Hi Roberto, What toolchain did you use?
Please include it as Mr Lup did in previous email. BR, Alan On Thu, Jul 25, 2024 at 5:28 AM Roberto Bucher <bubu.buc...@gmail.com> wrote: > +1 > > Tested on nucleo-h745ZI-Q, nucleo-H743ZI2 and nucleo-F746ZG > > In addition I've generated code fusing pysimCoder for a nucleo-F746ZG > board (PWM+Encoders) -> OK > > Ciao > > Roberto > > Results: > > *nucleo-h745zi:pysim_cm7 > * > -rwxrwxr-x 1 bucher bucher 3681776 Jul 25 10:00 nuttx > -rwxrwxr-x 1 bucher bucher 316900 Jul 25 10:00 nuttx.bin > -rw-rw-r-- 1 bucher bucher 6194693 Jul 25 10:00 nuttx-export-12.6.0.tar.gz > -rw-rw-r-- 1 bucher bucher 891423 Jul 25 10:00 nuttx.hex > -rw-rw-r-- 1 bucher bucher 47 Jul 25 10:00 nuttx.manifest > -rw-rw-r-- 1 bucher bucher 2317845 Jul 25 10:00 nuttx.map > > > Builtin Apps: > nsh ping renew sh telnetd > nsh> ifconfig > eth0 Link encap:Ethernet HWaddr d2:a8:9c:1c:fc:bf at UP mtu 1486 > inet addr:192.168.1.23 DRaddr:192.168.1.1 Mask:255.255.255.0 > > lo Link encap:Local Loopback at RUNNING mtu 1518 > inet addr:127.0.0.1 DRaddr:127.0.0.1 Mask:255.0.0.0 > > IPv4 TCP UDP ICMP > Received 0002 0000 0002 0000 > Dropped 0000 0000 0000 0000 > IPv4 VHL: 0000 Frg: 0000 > Checksum 0000 0000 0000 ---- > TCP ACK: 0000 SYN: 0000 > RST: 0000 0000 > Type 0000 ---- ---- 0000 > Sent 0002 0000 0002 0000 > Rexmit ---- 0000 ---- ---- > nsh> free > total used free maxused maxfree > nused nfree > Umem: 678860 18404 660456 18792 481736 > 55 4 > > ======================= > > *nucleo-h743zi2:pysim* > > -rwxrwxr-x 1 bucher bucher 3670116 Jul 25 10:03 nuttx > -rwxrwxr-x 1 bucher bucher 316508 Jul 25 10:03 nuttx.bin > -rw-rw-r-- 1 bucher bucher 6183828 Jul 25 10:03 nuttx-export-12.6.0.tar.gz > -rw-rw-r-- 1 bucher bucher 890314 Jul 25 10:03 nuttx.hex > -rw-rw-r-- 1 bucher bucher 47 Jul 25 10:03 nuttx.manifest > -rw-rw-r-- 1 bucher bucher 2306841 Jul 25 10:03 nuttx.map > > Builtin Apps: > nsh ping renew sh telnetd > nsh> ifconfig > eth0 Link encap:Ethernet HWaddr 52:d3:8e:aa:5d:41 at UP mtu 1486 > inet addr:192.168.1.251 DRaddr:192.168.1.1 Mask:255.255.255.0 > > lo Link encap:Local Loopback at RUNNING mtu 1518 > inet addr:127.0.0.1 DRaddr:127.0.0.1 Mask:255.0.0.0 > > IPv4 TCP UDP ICMP > Received 0002 0000 0002 0000 > Dropped 0000 0000 0000 0000 > IPv4 VHL: 0000 Frg: 0000 > Checksum 0000 0000 0000 ---- > TCP ACK: 0000 SYN: 0000 > RST: 0000 0000 > Type 0000 ---- ---- 0000 > Sent 0002 0000 0002 0000 > Rexmit ---- 0000 ---- ---- > nsh> free > total used free maxused maxfree > nused nfree > Umem: 973772 18460 955312 18848 481736 > 58 5 > > > ===================== > > *nucleo-144:f746-pysim* > > -rwxrwxr-x 1 bucher bucher 463584 Jul 25 10:04 nuttx/nuttx > -rwxrwxr-x 1 bucher bucher 299904 Jul 25 10:04 nuttx/nuttx.bin > -rw-rw-r-- 1 bucher bucher 3395033 Jul 25 10:04 > nuttx/nuttx-export-12.6.0.tar.gz > -rw-rw-r-- 1 bucher bucher 37 Jul 25 10:04 nuttx/nuttx.manifest > -rw-rw-r-- 1 bucher bucher 1684836 Jul 25 10:04 nuttx/nuttx.map > > Builtin Apps: > nsh ping renew sh telnetd > nsh> ifconfig > eth0 Link encap:Ethernet HWaddr 5e:11:f1:23:d9:ce at UP mtu 1486 > inet addr:192.168.1.213 DRaddr:192.168.1.1 Mask:255.255.255.0 > > lo Link encap:Local Loopback at RUNNING mtu 1518 > inet addr:127.0.0.1 DRaddr:127.0.0.1 Mask:255.0.0.0 > > IPv4 TCP UDP ICMP > Received 0002 0000 0002 0000 > Dropped 0000 0000 0000 0000 > IPv4 VHL: 0000 Frg: 0000 > Checksum 0000 0000 0000 ---- > TCP ACK: 0000 SYN: 0000 > RST: 0000 0000 > Type 0000 ---- ---- 0000 > Sent 0003 0000 0003 0000 > Rexmit ---- 0000 ---- ---- > nsh> free > total used free maxused maxfree > nused nfree > Umem: 218772 14124 204648 14496 201888 > 54 4 > > ======================= > > > > On 7/25/24 9:41 AM, Alin Jerpelea wrote: > > Hello all, > > Apache NuttX 12.6.0 RC1 has been staged under [1] and it's > > time to vote on accepting it for release. Voting will be open for 72hr. > > > > A minimum of 3 binding +1 votes and more binding +1 than binding -1 are > > required to pass. > > > > The Apache requirements for approving a release can be found here [3] > > "Before voting +1 PMC members are required to download the signed > > source code package, compile it as provided, and test the resulting > > executable on their own platform, along with also verifying that the > > package meets the requirements of the ASF policy on releases." > > > > A document to walk through some of this process has been published on > > our project wiki and can be found here [4]. > > > > [ ] +1 accept (indicate what you validated - e.g. performed the non-RM > > items in [4]) > > [ ] -1 reject (explanation required) > > > > Thank you all, > > Alin Jerpelea > > > > SCM Information: > > Release tag: nuttx-12.6.0-RC1 > > Hash for the release nuttx tag: > 7a865b247969a9dbc06eddcaf58c59a14dd05d6d > > Hash for the release nuttx-apps tag: > > cda5140c4d1ffa95764df7cb47bbc34b5663adff > > > > [1]https://dist.apache.org/repos/dist/dev/nuttx/12.6.0-RC1/ > > [2] > > > https://raw.githubusercontent.com/apache/nuttx/nuttx-12.6.0-RC1/ReleaseNotes > > [3]https://www.apache.org/dev/release.html#approving-a-release > > [4] > > > https://cwiki.apache.org/confluence/display/NUTTX/Validating+a+staged+Release > > >
