Thanks for the tip Alan! I modified that config slightly(reconfigure the clocks) and got it to boot and output information on the serial port. Now I just need to configure the applications appropriately.
-Robert Middleton On Sun, Aug 13, 2023 at 2:19 PM Alan C. Assis <acas...@gmail.com> wrote: > > Hi Robert, > > Why don't you use the omnibusf4 board as starting point, since it uses > same MCU model: > > arm/stm32/omnibusf4/configs/nsh/defconfig:CONFIG_ARCH_CHIP_STM32F405RG=y > > Starting with a board and changing the MCU to other like you are doing > will cause many issues, like this CONFIG_MM_REGIONS. > > It is better to start with a board using same MCU as your and then you > evolve it to a different animal. Normally I test the board more > similar to mine and then I create a new board from it, copying the > entire board directory to a new name changing the boards/Kconfig in > three places to add my new board and rename all > CONFIG_BOARD_BLABLABLANAME to my board name. > > BR, > > Alan > > On 8/13/23, Robert Middleton <osfan6...@gmail.com> wrote: > > Hi all, > > > > I'm working on a project and looking at the STM32F405RG with NuttX but > > I'm running into some issues getting it to compile. For a dev board, > > I'm using the SparkFun STM32 Thing Plus board, and my hope is to get > > the console running on the USB port, but first I just want to get a > > serial console working. > > > > What I've tried to do: > > 1. Run configure with a similar processor: ./tools/configure.sh -l > > nucleo-f4x1re:f401-nsh > > 2. Change the system type via menuconfig(System Type -> STM32 Chip > > Selection, select STM32F405RG) > > 3. Try to build(using 'make'). This fails with an error: > > ./chip/stm32_allocateheap.c:469:10: error: #error "CCM SRAM excluded > > from the heap because CONFIG_MM_REGIONS < 2" > > 4. Try to reconfigure NuttX with menuconfig, but now things are stuck > > and don't work: > > robert@debian:~/nuttx$ make menuconfig > > CP: arch/dummy/Kconfig to /home/robert/nuttx/arch/dummy/dummy_kconfig > > CP: boards/dummy/Kconfig to /home/robert/nuttx//Kconfig > > LN: platform/board to /home/robert/apps/platform/dummy > > LN: include/arch to arch/arm/include > > LN: include/arch/board to /home/robert/nuttx//include > > LN: drivers/platform to /home/robert/nuttx/drivers/dummy > > LN: include/arch/chip to /home/robert/nuttx/arch/arm/include/stm32 > > LN: arch/arm/src/chip to /home/robert/nuttx/arch/arm/src/stm32 > > LN: arch/arm/src/board to /home/robert/nuttx//src > > No directory at /home/robert/nuttx//src > > make[1]: *** [tools/Unix.mk:300: arch/arm/src/board] Error 1 > > make: *** [tools/Unix.mk:684: menuconfig] Error 2 > > > > Any thoughts as to what to look into to try and fix the problem? > > Trying to build on Debian 11, with ARM GCC 8.3.1 from apt. > > > > -Robert Middleton > >
