Added the commands to be able to install an unsigned driver. Acked-by: Nithin Raju <[email protected]> ---
v2: Added Acked-by. INSTALL.Windows.md | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/INSTALL.Windows.md b/INSTALL.Windows.md index 0029500..0dd5cda 100644 --- a/INSTALL.Windows.md +++ b/INSTALL.Windows.md @@ -162,7 +162,12 @@ Steps to install the module 02> Run ./install.cmd to insert the new one. For this to work you will have to turn on TESTSIGNING boot option or 'Disable Driver Signature Enforcement' -during boot. +during boot. The following commands can be used: + % bcdedit /set LOADOPTIONS DISABLE_INTEGRITY_CHECKS + % bcdedit /set TESTSIGNING ON + % bcdedit /set nointegritychecks ON + +Note: you may have to restart the machine for the settings to take effect. 03> In the Virtual Switch Manager configuration you can enable the Open vSwitch Extension on an existing switch or create a new switch. If you are using an -- 1.8.5.6 _______________________________________________ dev mailing list [email protected] http://openvswitch.org/mailman/listinfo/dev
