Signed-off-by: Gurucharan Shetty <[email protected]>
---
INSTALL.RHEL | 6 ++++++
INSTALL.XenServer | 13 ++++++++++++-
2 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/INSTALL.RHEL b/INSTALL.RHEL
index eaa2e7c..a698fae 100644
--- a/INSTALL.RHEL
+++ b/INSTALL.RHEL
@@ -101,6 +101,12 @@ RHEL. On RHEL 5, the default RPM source directory is
in this example: "kmod-openvswitch", "kmod-openvswitch-debug", and
"kmod-openvswitch-kdump".
+A RHEL host has default firewall rules that prevent any Open vSwitch tunnel
+traffic from passing through. If a user configures Open vSwitch tunnels like
+GRE, VXLAN, LISP etc., they will either have to manually add iptables firewall
+rules to allow the tunnel traffic or add it through a startup script (Please
+refer to the "enable-protocol" command in the ovs-ctl(8) manpage).
+
Red Hat Network Scripts Integration
-----------------------------------
diff --git a/INSTALL.XenServer b/INSTALL.XenServer
index 7a4dd76..e31788a 100644
--- a/INSTALL.XenServer
+++ b/INSTALL.XenServer
@@ -158,7 +158,10 @@ command. The plugin script does roughly the following:
* If XAPI is configured for a manager, configures the OVS
manager to match with "ovs-vsctl set-manager".
-The Open vSwitch boot sequence only configures an OVS configuration
+Notes
+-----
+
+* The Open vSwitch boot sequence only configures an OVS configuration
database manager. There is no way to directly configure an OpenFlow
controller on XenServer and, as a consequence of the step above that
deletes all of the bridges at boot time, controller configuration only
@@ -166,6 +169,14 @@ persists until XenServer reboot. The configuration
database manager
can, however, configure controllers for bridges. See the BUGS section
of ovs-controller(8) for more information on this topic.
+* The Open vSwitch startup script automatically adds a firewall rule
+to allow GRE traffic. This rule is needed for the XenServer feature
+called "Cross-Host Internal Networks" (CHIN) that uses GRE. If a user
+configures tunnels other than GRE (ex: VXLAN, LISP), they will have
+to either manually add a iptables firewall rule to allow the tunnel traffic
+or add it through a startup script (Please refer to the "enable-protocol"
+command in the ovs-ctl(8) manpage).
+
Reporting Bugs
--------------
--
1.7.9.5
_______________________________________________
dev mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/dev
