I would recommend to move this discussion to another thread. According to your question, just have recorded video with audio om demo.dataved.ru Maybe mic/camera problems?
On Wed, Mar 5, 2014 at 8:55 PM, Peter Dähn <[email protected]> wrote: > Hi there... > > I was testing RC2 today... > > I just can get audio+video using IE, with Chrome an FF I got no sound > recorded.. :-( I didn't test Safari... > > Any Ideas? Is it reproducible? If it is in that way, it wouldn't be good > to release it in that way... > > Greetings Peter > > Am 04.03.2014 17:36, schrieb Peter Dähn: > > no time left today... someone bordered me with wp-multisite config... :-( > > > > try to figure it out tomorrow.. > > > > Greetings Peter > > > > Am 04.03.2014 16:09, schrieb Maxim Solodovnik: > >> I missed the video window on your screenshot .... > >> It's black, something wrong with it > >> This need to be investigated, but i guess it's not screen sharing > problem > >> > >> > >> On Tue, Mar 4, 2014 at 9:53 PM, Peter Dähn <[email protected]> wrote: > >> > >>> well.. that what i did... i got synchronized video under windows-client > >>> with sound.. once.. seemed to be fine... > >>> > >>> but i just get the record played inside om, when running OM-server in > >>> debug mode (start red5-debug.sh)... any ideas about that? > >>> > >>> > >>> Am 04.03.2014 15:39, schrieb Maxim Solodovnik: > >>>> screen sharing applet can not record sound > >>>> to get sound you need to start video stream (select camera and mic) > >>>> then perform the recording > >>>> > >>>> > >>>> On Tue, Mar 4, 2014 at 8:59 PM, Peter Dähn <[email protected] > >>>> <mailto:[email protected]>> wrote: > >>>> > >>>> well it was ffmpeg... i recompiled it and now i got a record > >>>> without the "!" sign and it is played in OM... > >>>> > >>>> but the sound is missing... :-( with the internal player and with > >>>> the downloaded files as well... :-( > >>>> > >>>> > >>>> Am 04.03.2014 14:16, schrieb Peter Dähn: > >>>>> yes... that what i meant with "differs from production > server"... I > >>> try > >>>>> to fix it... > >>>>> > >>>>> brb > >>>>> > >>>>> Am 04.03.2014 13:54, schrieb Maxim Solodovnik: > >>>>>> It seems like your ffmpeg has no x264 support :( > >>>>>> > >>>>>> both following commands are failed: > >>>>>> /usr/local/bin/ffmpeg -i > >>>>>> > >>> > /home/worker/red5_3_0/red5/webapps/openmeetings/streams/hibernate/flvRecording_298.flv > >>>>>> -c:v libx264 -crf 24 -pix_fmt yuv420p -preset medium -profile:v > >>> baseline > >>>>>> -c:a libfaac -c:a libfdk_aac -b:a 32k -s 1440x800 > >>>>>> > >>> > /home/worker/red5_3_0/red5/webapps/openmeetings/streams/hibernate/flvRecording_298.flv.mp4 > >>>>>> and > >>>>>> /usr/local/bin/ffmpeg -i > >>>>>> > >>> > /home/worker/red5_3_0/red5/webapps/openmeetings/streams/hibernate/flvRecording_298.flv.mp4 > >>>>>> -vcodec libtheora -acodec libvorbis > >>>>>> > >>> > /home/worker/red5_3_0/red5/webapps/openmeetings/streams/hibernate/flvRecording_298.flv.ogg > >>>>>> Could you please run it from the console and check output? > >>>>>> Or check output via OM GUI? > >>>>>> > >>>>>> > >>>>>> On Tue, Mar 4, 2014 at 6:03 PM, Peter Dähn <[email protected]> > >>> <mailto:[email protected]> wrote: > >>>>>>> RC2 is compiled and deployed in a minute... I'll try it out... > >>>>>>> > >>>>>>> the former version was " 3.0.0-SNAPSHOT 1573484 3-March-2014" > >>>>>>> > >>>>>>> I'll attach the logs from yesterday... by now i saw a few > >>> errors.. i > >>>>>>> didn't had