raiden00pl opened a new pull request, #37:
URL: https://github.com/apache/nuttx-ntfc/pull/37
A target built with CONFIG_CONSOLE_NETDEV has its NSH console on a
network transport, UDP or CAN ISO-TP, not on a serial port.
- The new netconsole core option runs the sim/qemu console over the
transport instead of the child pty; the pty output goes to the debug
log.
- The new netdev device is for real hardware: NTFC talks to the board
only over the transport and resets it with the reboot command.
The host opens the transport before the target is started or reset, so
the boot output is not lost. UDP learns the target address from the
datagrams it receives. Writes are split into datagrams that fit the
target console receive buffer, and each one waits for the previous one
to leave, as an ISO-TP socket sends one message at a time.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: [email protected]
For queries about this service, please contact Infrastructure at:
[email protected]
