After restarting network service. "ovs-vsctl show" and "ovs-vsctl list-br" showing nothing - empty. So nothing to delete. ifconfig -a not showing bridge as well. system restart doesn't help.
My configs are: DEVICE=br0 ONBOOT=yes DEVICETYPE=ovs TYPE=OVSBridge NM_CONTROLLED=no BOOTPROTO=static IPADDR=192.168.0.111 NETMASK=255.255.255.0 HOTPLUG=no DEVICE=eth0 ONBOOT=yes DEVICETYPE=ovs TYPE=OVSPort OVS_BRIDGE=br0 NM_CONTROLLED=no BOOTPROTO=none HOTPLUG=no DEVICE=eth1 ONBOOT=yes DEVICETYPE=ovs TYPE=OVSPort OVS_BRIDGE=br0 NM_CONTROLLED=no BOOTPROTO=none HOTPLUG=no On Thu, Mar 14, 2013 at 9:50 PM, Gurucharan Shetty <[email protected]>wrote: > On Thu, Mar 14, 2013 at 10:37 AM, Denis Iskandarov > <[email protected]> wrote: > > Fail: > > Log shows that script only removes ports from bridge. > > Not removing bridge as previous script does (i don't know if it's > actually > > neded). > > Main it can't create bridge in the and assign ports to it. > > Ports not leaving/entering promiscuous mode. > > > >> Mar 14 21:27:34 ovs-cent64 ovs-vsctl: 00001|vsctl|INFO|Called as > ovs-vsctl > >> -t 10 -- --if-exists del-port br0 eth0 > >> Mar 14 21:27:34 ovs-cent64 ovs-vsctl: 00001|vsctl|INFO|Called as > ovs-vsctl > >> -t 10 -- --if-exists del-port br0 eth1 > >> Mar 14 21:27:34 ovs-cent64 kernel: lo: Disabled Privacy Extensions > >> Mar 14 21:27:34 ovs-cent64 /etc/sysconfig/network-scripts/ifup-eth: > Device > >> br0 does not seem to be present, delaying initialization. > >> Mar 14 21:27:34 ovs-cent64 kernel: e1000: eth0 NIC Link is Up 1000 Mbps > >> Full Duplex, Flow Control: None > >> Mar 14 21:27:34 ovs-cent64 kernel: ADDRCONF(NETDEV_UP): eth0: link is > not > >> ready > >> Mar 14 21:27:34 ovs-cent64 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link > >> becomes ready > >> Mar 14 21:27:34 ovs-cent64 kernel: e1000: eth1 NIC Link is Up 1000 Mbps > >> Full Duplex, Flow Control: None > >> Mar 14 21:27:34 ovs-cent64 kernel: ADDRCONF(NETDEV_UP): eth1: link is > not > >> ready > >> Mar 14 21:27:34 ovs-cent64 kernel: ADDRCONF(NETDEV_CHANGE): eth1: link > >> becomes ready > > > > > > Any other helpful info I can provide? > Whats the configuration (ifcfg-* ) that you are using. > Can you clean up your bridges (ovs-vsctl del-br $bridge_name; > ovs-vsctl show) and then repeat the test? It is possible that you have > some manually created bridges(or remnants during previos changes) in > which case, the script won't attempt to configure it. >
_______________________________________________ dev mailing list [email protected] http://openvswitch.org/mailman/listinfo/dev