the time to investigate... :-( > >>>>>>> > >>>>>>> I'll check RC2 now.. > >>>>>>> > >>>>>>> cu > >>>>>>> > >>>>>>> > >>>>>>> Am 04.03.2014 11:50, schrieb Maxim Solodovnik: > >>>>>>>> Hello Peter, > >>>>>>>> > >>>>>>>> What version of OM were you using? > >>>>>>>> Could you retest using RC2? (it contains screen sharing fixes) > >>>>>>>> Were you able to record interview? > >>>>>>>> Can you try multiple resolutions/fps? > >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> On Tue, Mar 4, 2014 at 4:02 PM, Peter Dähn <[email protected] > > > >>> <mailto:[email protected]> wrote: > >>>>>>>>> Hi there, > >>>>>>>>> > >>>>>>>>> i had the same problem, I couldn't get a valid record on my > >>>>>>>>> test-system. I use Linux. I thought it is a problem with my > >>> test-env, > >>>>>>>>> because it differs a bit from the production-server... > >>>>>>>>> > >>>>>>>>> so.. I think, recording should be fixed before release... > sorry > >>> :-( > >>>>>>>>> Greetings Peter > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> Am 04.03.2014 09:27, schrieb [email protected] <mailto: > >>> [email protected]>: > >>>>>>>>>> "not ready status will be displayed after click on "!" icon > in > >>> the > >>>>>>>>> popup." > >>>>>>>>>> I did not get a not ready status displayed. I see the icon > on > >>> the left, > >>>>>>>>> but > >>>>>>>>>> neither by clicking on the icon nor on the recording > anything > >>> happens. > >>>>>>>>>> Can we make it that somehow that it will be displayed > directly > >>> when you > >>>>>>>>>> click on the recording? > >>>>>>>>>> > >>>>>>>>>> Having links that you click and under some circumstances > >>> nothing > >>>>>>> happens > >>>>>>>>>> are just very hard to understand for end-users. Previously > you > >>> did get > >>>>>>>>> the > >>>>>>>>>> pop warning 'not ready' directly on a click on the recording > >>> when it is > >>>>>>>>> not > >>>>>>>>>> yet ready for viewing. > >>>>>>>>>> > >>>>>>>>>> I tried to do three recordings on demo.dataved.ru < > >>> http://demo.dataved.ru>, all failed. > >>>>>>> Possibly > >>>>>>>>>> because I am using Mac and/or bandwidth issues. > >>>>>>>>>> I was able to produce a recording at the 06th of February on > >>> that > >>>>>>> server > >>>>>>>>>> with a Mac, so it is not a general issue. > >>>>>>>>>> In the error log window I can see some ffmpeg command fails > >>> (see > >>>>>>> attached > >>>>>>>>>> on the bottom of the mail some example) > >>>>>>>>>> > >>>>>>>>>> But the screen sharer itself stayed at 50% of the CPU which > is > >>>>>>> acceptable > >>>>>>>>>> for the first release of 3.x.x from my point of view. > >>>>>>>>>> Just to get some recordings produced with it would be > >>> something I would > >>>>>>>>> be > >>>>>>>>>> keen to verify. > >>>>>>>>>> > >>>>>>>>>> Another issues was that I cannot enter a room on > >>> demo.dataved.ruafter a > >>>>>>>>>> while. I just stuck in the screen when the loading bar in > >>> front of > >>>>>>>>> entering > >>>>>>>>>> the conference room is complete. I guess there is some null > >>> pointer > >>>>>>>>>> exception in the code but I cannot load the debug window on > >>> that > >>>>>>> server. > >>>>>>>>>> I was using the "remember me" cookie, after deleting the > >>> cookie and > >>>>>>>>>> re-login entering the room did work again. > >>>>>>>>>> > >>>>>>>>>> What about the attribute "length" of the recording in the > UI, > >>> the field > >>>>>>>>>> seems to be simply not filled with any value yet, even if > the > >>> recording > >>>>>>>>> was > >>>>>>>>>> successful. Is that not implemented yet? > >>>>>>>>>> > >>>>>>>>>> Btw the autocomplete box in the private message center and > >>> calendar is > >>>>>>>>>> a-w-e-s-o-m-e > >>>>>>>>>> I think we should leave it as is. Normally you can only send > >>> messages > >>>>>>> to > >>>>>>>>>> your contacts, but I think like that it is even better. The > >>> old one was > >>>>>>>>> too > >>>>>>>>>> restrictive to be intuitive. > >>>>>>>>>> When attaching a meeting request with a date/time to a > private > >>> message > >>>>>>>>> ... > >>>>>>>>>> it did not show up in my calendar afterwards. Is that > >>> something that > >>>>>>>>> needs > >>>>>>>>>> to done still ? > >>>>>>>>>> > >>>>>>>>>> This is the FFMPEG error on all my recordings: > >>>>>>>>>> process: previewFullFLV command: ffmpeg -i > >>>>>>>>>> > >>> > /opt/openmeetings-3.0.0.r1573575/webapps/openmeetings/streams/hibernate/flvRecording_210.flv > >>>>>>>>>> -vcodec mjpeg -vframes 1 -an -f rawvideo -s 1072x672 > >>>>>>>>>> > >>> > /opt/openmeetings-3.0.0.r1573575/webapps/openmeetings/streams/hibernate/flvRecording_210.jpg > >>>>>>>>>> exception: null error: ffmpeg version git-2013-10-22-c68faca > >>> Copyright > >>>>>>>>> (c) > >>>>>>>>>> 2000-2013 the FFmpeg developers built on Oct 22 2013 > 12:58:25 > >>> with gcc > >>>>>>>>> 4.6 > >>>>>>>>>> (Ubuntu/Linaro 4.6.3-1ubuntu5) configuration: > >>>>>>> --prefix=/root/ffmpeg_build > >>>>>>>>>> --extra-cflags=-I/root/ffmpeg_build/include > >>>>>>>>>> --extra-ldflags=-L/root/ffmpeg_build/lib --bindir=/root/bin > >>>>>>>>>> --extra-libs=-ldl --enable-gpl --enable-libass > >>> --enable-libfdk-aac > >>>>>>>>>> --enable-libmp3lame --enable-libopus --enable-libtheora > >>>>>>>>> --enable-libvorbis > >>>>>>>>>> --enable-libvpx --enable-libx264 --enable-nonfree > >>> --enable-x11grab > >>>>>>>>>> libavutil 52. 47.101 / 52. 47.101 libavcodec 55. 37.102 / > 55. > >>> 37.102 > >>>>>>>>>> libavformat 55. 19.103 / 55. 19.103 libavdevice 55. 4.100 / > >>> 55. 4.100 > >>>>>>>>>> libavfilter 3. 89.100 / 3. 89.100 libswscale 2. 5.101 / 2. > >>> 5.101 > >>>>>>>>>> libswresample 0. 17.104 / 0. 17.104 libpostproc 52. 3.100 / > >>> 52. 3.100 > >>>>>>>>> [flv > >>>>>>>>>> @ 0x3693900] Could not find codec parameters for stream 0 > >>> (Video: none, > >>>>>>>>> 200 > >>>>>>>>>> kb/s): unspecified size Consider increasing the value for > the > >>>>>>>>>> 'analyzeduration' and 'probesize' options Input #0, flv, > from > >>>>>>>>>> > >>> > '/opt/openmeetings-3.0.0.r1573575/webapps/openmeetings/streams/hibernate/flvRecording_210.flv': > >>>>>>>>>> Metadata: noaudiocodec : 0 server : Red5 Server 1.0.0 RC3 > Rev: > >>> 4393 > >>>>>>>>>> creationdate : Tue Mar 04 08:04:03 CET 2014 canSeekToEnd : > true > >>>>>>> encoder : > >>>>>>>>>> Lavf55.19.103 Duration: 00:01:28.87, start: 0.000000, > bitrate: > >>> 593 kb/s > >>>>>>>>>> Stream #0:0: Video: none, 200 kb/s, 1k tbr, 1k tbn, 1k tbc > >>> Stream #0:1: > >>>>>>>>>> Audio: mp3, 22050 Hz, mono, s16p, 32 kb/s Output #0, > rawvideo, > >>> to > >>> > '/opt/openmeetings-3.0.0.r1573575/webapps/openmeetings/streams/hibernate/flvRecording_210.jpg': > >>>>>>>>>> Metadata: noaudiocodec : 0 server : Red5 Server 1.0.0 RC3 > Rev: > >>> 4393 > >>>>>>>>>> creationdate : Tue Mar 04 08:04:03 CET 2014 canSeekToEnd : > true > >>>>>>> encoder : > >>>>>>>>>> Lavf55.19.103 Output file #0 does not contain any stream > >>> exitValue: > >>>>>>> null > >>>>>>>>>> out: > >>>>>>>>>> > >>>>>>>>>> Sebastian > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> 2014-03-04 20:18 GMT+13:00 Maxim Solodovnik < > >>> [email protected]> <mailto:[email protected]>: > >>>>>>>>>>> Currently "not ready" recordings are marked as "broken" > (same > >>> "!" > >>>>>>> icon) > >>>>>>>>>>> not ready status will be displayed after click on "!" icon > in > >>> the > >>>>>>> popup. > >>>>>>>>>>> interview recordings are now converted as fast as ordinary > >>> recordings. > >>>>>>>>>>> Icon can be changed, please suggest one :) (Do you feel it > is > >>> blocker? > >>>>>>>>> or > >>>>>>>>>>> maybe we can release 3.0.1 will all such minor fixes?) > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> http://demo.dataved.ru:5080/ contains the same SNAPSHOT > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> On Tue, Mar 4, 2014 at 2:12 PM, [email protected] > <mailto: > >>> [email protected]> < > >>>>>>>>>>> [email protected] <mailto:[email protected]> > >>>>>>>>>>>> wrote: > >>>>>>>>>>>> I think there is still a slight glitch with the recordings > >>> UI. > >>>>>>>>>>>> Previously, when a recording was not yet ready for viewing > >>> (because > >>>>>>> it > >>>>>>>>> is > >>>>>>>>>>>> still processing) there was a message in the UI telling > you > >>> that. In > >>>>>>>>> the > >>>>>>>>>>>> case of interviews there was even a progress includes in > >>> percentages > >>>>>>> as > >>>>>>>>>>>> interviews take 1 minutes of processing time for the > >>> rendering of a 1 > >>>>>>>>>>>> minute of video. > >>>>>>>>>>>> > >>>>>>>>>>>> If you at the moment are too fast in switching to the UI > and > >>> there > >>>>>>> was > >>>>>>>>>>> some > >>>>>>>>>>>> kind of error or its kind of simply not ready for viewing > >>> you click > >>>>>>> on > >>>>>>>>>>> the > >>>>>>>>>>>> video and just nothing happens. > >>>>>>>>>>>> > >>>>>>>>>>>> What is the current mechanism? Do we catch in the > recordings > >>> UI if > >>>>>>> the > >>>>>>>>>>>> video is ready for viewing or not? > >>>>>>>>>>>> > >>>>>>>>>>>> Thanks, > >>>>>>>>>>>> Sebastian > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> 2014-03-04 19:54 GMT+13:00 [email protected] <mailto: > >>> [email protected]> < > >>>>>>>>> [email protected] <mailto:[email protected]> > >>>>>>>>>>>> : > >>>>>>>>>>>> > >>>>>>>>>>>>> Well if its just me I do not want to complain. > >>>>>>>>>>>>> I am using a Mac, probably that is part of the problem. > >>>>>>>>>>>>> > >>>>>>>>>>>>> Let me try to run a couple of tests. > >>>>>>>>>>>>> > >>>>>>>>>>>>> Btw: Is http://demo.dataved.ru:5080/ the same SNAPSHOT > >>> that is up > >>>>>>> for > >>>>>>>>>>> a > >>>>>>>>>>>>> vote? > >>>>>>>>>>>>> > >>>>>>>>>>>>> Thanks! > >>>>>>>>>>>>> Sebastian > >>>>>>>>>>>>> > >>>>>>>>>>>>> > >>>>>>>>>>>>> 2014-03-04 17:14 GMT+13:00 Maxim Solodovnik < > >>> [email protected]> <mailto:[email protected]>: > >>>>>>>>>>>>> Hello Sebastian, > >>>>>>>>>>>>>> I was unable to fix high CPU usage because I can't see > it > >>> :( > >>>>>>>>>>>>>> We have tried to reproduce it on our machines (me and > >>> Vasiliy, > >>>>>>>>> Vasiliy > >>>>>>>>>>>>>> provides you with his measurements), but it is not > >>> reproducible. > >>>>>>>>>>>>>> No additional comments were provided, so this issue have > >>> been > >>>>>>>>>>> postponed > >>>>>>>>>>>>>> On Tue, Mar 4, 2014 at 11:08 AM, [email protected] > <mailto: > >>> [email protected]> < > >>>>>>>>>>>>>> [email protected] <mailto:[email protected]>> > >>> wrote: > >>>>>>>>>>>>>>> Hi