I think this would be a bit cleaner if we ditched the has_rx flag.
Instead, each time we go through the run loop, we can check if we've
received any packets, if we have, we reset to rx_detect_time to now +
bfd_min_rx * mult. Then in bfd_forwarding() when forwarding_if_rx is
enabled, we only have to check if the rx_detect_time has passed or
not.
> + if (diff < 0) {
> + VLOG_WARN("rx_packets count is smaller than last time.");
> + }
> + bfd->rx_packets = rx_packets;
> + bfd->has_rx = (diff > 0);
> + incr = bfd_rx_interval(bfd) * bfd->mult;
> + bfd->rx_detect_time = (incr > 2000 ? incr : 2000) + time_msec();
This would be easier to read as MAX(incr, 2000). Also it deserves a
comment explaining why we're setting 2000 as the minimum
rx_detect_time. That number seems awfully high to me at any rate, I'd
feel better if we set it to 1000, and made (in a separate patch) made
ofproto-dpif pull stats from the datapath at least once every 800ms so
we have time to grab our stats and update the bfd module.
Ethan
X-CudaMail-Whitelist-To: [email protected]
_______________________________________________
dev mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/dev
