Suggested-by: Justin Pettit <[email protected]> Suggested-by: Michael Mao <[email protected]> --- DESIGN | 22 ++++++++++++++++++++++ 1 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/DESIGN b/DESIGN index 2e3fced..886994b 100644 --- a/DESIGN +++ b/DESIGN @@ -10,6 +10,28 @@ information that can be used to let us know how we can make Open vSwitch more generally useful. +Multiple Table Support +====================== + +OpenFlow 1.0 has only rudimentary support for multiple flow tables. +Notably, OpenFlow 1.0 does not allow the controller to specify the +flow table to which a flow is to be added. Open vSwitch adds an +extension for this purpose, which is enabled on a per-OpenFlow +connection basis using the NXT_FLOW_MOD_TABLE_ID message. When the +extension is enabled, the upper 8 bits of the 'command' member in an +OFPT_FLOW_MOD or NXT_FLOW_MOD message designates the table to which a +flow is to be added. + +The Open vSwitch software switch implementation offers 255 flow +tables. On packet ingress, only the first flow table (table 0) is +searched, and the contents of the remaining tables are not considered +in any way. Tables other than table 0 only come into play when an +NXAST_RESUBMIT_TABLE action specifies another table to search. + +Tables 128 and above are reserved for use by the switch itself. +Controllers should use only tables 0 through 127. + + IPv6 ==== -- 1.7.4.4 _______________________________________________ dev mailing list [email protected] http://openvswitch.org/mailman/listinfo/dev
