On Mon, Jan 28, 2013 at 12:07 PM, Markus Schuster <m...@markus.schuster.name> wrote: > On Monday 28 January 2013 20:29:01 Jesse Gross wrote: >> Are you configuring bonding directly through the OVS command line or >> using Xen tools? > > I'm using the Xen tools to configure all networking related settings. > Currently I'm not deep enough into Open vSwitch - on the ToDo list since a few > years... > > >> Can you also send the output of ovs-vsctl show? > > Sure: > --- cut --- > d3a05b53-3615-46e2-8d5a-7e47aa50ad84 > Bridge "xenbr3" > fail_mode: standalone > Port "xenbr3" > Interface "xenbr3" > type: internal > Port "eth3" > Interface "eth3" > Bridge "xapi1" > fail_mode: standalone > Port "bond0" > Interface "eth0" > Interface "eth1" > Port "xapi1" > Interface "xapi1" > type: internal > Port "vif2.0" > Interface "vif2.0" > Bridge "xenbr2" > fail_mode: standalone > Port "xenbr2" > Interface "xenbr2" > type: internal > Port "eth2" > Interface "eth2" > ovs_version: "1.4.2" > --- cut --- > > >> >> Can you also post the logs? >> > >> > Well, there aren't much log files - at least not much I was able to find. >> [..] >> >> It's also odd that the ovs-vswitchd.log file is empty. Can you check >> the command line to make sure that it is supposed to be logging? > > Looks like Open vSwitch components are configured to log to syslog: > --- cut --- > ovsdb-server /etc/openvswitch/conf.db -vANY:CONSOLE:EMER -vANY:SYSLOG:INFO - > vANY:FILE:EMER --remote=punix:/var/run/openvswitch/db.sock -- > remote=db:Open_vSwitch,manager_options --private-key=db:SSL,private_key -- > certificate=db:SSL,certificate --bootstrap-ca-cert=db:SSL,ca_cert --no-chdir > --log-file=/var/log/openvswitch/ovsdb-server.log -- > pidfile=/var/run/openvswitch/ovsdb-server.pid --detach --monitor > > ovs-vswitchd unix:/var/run/openvswitch/db.sock -vANY:CONSOLE:EMER - > vANY:SYSLOG:INFO -vANY:FILE:EMER --mlockall --no-chdir --log- > file=/var/log/openvswitch/ovs-vswitchd.log --pidfile=/var/run/openvswitch/ovs- > vswitchd.pid --detach --monitor > --- cut --- > > So I grepped daemon.log for "ovs" - seems to be a good fit. I'll send you that > file in a direct message as I don't know the list policy regarding larger > files - feel free to forward as needed.
At first glance, all of the configuration seems fine to me. Realistically, it's been too long since I've looked at the SLB code to track this down. Ethan, I think you've worked on this the most recently, can you take a look? _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