Maxim, > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> Thanks, I think one of the major obstacles has been the > >>> CPU usage > >>>>>>> of > >>>>>>>>>>>> the > >>>>>>>>>>>>>>> screen sharing application. > >>>>>>>>>>>>>>> Did we reduce the CPU usage significantly? > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> Thanks, > >>>>>>>>>>>>>>> Sebastian > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> 2014-03-04 5:41 GMT+13:00 Alvaro <[email protected]> > >>> <mailto:[email protected]>: > >>>>>>>>>>>>>>>> +1 > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> ------------------- > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> El lun, 03-03-2014 a las 23:09 +0700, Maxim Solodovnik > >>> escribió: > >>>>>>>>>>>>>>>>> Dear OpenMeetings Community, > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> I would like to start a vote about releasing Apache > >>> OpenMeetings > >>>>>>>>>>>>>> 3.0.0 > >>>>>>>>>>>>>>>> RC2 > >>>>>>>>>>>>>>>>> Main changes are covered in the > >>>>>>>>>>>>>>>>> Readme: > >>> https://svn.apache.org/repos/asf/openmeetings/tags/3.0.0RC2/README > >>>>>>>>>>>>>>>>> Full Changelog: > >>>>>>>>>>>>>>>>> > >>> https://svn.apache.org/repos/asf/openmeetings/tags/3.0.0RC2/CHANGELOG > >>>>>>>>>>>>>>>>> Release artefacts: > >>>>>>>>>>>>>>>>> > >>> https://dist.apache.org/repos/dist/dev/openmeetings/3.0.0/rc2/ > >>>>>>>>>>>>>>>>> Tag: > >>>>>>>>>>> > https://svn.apache.org/repos/asf/openmeetings/tags/3.0.0RC2/ > >>>>>>>>>>>>>>>>> PGP release keys (signed using > >>>>>>>>>>>>>>>>> C467526E): > >>> https://dist.apache.org/repos/dist/dev/openmeetings/3.0.0/rc2/KEYS > >>>>>>>>>>>>>>>>> Vote will be open for 72 hours. > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> [ ] +1 approve > >>>>>>>>>>>>>>>>> [ ] +0 no opinion > >>>>>>>>>>>>>>>>> [ ] -1 disapprove (and reason why) > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> My vote is +1. > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> -- > >>>>>>>>>>>>>>> Sebastian Wagner > >>>>>>>>>>>>>>> https://twitter.com/#!/dead_lock < > >>> https://twitter.com/#%21/dead_lock> > >>>>>>>>>>>>>>> http://www.webbase-design.de > >>>>>>>>>>>>>>> http://www.wagner-sebastian.com > >>>>>>>>>>>>>>> [email protected] <mailto:[email protected]> > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>> -- > >>>>>>>>>>>>>> WBR > >>>>>>>>>>>>>> Maxim aka solomax > >>>>>>>>>>>>>> > >>>>>>>>>>>>> -- > >>>>>>>>>>>>> Sebastian Wagner > >>>>>>>>>>>>> https://twitter.com/#!/dead_lock < > >>> https://twitter.com/#%21/dead_lock> > >>>>>>>>>>>>> http://www.webbase-design.de > >>>>>>>>>>>>> http://www.wagner-sebastian.com > >>>>>>>>>>>>> [email protected] <mailto:[email protected]> > >>>>>>>>>>>>> > >>>>>>>>>>>> -- > >>>>>>>>>>>> Sebastian Wagner > >>>>>>>>>>>> https://twitter.com/#!/dead_lock < > >>> https://twitter.com/#%21/dead_lock> > >>>>>>>>>>>> http://www.webbase-design.de > >>>>>>>>>>>> http://www.wagner-sebastian.com > >>>>>>>>>>>> [email protected] <mailto:[email protected]> > >>>>>>>>>>>> > >>>>>>>>>>> -- > >>>>>>>>>>> WBR > >>>>>>>>>>> Maxim aka solomax > >>>>>>>>>>> > >>>>>>>>> -- > >>>>>>>>> B.Sc. Peter Dähn > >>>>>>>>> Virtueller Campus Rheinland-Pfalz <http://www.vcrp.de/> < > >>> http://www.vcrp.de/> > >>>>>>>>> Postfach 3049 > >>>>>>>>> 67653 Kaiserslautern > >>>>>>>>> Tel: 0631/205-4944 > >>>>>>>>> Olat <https://olat.vcrp.de/> <https://olat.vcrp.de/> > >>>>>>>>> > >>>> > >>>> -- > >>>> WBR > >>>> Maxim aka solomax > >> > > > -- WBR Maxim aka solomax
