I have STM32 NUCLEO-H755ZI board just in case some quick manual test is required I can help in testing :-)
-- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info On Sat, Feb 7, 2026 at 1:05 AM Matteo Golin <[email protected]> wrote: > > If stack size fixes your issue, please submit a patch with the new size (or > let us know and I can submit one) so the configuration is stable in > mainline. > > Best, > Matteo > > On Fri, Feb 6, 2026, 6:32 PM <[email protected]> wrote: > > > Hi, > > > > I can't tell from the log if that's your case, but I am working on a port > > of a > > very similar board to yours (nucleo-h723zg) and I also encountered > > crashes. I > > believe those were caused by the stack overflow, just as Nathan suggested. > > Setting the ARCH_INTERRUPTSTACK to 2048 lead to no more crashes in my case. > > > > Michal > > > > On Fri, 2026-02-06 at 16:09 -0500, Peter Barada wrote: > > > I have a STM32 Nucleo-h753zi board - and configured a build for > > > nucleo-743zi2:nsh (which is closest board/chip; the stm32h753zi is same > > > as stm32h743zi but h753zi includes crypto acceleration hardware). > > > > > > Build works, but if I boot and try 'time ls' nuttx faults: > > > > > > nsh> uname -a > > > NuttX 0.0.0 9ecfff0833 Feb 6 2026 15:45:28 arm nucleo-h743zi2 > > > nsh> time ls > > > /: > > > dev/ > > > > > > 0.00dump_assert_info: Current Version: NuttX 0.0.0 9ecfff0833 Feb 6 > > 2026 15:45:28 arm > > > dump_assert_info: Assertion failed panic: at file: :0 task: <noname> > > process: <noname> 0x800c9fd > > > up_dump_register: R0: 0801e624 R1: 0000000a R2: 00000050 R3: 0000000a > > > up_dump_register: R4: 00000001 R5: 240000e4 R6: 00000000 FP: 00000000 > > > up_dump_register: R8: 00000000 SB: 00000000 SL: 00000000 R11: 00000000 > > > up_dump_register: IP: 00000000 SP: 38000c08 LR: 080059db PC: 08005984 > > > up_dump_register: xPSR: 41000000 BASEPRI: 00000000 CONTROL: 00000000 > > > up_dump_register: EXC_RETURN: ffffffe9 > > > dump_stackinfo: User Stack: > > > dump_stackinfo: base: 0x38000518 > > > dump_stackinfo: size: 00002000 > > > dump_stackinfo: sp: 0x38000c08 > > > stack_dump: 0x38000be8: 00000000 00000000 00000000 00000000 00000000 > > 00000000 00000000 00000000 > > > stack_dump: 0x38000c08: 0000000a 0801e624 0801e624 38000200 38000fac > > 00000000 0801e624 080172c1 > > > stack_dump: 0x38000c28: 00000000 0801e624 38000200 38000158 00000000 > > 00000000 38000fac 0800caa1 > > > stack_dump: 0x38000c48: 00000000 0800cc77 0801e624 000002fc 38000500 > > 00000001 00000001 38000cf0 > > > stack_dump: 0x38000c68: 38000cf0 00000008 38000200 00000000 00000000 > > 0800ca79 38000500 00000001 > > > stack_dump: 0x38000c88: 00000064 38000cf0 00000064 0800ca33 38000500 > > 00000001 00000064 00000000 > > > stack_dump: 0x38000ca8: 00000000 08009325 00000000 38000500 00000001 > > 0800c9fd 00000000 080052f1 > > > stack_dump: 0x38000cc8: 00000000 38000500 00000000 38000158 00000001 > > 00000001 00000000 00000000 > > > stack_dump: 0x38000ce8: 00000000 00000000 00000000 00000000 00000000 > > 00000000 00000000 00000000 > > > dump_tasks: PID GROUP PRI POLICY TYPE NPX STATE EVENT > > SIGMASK STACKBASE STACKSIZE COMMAND > > > dump_task: 0 0 0 FIFO Kthread - Ready > > 0000000000000000 0x240018b0 1000 <noname> > > > dump_task: 1 1 100 RR Task - Running > > 0000000000000000 0x38000518 2000 <noname> ��]���& > > > > > > Wondering if anyone has run across this before? Backtrace shows: > > > > > > Program received signal SIGTRAP, Trace/breakpoint trap. > > > exception_common () at armv7-m/arm_exception.S:127 > > > 127 mrs r0, ipsr > > /* R0=exception number */ > > > where > > > #0 exception_common () at armv7-m/arm_exception.S:127 > > > #1 <signal handler called> > > > #2 0x08005984 in env_cmpname (pszname=0x801e624 "PS1", > > > peqname=0xa <error: Cannot access memory at address 0xa>) > > > at environ/env_findvar.c:50 > > > #3 0x080059da in env_findvar (group=0x38000200, pname=0x801e624 "PS1") > > > at environ/env_findvar.c:105 > > > #4 0x080172c0 in getenv (name=0x801e624 "PS1") at > > environ/env_getenv.c:89 > > > #5 0x0800caa0 in nsh_update_prompt () at nsh_prompt.c:77 > > > #6 0x0800cc76 in nsh_session (pstate=0x38000cf0, login=1, argc=1, > > > argv=0x38000500) at nsh_session.c:249 > > > #7 0x0800ca78 in nsh_consolemain (argc=1, argv=0x38000500) > > > at nsh_consolemain.c:77 > > > #8 0x0800ca32 in nsh_main (argc=1, argv=0x38000500) at nsh_main.c:76 > > > #9 0x08009324 in nxtask_startup (entrypt=0x800c9fd <nsh_main>, argc=1, > > > argv=0x38000500) at sched/task_startup.c:72 > > > #10 0x080052f0 in nxtask_start () at task/task_start.c:104 > > > #11 0x00000000 in ?? () > > > > > > Scratching the surface shows that env_findvar() is called with group > > > pointer of 0x38000200, group->tg_envp is 0x380004b8, both which are > > > reasonable. But *group->tg_envp is 0xA. Further if I "watch > > > *(int*)0x380004b8" in GDB, I see it is getting overwritten by > > > up_serialout() invoked from stm32_serial.c::up_send. > > > > > > Any suggestions on how I can best track this down further? > > > > > > Thanks in advance! > > > > > > >
