashchenko < >>>> petro.karashche...@gmail.com> escreveu: >>>> >>>>> Hello Gustavo, >>>>> >>>>> Are you trying to compile an example or your custom application? >>>>> If you are getting started with an example, so maybe you make "make >>>>> savedefconfig" and send it to me, so I can try locally? >>>>> >>>>> Best regards, >>>>> Petro >>>>> >>>>> On Fri, Mar 17, 2023, 5:08 AM Gustavo Soares < >>>>> gustavo.felipesoa...@hotmail.com> wrote: >>>>> >>>>>> Hello, Petro! >>>>>> >>>>>> inside menuconfig IPv4 is enabled: >>>>>> [image: image.png] >>>>>> >>>>>> It's also possible to see the option in the .config file: >>>>>> [image: image.png] >>>>>> >>>>>> Thank you for your support, >>>>>> Gustavo. >>>>>> >>>>>> >>>>>> Em qui., 16 de mar. de 2023 22:56, Petro Karashchenko < >>>>>> petro.karashche...@gmail.com> escreveu: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I see that both "inet_ntoa" and "inet_ntoa_r" implementations are >>>>>>> guarded by "CONFIG_NET_IPv4" and "CONFIG_LIBC_IPv4_ADDRCONV". Could >>>>>>> you >>>>>>> take a look if your configuration has at least one of those options >>>>>>> enabled? >>>>>>> >>>>>>> Best regards, >>>>>>> Petro >>>>>>> >>>>>>> пт, 17 бер. 2023 р. о 01:57 Gustavo Soares < >>>>>>> gustavo.fssoare...@gmail.com> пише: >>>>>>> >>>>>>>> Hi! >>>>>>>> >>>>>>>> I'm starting a new project at college using NuttX and ESP-32. I'm >>>>>>>> trying to build a new application for NuttX: a webserver to read >>>>>>>> and >>>>>>>> execute Assembly! But the following error is showing up:[image: >>>>>>>> error description] >>>>>>>> [image: netprocfs_inet4addresses function (netdev_statistics.c >>>>>>>> file)] >>>>>>>> >>>>>>>> In menuconfig I enabled: >>>>>>>> Network support >>>>>>>> ├── Link layer support >>>>>>>> ├── Ethernet support >>>>>>>> ├── Late driver initialization >>>>>>>> ├── TCP/IP Networking >>>>>>>> >>>>>>>> Application Configuration >>>>>>>> ├── Network utilities >>>>>>>> ├── Network initialization >>>>>>>> ├── Network initialization thread >>>>>>>> ├── Hardware has no MAC Address >>>>>>>> >>>>>>>> Could someone help me with this? >>>>>>>> And also, I've been searching for articles about building >>>>>>>> applications for NuttX, but didn't find any. Does anyone know where >>>>>>>> I >>>>>>>> can >>>>>>>> find them? >>>>>>>> >>>>>>>> >>>>>>>> >> >
