Signed-off-by: Joe Stringer <[email protected]>
---
tests/cfm.at | 38 ++++++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/tests/cfm.at b/tests/cfm.at
index 9e351d0..8e5917d 100644
--- a/tests/cfm.at
+++ b/tests/cfm.at
@@ -96,4 +96,42 @@ CFM_VSCTL_LIST_IFACE([p0], [cfm_flap_count], [cfm_flap_count
: 2])
CFM_VSCTL_LIST_IFACE([p1], [cfm_flap_count], [cfm_flap_count : 0])
OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([cfm - fault_override])
+OVS_VSWITCHD_START([add-br br1 -- \
+ set bridge br1 datapath-type=dummy \
+ other-config:hwaddr=aa:55:aa:56:00:00 -- \
+ add-port br1 p1 -- set Interface p1 type=patch \
+ options:peer=p0 -- \
+ add-port br0 p0 -- set Interface p0 type=patch \
+ options:peer=p1 -- \
+ set Interface p0 cfm_mpid=1 other_config:cfm_interval=100
other_config:cfm_extended=true -- \
+ set Interface p1 cfm_mpid=2 other_config:cfm_interval=100
other_config:cfm_extended=true])
+
+ovs-appctl time/stop
+# wait for a while to stablize cfm.
+for i in `seq 0 100`; do ovs-appctl time/warp 100; done
+CFM_CHECK_EXTENDED([p0], [1], [100], [up], [up], [100ms], [2], [up])
+CFM_CHECK_EXTENDED([p1], [2], [100], [up], [up], [100ms], [1], [up])
+AT_CHECK([ovs-appctl cfm/show p1 | grep 'fault_override'], [1], [ignore])
+CFM_VSCTL_LIST_IFACE([p1], [cfm_fault_status], [cfm_fault_status : [[]]])
+
+# set a fault and see that this is shown in the CFM module and the database
+AT_CHECK([ovs-appctl cfm/set-fault p1 true], [0], [OK
+])
+AT_CHECK([ovs-appctl time/warp 100], [0], [ignore])
+AT_CHECK([ovs-appctl cfm/show p1 | grep 'fault_override' | sed -e 's/MPID
[[0-9]]*: extended //'], [0], [dnl
+fault_override
+])
+CFM_VSCTL_LIST_IFACE([p1], [cfm_fault_status], [cfm_fault_status :
[[override]]])
+
+# reset and see that it returned to normal
+AT_CHECK([ovs-appctl cfm/set-fault normal], [0], [OK
+])
+AT_CHECK([ovs-appctl time/warp 100], [0], [ignore])
+AT_CHECK([ovs-appctl cfm/show p1 | grep 'fault_override'], [1], [ignore])
+CFM_VSCTL_LIST_IFACE([p1], [cfm_fault_status], [cfm_fault_status : [[]]])
+
+OVS_VSWITCHD_STOP
AT_CLEANUP
\ No newline at end of file
--
1.7.9.5
_______________________________________________
dev mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/dev
